1. Production product catalog
NOTOS.,CO.LTD
16BLOCK-2LOT NAMDONG INDUSTRIAL
COMPLEX NONHYEON-DONG NAMDONG-GU , KOREA
TEL :
FAX :
HOMEPAGE :

2. POOL & SPA PUMP MOTOR. Pool & Spa Motor
This is the motor for Pool & Spa pump that operate for a long time in both indoor and outdoor installations. It is a centrifugal pump that is mainly used for supplying hot and cold water and for filtering. For water drainage pump used in swimming pools and hot spring baths, the high endurance electric motor requires sufficient drainage capability, NOTOS electric motor provides the solution for this entire requirement.

3. POOL & SPA PUMP MOTOR.

4. BLDC MOTOR 3PH, 4P, 240V, 50Hz, 0.75KW~1.5KW TYPE Rated Power (kW)
Part No.
Insulation Class
Measure (mm)
Bearing No. 4P L ΦA ΦB C O D ΦK S
Front
Rear 3P
0.75
71420 F
300
146.3
181 17
289
166.5 11
1/2"x20 UNF 2A R. HAND
6203DD
1.5
71422

5. 3Phase FAN MOTOR

6. 3 PHASE TEFC FLANGE TYPE
3PH, 2P/4P/6P/8P, 220/380V, 50/60Hz, 0.4KW~5.5KW
Insulationclass
Rated Power (kW)
Measure (mm)
Bearing No. 2P 4P 6P 8P L ΦA ΦB C O E AB ΦM ΦP ΦK ΦD W U T
Front
Rear B ㅡ
0.4
270
110 j6
130 30
240
115
160
132 10
14 j6 5 3
6203zz
6202zz
0.75
0.4/0.75
293
130 j6
165 40
253
140
200
175 12
19 j6 6
3.5
6204zz
1.5/2.2
1.5
310 50
260
125
24 j6 8 4 7
6205zz
2.2
370
180 j6
215 60
250 15
28 j6
6206zz F
5.5
3.7
498
230 j6
265 80
418
213
300
274
38 j6
6208zz

7. HOIST MOTOR 3PH, 4P/6P, 220/380V, 60Hz, 0.5KW~5.5KW TYPE
Rated Power (kW)
Frame No.
Insulation class
Picture
Measure (mm)
Bearing No. 4P 6P L O C H E ΦP
Front
Rear JW
0.75/1.5
0.5/1.0
90L F
P-A
310 ㅡ
22.5
245
125
175
6205zz
6204zz JO
P-B
288
1.5
212 JE
2.2/3.7
1.5/2.2
100L
P-C
436
373 63
235
140
203
6306zz
6305zz JN JP
5.5
132
P-D
462
451 11
332
198
6308zz
6307zz

8. 1,3 Phase FAN MOTOR – BW TYPE
FIG.2
FIG.1

9. DOUBLE INLET DIRECT DRIVE FAN MOTOR
FIG.3
FIG.4

10. THREE PHASE INDUCTION MOTOR.
▲ Characteristic
Perfect airtight structure.
Aluminum frame and cover to applied realization with lighter weight. .
By efficient design, cooling effect is superior, temperature upswing is less
Low noise ,low vibration, creating a pleasant environment.
Coating processing exterior are gorgeous and strong corrosion
▲ Application field
Industry machine and mutual assistance field .
power ( kw)
FRAME NO.
dimensions 2P 4P 6P 8P H E1 E2 C PB L K 축 D
D공차 Q F T
0.75
0.4/0.75 -
80M 80
62.5 50
100
188 10 19 j6 40 6
3.5
1.5
90L 90 70 56
119
220 24 8 4
2.2
100L 63
133
244 12 28 60
3.7
112M
112 95
140
265
5.5
132S
132
108 89
159
290 38 k6 5

11. 1,3 PHASE FAN MOTOR – B TYPE ▲ Characteristic
Perfect airtight structure.,
Output contrast realization with lighter weight.
By efficient design, cooling effect is superior, temperature upswing is less.
Low noise, low vibration, creating a pleasant environment.
Coating processing exterior are gorgeous and strong corrosion
Temperature upswing is less by structure and cooling effect.
▲ Application field
FAN for industry machine and mutual assistance, BROWER motor application .

12. ONE PHASE STARTING MOTOR.

13. Ingress protection class
FANCOIL UNIT MOTOR
▲ Characteristic
By efficient design, Cooling effect is superior ,temperature upswing is less.
Low noise, low vibration, creating a pleasant environment .
By gilt shredder case. Exterior are gorgeous and strong corrosion
▲ Application field
FAN for industry machine and mutual assistance ,BROWER MOTOR application .
INSULATION SYSTEM
Ingress protection class
Specification.
B,F CLASS
IP44
ONE PHASE 6P 25W ~ 65W
ONE PHASE 4P 25W ~ 65W

14. Ingress protection class
TWIN SHAFT MOTOR
▲ Characteristic
By efficient design, Cooling effect is superior, temperature upswing is less.
Low noise , low vibration, creating a pleasant environment .
Coating processing exterior are gorgeous and strong corrosion.
▲ Application field
FAN for industry machine and mutual assistance and Beuroa motor application .
Phase.
Specification.
VOLT Hz
OUTPUT(Kw)
SHAFT BOSS Ø
INS.
Ingress protection class 4P 6P 8P
12P 3Ø
100~240
50,60
0.75
0.5
0.4
0.25
15,17,19
B,F 54 1Ø
20,25

15. DRYIER MOTOR
1PH, 2P/4P/6P, 220/380V, 60Hz, 0.4KW~5.5KW

16. WATER MIST ▲ Characteristic
As domestic only a water spay, atomizing as high pressure pump of around 25 micron
of water atomizing by fine particles such as fog .
The remote injection to relive the heat at ambient as lowering the temperature 3℃ .
Distant water injection into the dust and dust of scattering to settle into the ground creating a pleasant environment.
Perfect airtight structure.
Low noise, low vibration, creating a pleasant environment.
Coating processing exterior are gorgeous and strong corrosion
Temperature upswing is less by excellent heat dissipation structure and cooling effect.
▲ Application field
Construction site, school, zoo botanical gardens agriculture, house, livestock

17. DIMENSIONS

18. MIST - Application example

19. Application example

20. Application example

21. Large water injector (MIST)
▲ Features As the only mobile national more than 40 large water jet nozzles and sprayed with high-pressure pump around 25 micron Particles such as fog and water spray. Remote injection by lowering the ambient temperature is more than 3 ℃ relieve the heat. Complete sealed structure. Create a comfortable environment with low noise vibration. Powder coated finish and corrosion-resistant with gorgeous appearance. Excellent heat dissipation and the cooling effect of the structure to a temperature rise less. ▲ Application Construction site, heavy equipment manufacturing, agricultural, axes etc. .. Use

22. INSTALLATION PHOTOS

23. DRAWING

24. GEARED MOTOR 1/4 HP

25. GEARED MOTOR 1/2 HP

26. GEARED MOTOR 1/2 HP

27. GEARED MOTOR 1/2 HP

28. GEARED MOTOR 1/2 HP