1. Water Damaged Electronics
Short & Simple • © 2016 Thinkshortcut Publishing, LLC • Created by MarketingZoo.com
Before any of this happens, you should protect your data, which is often more valuable than the device itself. Use a good online storage program. The best bet, however, with water damaged electronics is to call your water damage professionals right away. Odds are, they have a contents restoration specialist on staff who can give you the guidance and help you need.
Water Damaged Electronics
It’s a terrible sinking feeling (pun intended) you get when you drop your iPhone, iPad or Android — or other expensive hand-held electronic device — into water, such as a sink, bathtub or (gross) toilet.
When that happens, you respond quickly. You dip your hand into the offending reservoir, grab the device and shake it vigorously, hoping against all odds that you can force all moisture out before permanent damage occurs.
You may even dunk your device into a bag of rice, hoping that online tip you read about rice pulling moisture from electronic devices is true. You may submit it mercilessly to the business end of a hairdryer until it is too hot to hold.
What’s the best thing to do when electronic devices suffer from water damage?
Some devices are water-resistant or water-proof. If that’s the case, quickly removing the device from the water and drying it might be all you need to do, along with hoping the manufacturer wasn’t overselling this benefit. Replacement might be the only option. Check your warranty. It may cover this type of accident.
If your device is the victim of a direct spray of water, quickly wiping it down, removing the battery (if possible) and cleaning as much of the interior as possible may solve the problem. With the power off, put the device under a heat lamp or even in direct sunlight — but not for too long. Too much direct heat can cause damage. The rice trick mentioned earlier only works for that last little bit of residual moisture. Remove as much moisture as you can before using rice or other absorbent compounds.
If your device, once dried, seems to work… that’s good. But don’t be surprised if you notice a decrease in performance over time. Residues can cause future problems, even resulting in total loss of power or performance.

2. The Basics of Spot Removal
3 copy
Short & Simple • © 2016 Thinkshortcut Publishing, LLC • Created by MarketingZoo.com
Remember, if you do your own spot removal, there is some danger of removing original fabric color and causing other damage. Take your time and do it right. Pretesting fiber and solution compatibility is always recommended. And when in doubt (or when a spot stumps you) always do the very best thing: Call your cleaning professional right away!
The Basics of Spot Removal
It’s a good feeling. You have a beautiful home, you spend time keeping it in perfect shape, and your brand-new carpet is the icing on the cake. It’s soft, comfortable and clean.
Then one day, you notice (gasp) a spot right in the middle of the living room. There’s no way you can live with that eyesore. It has got to go. What do you do?
Here are a few tips to basic spot removal. Don’t forget that a spot can really be a stain, which needs professional attention.
Identify
Do your best to visually identify the spot. Some spots are easy; others are pretty tough. It’s not always possible to identify the spotting substance in the carpet. Yet, a little sleuthing on your part can get you close. Where is the spot? Is it near the dining room or where those in the family might eat? Odds are, it’s food related, and you might find success with a spotting solution for sticky residues. Is it in a bedroom? Could be cosmetic, shoe polish or other substance common to getting ready for the day, and you might find success with a dry solvent spotter.
Apply product
When you have figured out as best you can the type of spot you have, choose a reputable product for that particular spot. Some of the best spotting solutions can be obtained from your carpet cleaning company. Ask them what they recommend.
Blot
Next comes removal. Carefully blot the spot. Do not scrub. You will damage the tips of the fibers and there’s nothing short of replacement to fix that. Keep applying and blotting product until the spot is gone.