Presentation is loading. Please wait.

Presentation is loading. Please wait.

ETERNUS DX100 S3, DX200 S3, DX500 S3 and DX600 S2

Similar presentations


Presentation on theme: "ETERNUS DX100 S3, DX200 S3, DX500 S3 and DX600 S2"— Presentation transcript:

1 ETERNUS DX100 S3, DX200 S3, DX500 S3 and DX600 S2
Fujitsu Training Documentation NAS Functionality ETERNUS DX S3 ETERNUS DX100 S3, DX200 S3, DX500 S3 and DX600 S2 NAS Functionality NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

2 Fujitsu Training Documentation
NAS Functionality ETERNUS DX S3 Content Comparison of SAN and NAS Introduction to Unified Storage ETERNUS DX S3 Unified Architecture ETERNUS DX S3 Unified Storage NAS Setup NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

3 Comparison of SAN and NAS
Fujitsu Training Documentation Comparison of SAN and NAS NAS Functionality ETERNUS DX S3 Items SAN NAS Network FC-SAN (Fibre channel) IP-SAN (TCP/IP network ) TCP/IP network Protocol FC-SAN IP-SAN ( iSCSI, FCIP, iFCP ) CIFS, NFS Zoning Available Not available Cost High price Low price Performance High performance Low performance Depends on existing LAN  Operation/Maintenance Good - Complicated Excellent - Simple Installation difficulty Good - High skill & knowledge is necessary Very Good - Connectable to existing LAN Configuration example Storage integration by SAN Storage integration of file servers NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

4 Introduction to Unified Storage
Fujitsu Training Documentation Introduction to Unified Storage NAS Functionality ETERNUS DX S3 Separated SAN (Storage Area Network) and NAS (Network Attached Storage) environments has two main disadvantages Unified storage provides both functionalities in one system Consolidation of file based on block based access in a single storage system Support for Fibre Channel SAN, IP-based SAN (iSCSI) and NAS Enables storing of file data (shares) and use of block-based I/O (input/output) of enterprise applications 1. There is a need to learn separate management operations 2. Unable to share resources Different GUI/CLI 80% 20% SAN storage NAS storage - Increase of operation costs and man hours - Low utilization of storage infrastructure NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

5 ETERNUS DX S3 Unified Architecture (1)
Fujitsu Training Documentation ETERNUS DX S3 Unified Architecture (1) NAS Functionality ETERNUS DX S3 Block and file access run within the same Controller Module Enabling higher storage consolidation Reducing operational complexity All ETERNUS DX S3 Entry and Midrange models have the same unified functionality and management environment All models are available either as a Unified or Block variant Unified with both SAN and NAS functionality Block with SAN only1) One System Console (GUI/CLI) Block Access File Access One System Control 1) Field upgrade option scheduled for 1H2014 NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

6 ETERNUS DX S3 Unified Architecture (2)
Fujitsu Training Documentation ETERNUS DX S3 Unified Architecture (2) NAS Functionality ETERNUS DX S3 SAN & NAS controlled via the same Controller Module Simple installation; no NAS gateway Easy migration from SAN to Unified by adding1) Ethernet interface card to the CM that supports unified architecture Supported file sharing protocols are CIFS and NFS SAN I/O NAS I/O SAN I/O CM#0 OS=VxWorks64 CM#1 OS=VxWorks64 CM#0 OS=VxWorks64 CM#1 OS=VxWorks64 Block I/O FC / iSCSI System memory 128 GB 2) SAN Samba SAN Samba Hypervisor Block I/O via FC / iSCSI File Share I/O via Ethernet Sys. memory 128 GB 1) Sys. memory 64 GB 1) SAN VOLUME SAN VOLUME NAS VOLUME 1) Field upgrade option scheduled for 1H2014 2) Example DX600 S3 NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

7 ETERNUS DX S3 Unified Storage
Fujitsu Training Documentation ETERNUS DX S3 Unified Storage NAS Functionality ETERNUS DX S3 ETERNUS DX S3 systems can be ordered either ex-factory or upgraded in the field1) with an Ethernet CA that allows Unified functionality SAN (Block access) LAN (File access) Ethernet interface card (1G/10G) ETERNUS DX S3 series 1) Field upgrade option scheduled for 1H2014 NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

8 Fujitsu Training Documentation
NAS Functionality ETERNUS DX S3 Setup NAS Initial Setup NAS Setup NAS Interface Setup NAS Shared Folders NAS Backup & Restore with SF Manager NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

9 Fujitsu Training Documentation
Initial NAS Setup NAS Functionality ETERNUS DX S3 NAS and three Sys Volumes must be created in the TPP first The names and sizes of the three SysVols are fixed and cannot be changed The name and size of the NAS Volume is defined by the administrator 300 GByte is always reserved for ETERNUS internal use SysVol1 SysVol2 SysVol3 1 GByte 8 GByte 8 GByte NAS_Vol_0 300 GByte Meta Data Customer defined capacity Customer shareable area NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

10 Fujitsu Training Documentation
Setup of NAS Interface NAS Functionality ETERNUS DX S3 For a better load balancing an Active/Active configuration is recommended Active/Stand-By and a Single-Active configuration are allowed, too SysVol1 SysVol2 SysVol3 1 GByte 8 GByte 8 GByte NAS_Vol_0 300 GByte Meta Data Customer defined capacity Customer shareable area CM#0 CM#1 Ethernet CA#0-P#0 Active Active Server-1 L A N Server-2 NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

11 Setup of NAS Shared Folders
Fujitsu Training Documentation Setup of NAS Shared Folders NAS Functionality ETERNUS DX S3 Shared Folders reside in shareable area of the NAS Volume The owner can be managed via user authentication server (AD or LDAP) Local owner has got default values: "shareuser$" and password "share!" SysVol1 SysVol2 SysVol3 1 GByte 8 GByte 8 GByte NAS_Vol_0 300 GByte Meta Data Customer defined capacity Customer shareable area \NAS-CIFS1 \NAS-CIFS2 CM#0 CM#1 Ethernet CA#0-P#0 Net Mount Net Mount Server-1 \\ \NAS-CIFS1 L A N Server-2 \\ \NAS-CIFS2 NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

12 NAS Backup & Restore with SF Manager
Fujitsu Training Documentation NAS Backup & Restore with SF Manager NAS Functionality ETERNUS DX S3 Backup the whole NAS Volume with QOPC The content of the shared folders can be recovered from the shared backup folders with the help of operating system mechanisms SysVol1 SysVol2 SysVol3 1 GByte 8 GByte 8 GByte NAS_Vol_0 NAS_Vol_0$back0 300 GByte Meta Data QOPC: Forward & Reverse Copy 300 GByte Meta Data Customer defined capacity Customer shareable area \NAS-CIFS1 \NAS-CIFS1$back \NAS-CIFS2 \NAS-CIFS2$back CM#0 CM#1 Ethernet CA#0-P#0 Net Mount Net Mount Server-1 \\ \NAS-CIFS1 L A N Server-2 \\ \NAS-CIFS2 \\ \NAS-CIFS1$back \\ \NAS-CIFS2$back NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

13 Consolidated Management
Fujitsu Training Documentation Consolidated Management NAS Functionality ETERNUS DX S3 SAN and NAS can be managed using the same management interface ETERNUS Web GUI (for ETERNUS DX) and SF Manager V16 Web Console NAS setup Shared Folder SAN setup Host Affinity NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014 Copyright Fujitsu, Release May 2014

14 Fujitsu Training Documentation
NAS Functionality ETERNUS DX S3 Copyright Fujitsu, Release May 2014


Download ppt "ETERNUS DX100 S3, DX200 S3, DX500 S3 and DX600 S2"

Similar presentations


Ads by Google