1. REPAIRING SMALL DAMAGE ONPANEL (PATCHING)
EXECUTING REFORMING OF PANEL IN SMALL DAMAGE
BODY OTOMOTIF (F-022)
SK – KD 04

2. TARGET OF LEARNING ACTIVITY
Educative participant can know steps forming panel in vehicle body
Educative participant can know the way of forming panel in body because small damage
Teknologi dan Rekayasa

3. DEFINITION OF INCISION
Incision is hollowing which like rill in surface.
Dot where sheet become incision called " point yield".
Teknologi dan Rekayasa

4. REPAIR OF DAMAGE PANEL
If the panel will be repaired can dissociated, release the shares and put down on flat area
Teknologi dan Rekayasa

5. REPAIR OF DAMAGE PANEL
Eliminating all flammable material including deadener in incised area
Teknologi dan Rekayasa

6. REPAIR OF DAMAGE PANEL
Start from wrong tip of metal where the incision became, form “spot hot".
Teknologi dan Rekayasa

7. REPAIR OF DAMAGE PANEL
With base, knock the damage part when the metal still hot and immediately cooled with wet mop
Teknologi dan Rekayasa

8. REPAIR OF DAMAGE PANEL
Repeat the hot shrinking process as long as incision until all shares return to form initialy
Teknologi dan Rekayasa

9. REPAIR OF DAMAGE PANEL Terminating with final work (metal finishing)
Teknologi dan Rekayasa