1. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Predicting Distal Radius Bone Strains and Injury in Response to Impacts Using Multi-Axial Accelerometers
J Biomech Eng. 2012;134(10): doi: /
Figure Legend:
Experimental setup for the cadaver radius specimens in the pneumatic impactor

2. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Predicting Distal Radius Bone Strains and Injury in Response to Impacts Using Multi-Axial Accelerometers
J Biomech Eng. 2012;134(10): doi: /
Figure Legend:
A distal radius specimen showing the locations of the three strain gauges and the two accelerometers. The locations of the sigmoid fossa and the radial styloid have been included to orient the position of the radius.

3. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Predicting Distal Radius Bone Strains and Injury in Response to Impacts Using Multi-Axial Accelerometers
J Biomech Eng. 2012;134(10): doi: /
Figure Legend:
Typical distal and proximal axial acceleration (a) and gauge 1 and gauge 3 minimum principal strain (b) curves for a prefracture impact event. The vertical lines represent the times to peak for each respective curve.

4. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Predicting Distal Radius Bone Strains and Injury in Response to Impacts Using Multi-Axial Accelerometers
J Biomech Eng. 2012;134(10): doi: /
Figure Legend:
Typical fracture patterns experienced by the distal radius following ultimate failure shown on the articular surface (a) and into the dorsal aspect of the diaphysis (b)

5. Date of download: 10/25/2017
Copyright © ASME. All rights reserved.
From: Predicting Distal Radius Bone Strains and Injury in Response to Impacts Using Multi-Axial Accelerometers
J Biomech Eng. 2012;134(10): doi: /
Figure Legend:
Mean (SD) shock wave velocities calculated from the times of the peak strains and the peak accelerations (*p < 0.05)