1. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Cooling system example

2. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Example cooling system temperature distribution

3. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Cooling system temperature distributions: Tw1(x)<Tlim

4. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Cooling system temperature distributions: Tw1(x)=Tlim

5. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Quasi-2D generalized cooling system temperature distributions; effect of increasing coolant exit temperature

6. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Approximation relating cooling efficiency, nondimensional mass flow rate, HTC ratio, and Biot number

7. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Approximation relating the mean film cooling effectiveness to the nondimensional mass flow for known reference conditions

8. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Overall cooling effectiveness as a function of nondimensional mass flow and Biot number, for HPNGV-typical wall/film properties

9. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Overall cooling effectiveness as a function of nondimensional mass flow and Biot number, for the start of a typical effusion cooling system

10. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Overall cooling effectiveness as a function of nondimensional mass flow and Biot number, for the end of a typical effusion system

11. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Effect of TBC on TBC overall cooling effectiveness as a function of nondimensional mass flow, for the boundary conditions in Fig. 10

12. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Effect of TBC on overall cooling effectiveness (external wall) as a function of nondimensional mass flow, for the boundary conditions in Fig. 10

13. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Temperature distribution representative of the suction-side of an HPNGV

14. Date of download: 10/24/2017
Copyright © ASME. All rights reserved.
From: Cooling Optimization Theory—Part I: Optimum Wall Temperature, Coolant Exit Temperature, and the Effect of Wall/Film Properties on Performance
J. Turbomach. 2016;138(8): doi: /
Figure Legend:
Ratio of optimized to unoptimized nondimensional mass flow for a nonisothermal system