1. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Turbulence Characteristics of Flow Under Combined Wave–Current Motion
J. Offshore Mech. Arct. Eng. 2017;139(2): doi: /
Figure Legend:
Schematic diagram of the flume

2. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Turbulence Characteristics of Flow Under Combined Wave–Current Motion
J. Offshore Mech. Arct. Eng. 2017;139(2): doi: /
Figure Legend:
Plot of the normalized error for the mean flow at measurement section

3. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Turbulence Characteristics of Flow Under Combined Wave–Current Motion
J. Offshore Mech. Arct. Eng. 2017;139(2): doi: /
Figure Legend:
Normalized profile of (a) streamwise and bottom-normal mean velocities (û and ŵ), (b) streamwise turbulence intensity (Iu), (c) bottom-normal turbulence intensity (Iw), and (d) Reynolds shear stress (τ̂) based on present measurements on a flat surface. Here, the parameters are Bu = 1.9, Bw = 0.98, Cu = 1.04, and Cw = 0.51.

4. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Turbulence Characteristics of Flow Under Combined Wave–Current Motion
J. Offshore Mech. Arct. Eng. 2017;139(2): doi: /
Figure Legend:
Normalized streamwise mean velocity profiles for combined wave–current flow. (a)–(c) represents velocity profiles f = 0.6, 1.5, and 2.5 Hz, respectively. Velocity profile for current-only is also presented for reference and the solid line represents the profile calculated by using Eqs. 10 and 11.

5. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Turbulence Characteristics of Flow Under Combined Wave–Current Motion
J. Offshore Mech. Arct. Eng. 2017;139(2): doi: /
Figure Legend:
Vertical profiles of turbulence intensities for wave–current flow along with current-only is also presented for reference; (a) phase-averaged streamwise turbulent intensity and (b) phase-averaged bottom-normal turbulent intensity

6. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Turbulence Characteristics of Flow Under Combined Wave–Current Motion
J. Offshore Mech. Arct. Eng. 2017;139(2): doi: /
Figure Legend:
Calculated mean phase-averaged Reynolds stress [14,18] profile for wave–current flow along with current-only is also presented for reference

7. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Turbulence Characteristics of Flow Under Combined Wave–Current Motion
J. Offshore Mech. Arct. Eng. 2017;139(2): doi: /
Figure Legend:
Probability density function (PDF) of streamwise velocity component for both current only and wave-induced cases: (a) at z/h = 0.02, (b) at z/h = 0.10, and (c) at z/h = 0.6