1. Lantern plans by Master Dafydd and Master Terafan
5.75”
3.5”
3 1/8”
2.5”
3 1/8”
2.5”
3.5”
5.75”
Base for lifting the candle/lamp up for lighting/refilling
4 decorative side pieces (1/4” thick)
Top
3/4”
Glass for
the sides
3.5” x 6”
(4 pieces) 8” 6”
4.75”
4 square corner
columns with grooves cut
4.75”
1/4” wooden dowel
Bottom

2. 4 square corner columns with grooves cut in two sides
5.75”
Screw holes
Groove for glass
Groove for decorative side
2.5”
5.75”
Holes for the rope
Groove for the glass runs the length of the column
Hole for the lifting
dowel
Top
The hole in the center (of the top) must be large enough for your lamp/candle to be taken out.
Groove for the decorative side only goes 3.5” down
Glass
Decorative side
4.75”
4.75”
4 square corner columns with grooves cut in two sides
Bottom