1. Microscope Close-Out Photos

2. Loaded Stowage Block and Compartments
Launch Configuration

3. Sealed Stowage Block

4. Empty Stowage Block, Inside

5. Empty Stowage Block, Outside

6. Stowage Block, Left Side (Compartments A and B)
Compartment A
Empty
Compartment B
Contains: (Not Pictured)
Contingency Clean-Up Kit (x2)
Dust Cover (x2)
Stowage Block, Left Side (Compartments A and B)

7. Stowage Block, Compartment A
Empty, Netting folded to allow stage to fit
Stowage Block, Compartment A

8. Stowage Block, Compartment B
Dust Cover (x2)
Contingency Clean-Up Kit (x2)
Stowage Block, Compartment B

9. Stowage Block, Right Side (Compartments C and D)
Compartment C
Contains:
Glove Bags (x4)
Stage (x1)
Compartment D
Contains:
Microscope Support Kit (x1)
Microscope (Bagged)
Stowage Block, Right Side (Compartments C and D)

10. Stowage Block, Compartment C
Stage (x1)
Glove Bag (x4)
The protruding half of the Stage goes into compartment A.
Stowage Block, Compartment C

11. Stowage Block, Compartment D
Microscope Support Kit (x1)
Stowage Block, Compartment D

12. Payload Components
Launch Configuration

13. Microscope, Left Side

14. Microscope, Right Side

15. Microscope Labels, Main Microscope Label

16. Microscope Labels, Power Switch

17. Microscope Labels, Light Brightness Knob

18. Microscope Labels, Photo/Binocular Switch

19. Microscope Labels, Focus Knob

20. Microscope Labels, Objective Turret

21. Microscope Labels, Shield

22. Microscope Labels, Aperture

23. Microscope Labels, Plugs and Jacks

24. Contingency Clean-Up Kit, Stowed in Compartment B
Contingency Clean-Up Kit (x2)
P/N: FIX-A162-1
S/N: 1, Barcode: J
S/N: 2, Barcode: J
Contents:
Large Nitrile Glove (1 pair)
Medium Nitrile Glove (1 pair)
Absorbant Pad, 4” x 3”, Pigmat (x8)
Absorbant Pad, 6” x 4” (x5)
Biocide Wipe (x3)
Double-Walled, Zipper Bag (x2)
Contingency Clean-Up Kit, Stowed in Compartment B

25. Dust Cover, Stowed in Compartment B
Dust Cover (x2)
P/N: BST-A601-1
S/N: 1, Barcode: J
S/N: 2, Barcode: J
Notes: The dust cover can be placed over the microscope and velcro-ed to the base of the microscope. Each dust cover is folded and placed inside a bitran zipper bag as shown on the next slide.
Dust Cover, Stowed in Compartment B

26. Dust Cover, Stowed in Compartment B
Dust Cover (x2)
P/N: BST-A601-1
S/N: 1, Barcode: J
S/N: 2, Barcode: J
Dust Cover, Stowed in Compartment B

27. Stage, Stowed in Compartment C
Stage (x1)
P/N: BST-A604-1
S/N: N/A, Barcode: J
Notes: A scale on top of the stage marks every quarter inch from the right surface.
Stage, Stowed in Compartment C

28. Glove Bag, Stowed in Compartment C
Glove Bag (x4)
P/N: AAN-A613
S/N: 1, Barcode: N/A
S/N: 2, Barcode: N/A
S/N: 3, Barcode: N/A
S/N: 4, Barcode: N/A
Notes: Each Glove Bag is placed in a bitran zipper bag The glove bags are folded and secured with a piece of kapton tape with pull tab. The folding is shown in the photos below.
Glove Bag, Stowed in Compartment C

29. Microscope Support Kit, Stowed in Compartment D
Microscope Support Kit (x1)
P/N: BST-A605-1
S/N: 1, Barcode: J
Contents:
Binocular Eyepiece (x2)
C-Mount (x1)
C-Mount Cap (x1)
Phase Slider (x1)
Velcro Kit (x1)
Microscope Support Kit, Stowed in Compartment D

30. Microscope Support Kit Contents, Binocular Eyepiece
Binocular Eyepiece (x2)
P/N: BST-634-1
S/N: N/A, Barcode: N/A
Notes: Each binocular eyepiece is placed inside a sealed zipper bag for initial glass inspection. This bagged eyepiece is placed inside a bubble bag for padding.
Microscope Support Kit Contents, Binocular Eyepiece

31. Microscope Support Kit Contents, C-Mount & C-Mount Cap
C-Mount (x1)
P/N: BST-632-1
S/N: N/A, Barcode: N/A
Notes: The C-Mount Cap is screwed onto the C-Mount. This assembly is placed inside a bubble bag for padding.
C-Mount Cap (x1)
P/N: BST-A610-1
S/N: N/A, Barcode: N/A
Microscope Support Kit Contents, C-Mount & C-Mount Cap

32. Microscope Support Kit Contents, Phase Slider
Phase Slider (x1)
P/N: BST-633-1
S/N: N/A, Barcode: N/A
Notes: The phase slider is placed inside a bubble bag for padding. One side of the phase slider is labeled and the opposite side has hook velcro on it.
Microscope Support Kit Contents, Phase Slider

33. Microscope Support Kit Contents, Velcro Kit
Velcro Kit (x1)
P/N: N/A
S/N: N/A, Barcode: N/A
Notes: The velcro kit contains 12 patches which can be used to place the microscope on a flat surface.
Each patch consists of a loop velcro square that is adhered to a piece of kapton tape with a small pull tab. A clear piece of backing paper is adhered to the kapton tape which is to be removed before placement of the patch.
Microscope Support Kit Contents, Velcro Kit