1. How to setup VRT-402N with VRT-401/311S?

2. Outline
Connections Topology
VRT-402N setup
VRT-401 setup

3. Connection Topology
Tunneling

4. VRT-402 Setup In Security – VPN/ ISEC
Key in the pre-share key , example on “12….0”
Select the rest configuration where should match to VRT-401.
Key in VRT-401’s LAN IP Subnet and the netmask
Key in VRT-401’s WAN IP Address
Add New Policy
Save Settings!!
Confirm the settings

5. In VPN -> VPN Polices
VRT-401 Setup - 1/2
In VPN -> VPN Polices
Key in VRT-402N’s WAN port IP Address.
Key in the local IP subnet and mask of VRT-401
Key in the remote IP subnet and mask. I.e. VRT-402N’s subnet
Select phase 1 encryption
Select phase 2 encryption & key in the pre-share key
Select phase 1, 2 PFS group
Add a new Policy
Save the configuration

6. VRT-401 Setup - 2/2 In VPN -> VPN Status Check the VPN status.
Here shows the success status

7. Hint At VRT-401 Connection fail This example also applies to:
You can check the log to see the information, if you encounter some connection issues.
Connection fail
For most of the time, IF you failed in the connection, it could be IP setup issues. Please do check:
Have you key in the correct WAN IP for both ends.
Have you key in the correct IP Subnet for both ends.
Have you choose the correct Encryption for both ends. Say, Phase 1, phase 2.
This example also applies to:
VRT-311S