Presentation is loading. Please wait.

Presentation is loading. Please wait.

Introduction HBE-RFID-REX

Similar presentations


Presentation on theme: "Introduction HBE-RFID-REX"— Presentation transcript:

1 Introduction HBE-RFID-REX
1

2 Basic components of HBE-RFID-REX
Basic principle: Wireless communication schemes such as coding and modulation Reader: Antenna technology and band-by-band reader technologies Embedded system: Handheld-reader technology applied to an embedded system HBE-RFID-REX Features RFID system 기본원리 이해를 위한 신호측정 125Khz LF와 13.56Mhz HF Reader Air-interface 표준화 RFID 응용소프트웨어 Embedded System과 결합된 Reader의 응용 2

3 Components of HBE-RFID-REX
Name of Module Function Principle Part 1 Encoding Data generation and 2 Decoding Data Decoding 3 ASK ASK modulation 4 F S K FSK modulation 5 PSK PSK modulation Reader 6 * 125Khz & 13.56Mhz readers *Another band (900 MHz) Available Embedded System 7 LCD 4-inch wide LCD 8 X-module CPU-PXA255/Win CE 5.0 9 Base board Power supply & I/O port

4 PART of RFID Principle HBE-RFID-REX
RFID is data communication between Reader and Tag Basic principle: Wireless communication schemes such as coding and modulation 4

5 Coding Part – Signal Encoding & Decoding)
HBE-RFID-REX Coding Part – Signal Encoding & Decoding) Signal coder-encoder &Decoder 64bit format Monitoring 8bit format Monitoring Coding Data NRZ/RZ/Manchester0/Manchester1/ Bi-phase/Miller Device CPU : Atmega128 CPLD : CPLD 5

6 HBE-RFID-REX Modulation & Demodulation Part ASK. FSK, PSK Modem
ASK. FSK, PSK Modulation & Demodulation Signal Monitoring Check wave form by Test Point NRZ/RZ/Manchester/Bi-phase/Miller Propagation Make sure that there is no tag backscattering. The process of power supply to a tag 6

7 PART of RFID Reader HBE-RFID-REX 125kHz Reader 13.56MHz Reader
7

8 RFID Reader & Antenna HBE-RFID-REX A. Operation Forms B. Base Bands
reader is typically run in one of the following three forms: - Combined to the base, non-combined/independent, or combined with a handheld reader. B. Base Bands Independent readers are replaceable by others. 125KHz reader: No chipset is used. 13.56MHz reader: An exclusive chipset is used for EM4094 of EM Microtronics. C. Practice in Antenna 1) Transmit data using inductive coupling. - Send data through RLC resonance. - Use impedance matching in practice. 2) Measure the recognition distance of a tag in practice. 3) Find properties of antennas according to their shapes. Extension Single Reader by PC Hand held reader by Embedded Module Extend Application with ZigbeX, Bluetooth 8

9 HBE-RFID-REX 125kHz Reader & Coil antenna
900MHz Reader & Patch antenna 13.56MHz Reader & PCB antenna

10 HBE-RFID-REX 구성

11 Embedded Part HBE-RFID-REX LCD Module PXA-255 Module
4” Wide LCD With Touchpad UART-ZigbeX/Bluetooth module PXA-255 Module CPU : intel PXA-255 OS : WinCE 5.0 Connection Wired LAN/Full UART 11

12 A handheld reader using an embedded system
HBE-RFID-REX A handheld reader using an embedded system WinCE 응용 실습 예 12

13 PC Application HBE-RFID-REX 13.56MHz Reader
125kHz Reader PC application 13.56MHz Reader 900MHz Reader Experiment Visual C++ for 125kHz/13.56MHz Reader


Download ppt "Introduction HBE-RFID-REX"

Similar presentations


Ads by Google