1. OM INSTITUTE OF TECHNOLOGY,VANTVACHHODA
SUB- M.S.M
( )
CRYSTALLINE MATERIALS
-Prepared by
PARIKH MANTHAN ASHOKBHAI( )
PATEL JEEMITKUMAR DILIPBHAI( )
CHAUHAN DHARMPALSINH ( )

2. Energy and Packing • Non dense, random packing
typical neighbor
bond length
bond energy
• Dense, ordered packing
Energy r
typical neighbor
bond length
bond energy
Dense, ordered packed structures tend to have
lower energies.

3. Materials and Packing Si Oxygen Crystalline materials...
• atoms pack in periodic, 3D arrays
• typical of:
-metals
-many ceramics
-some polymers
crystalline SiO2
Adapted from Fig. 3.23(a),
Callister & Rethwisch 8e. Si
Oxygen
Noncrystalline materials...
• atoms have no periodic packing
• occurs for:
-complex structures
-rapid cooling
"Amorphous" = Noncrystalline
noncrystalline SiO2
Adapted from Fig. 3.23(b),
Callister & Rethwisch 8e.

4. Metallic Crystal Structures
How can we stack metal atoms to minimize empty space?
2-dimensions
vs.
Now stack these 2-D layers to make 3-D structures

5. Metallic Crystal Structures
• Tend to be densely packed.
• Reasons for dense packing:
- Typically, only one element is present, so all atomic
radii are the same.
- Metallic bonding is not directional.
- Nearest neighbor distances tend to be small in
order to lower bond energy.
- Electron cloud shields cores from each other
• Have the simplest crystal structures.
We will examine three such structures...

6. Simple Cubic Structure (SC)
• Rare due to low packing density (only Po has this structure)
• Close-packed directions are cube edges.
• Coordination # = 6
(# nearest neighbors)
Click once on image to start animation
(Courtesy P.M. Anderson)

7. Atomic Packing Factor (APF)
Volume of atoms in unit cell*
APF =
Volume of unit cell
*assume hard spheres
• APF for a simple cubic structure = 0.52
Adapted from Fig. 3.24,
Callister & Rethwisch 8e.
close-packed directions a
R=0.5a
contains 8 x 1/8 = 1
atom/unit cell
atom
volume
atoms
unit cell 4 3 p
(0.5a) 1
APF = 3 a
unit cell
volume

8. Body Centered Cubic Structure (BCC)
• Atoms touch each other along cube diagonals.
--Note: All atoms are identical; the center atom is shaded
differently only for ease of viewing.
ex: Cr, W, Fe (), Tantalum, Molybdenum
• Coordination # = 8
Adapted from Fig. 3.2,
Callister & Rethwisch 8e.
Click once on image to start animation
(Courtesy P.M. Anderson)
2 atoms/unit cell: 1 center + 8 corners x 1/8

9. Atomic Packing Factor: BCC
• APF for a body-centered cubic structure = 0.68 a R a 3 a a 2
length = 4R =
Close-packed directions:
3 a
Adapted from
Fig. 3.2(a), Callister & Rethwisch 8e.
APF = 4 3 p (
a/4 ) 2
atoms
unit cell
atom
volume a

10. Face Centered Cubic Structure (FCC)
• Atoms touch each other along face diagonals.
--Note: All atoms are identical; the face-centered atoms are shaded
differently only for ease of viewing.
ex: Al, Cu, Au, Pb, Ni, Pt, Ag
• Coordination # = 12
Adapted from Fig. 3.1, Callister & Rethwisch 8e.
Click once on image to start animation
4 atoms/unit cell: 6 face x 1/2 + 8 corners x 1/8
(Courtesy P.M. Anderson)

11. Atomic Packing Factor: FCC
• APF for a face-centered cubic structure = 0.74 a
2 a
maximum achievable APF
Close-packed directions:
length = 4R =
2 a
Unit cell contains:
6 x 1/2 + 8 x 1/8 =
4 atoms/unit cell
Adapted from
Fig. 3.1(a),
Callister & Rethwisch 8e.
APF = 4 3 p ( 2
a/4 )
atoms
unit cell
atom
volume a

12. FCC Stacking Sequence • ABCABC... Stacking Sequence • 2D Projection
A sites B C
sites A B
sites C A C A A B C
• FCC Unit Cell

13. Hexagonal Close-Packed Structure (HCP)
• ABAB... Stacking Sequence
• 3D Projection
• 2D Projection c a
A sites B
sites
Bottom layer
Middle layer
Top
layer
Adapted from Fig. 3.3(a),
Callister & Rethwisch 8e.
• Coordination # = 12
6 atoms/unit cell
• APF = 0.74
ex: Cd, Mg, Ti, Zn
• c/a = 1.633

14. Theoretical Density, r Density =  = n A  = VC NA
Cell
Unit of
Volume
Total in
Atoms
Mass
Density =  =
VC NA
n A
 =
where n = number of atoms/unit cell
A = atomic weight
VC = Volume of unit cell = a3 for cubic
NA = Avogadro’s number
= x 1023 atoms/mol

15. Theoretical Density, r  = a R Ex: Cr (BCC) A = 52.00 g/mol
R = nm
n = 2 atoms/unit cell
a = 4R/ 3 = nm
Adapted from
Fig. 3.2(a), Callister & Rethwisch 8e.
 = a3
52.00 2
atoms
unit cell
mol g
volume
6.022 x 1023
theoretical
= 7.18 g/cm3
ractual
= 7.19 g/cm3

16. Densities of Material Classes
In general
Graphite/ r
metals r
ceramics r
polymers
Metals/
Composites/
>
>
Ceramics/
Polymers
Alloys
fibers
Semicond 30
Why? B
ased on data in Table B1, Callister
Metals have...
• close-packing
(metallic bonding)
• often large atomic masses 2
Magnesium
Aluminum
Steels
Titanium
Cu,Ni
Tin, Zinc
Silver, Mo
Tantalum
Gold, W
Platinum
*GFRE, CFRE, & AFRE are Glass,
Carbon, & Aramid Fiber-Reinforced
Epoxy composites (values based on
60% volume fraction of aligned fibers 10
in an epoxy matrix). G
raphite
Silicon
Glass -
soda
Concrete
Si nitride
Diamond
Al oxide
Zirconia
Ceramics have...
• less dense packing
• often lighter elements 5 3 4
(g/cm ) 3
Wood
AFRE *
CFRE
GFRE*
Glass fibers
Carbon
fibers A
ramid fibers H
DPE, PS
PP, LDPE PC
PTFE
PET
PVC
Silicone
Polymers have...
• low packing density
(often amorphous)
• lighter elements (C,H,O) r 2 1
Composites have...
• intermediate values
0.5
0.4
0.3
Data from Table B.1, Callister & Rethwisch, 8e.

17. Crystals as Building Blocks
• Some engineering applications require single crystals:
-- diamond single
crystals for abrasives
-- turbine blades
Fig. 8.33(c), Callister & Rethwisch 8e. (Fig. 8.33(c) courtesy of Pratt and Whitney).
(Courtesy Martin Deakins,
GE Superabrasives, Worthington, OH. Used with permission.)
• Properties of crystalline materials
often related to crystal structure.
-- Ex: Quartz fractures more easily along some crystal planes than others.
(Courtesy P.M. Anderson)

18. Polycrystals Anisotropic
• Most engineering materials are polycrystals.
Adapted from Fig. K, color inset pages of Callister 5e.
(Fig. K is courtesy of Paul E. Danielson, Teledyne Wah Chang Albany)
1 mm
Isotropic
• Nb-Hf-W plate with an electron beam weld.
• Each "grain" is a single crystal.
• If grains are randomly oriented,
overall component properties are not directional.
• Grain sizes typically range from 1 nm to 2 cm
(i.e., from a few to millions of atomic layers).

19. Single vs Polycrystals
E (diagonal) = 273 GPa
E (edge) = 125 GPa
• Single Crystals
-Properties vary with
direction: anisotropic.
Data from Table 3.3, Callister & Rethwisch 8e. (Source of data is R.W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, 3rd ed., John Wiley and Sons, 1989.)
-Example: the modulus
of elasticity (E) in BCC iron:
• Polycrystals
-Properties may/may not
vary with direction.
-If grains are randomly
oriented: isotropic.
(Epoly iron = 210 GPa)
-If grains are textured,
anisotropic.
200 mm
Adapted from Fig. 4.14(b), Callister & Rethwisch 8e.
(Fig. 4.14(b) is courtesy of L.C. Smith and C. Brady, the National Bureau of Standards, Washington, DC [now the National Institute of Standards and Technology, Gaithersburg, MD].)

20. Polymorphism
Two or more distinct crystal structures for the same material (allotropy/polymorphism)     titanium
  , -Ti
carbon
diamond, graphite
BCC
FCC
1538ºC
1394ºC
912ºC
-Fe
-Fe
-Fe
liquid
iron system

21. Crystal Systems
Unit cell: smallest repetitive volume which contains the complete lattice pattern of a crystal.
Fig. 3.4, Callister & Rethwisch 8e.
7 crystal systems
14 crystal lattices
a, b, and c are the lattice constants

22. Point Coordinates z Point coordinates for unit cell center are cx y a b c
000
111
Point coordinates for unit cell center are
a/2, b/2, c/ ½ ½ ½
Point coordinates for unit cell corner are 111
Translation: integer multiple of lattice constants  identical position in another unit cell z 2c y b b

23. Crystallographic Directionsz
pt. 2 head
Example 2: pt. 1 x1 = a, y1 = b/2, z1 = 0 pt. 2 x2 = -a, y2 = b, z2 = c y
pt. 1: tail x
=> -2, 1/2, 1
Multiplying by 2 to eliminate the fraction
-4, 1, 2
where the overbar represents a negative index
[ 412 ]
=>
families of directions <uvw>

24. Crystallographic Directionsz
Algorithm
1. Vector repositioned (if necessary) to pass
through origin. 2. Read off projections in terms of unit cell dimensions a, b, and c 3. Adjust to smallest integer values 4. Enclose in square brackets, no commas
[uvw] y x
ex: 1, 0, ½
Lecture 2 ended here
=> 2, 0, 1
=> [ 201 ]
-1, 1, 1
where overbar represents a negative index
[ 111 ]
=>
families of directions <uvw>

25. Linear Density 3.5 nm a 2 LD = Linear Density of Atoms  LD = [110]
Number of atoms
Unit length of direction vector a
[110]
ex: linear density of Al in [110] direction  a = nm
# atoms
length 1
3.5 nm a 2 LD - =
Adapted from
Fig. 3.1(a),
Callister & Rethwisch 8e.

26. HCP Crystallographic Directions- a3 a1 a2 z
Algorithm
1. Vector repositioned (if necessary) to pass
through origin. 2. Read off projections in terms of unit
cell dimensions a1, a2, a3, or c 3. Adjust to smallest integer values 4. Enclose in square brackets, no commas
[uvtw]
dashed red lines indicate
projections onto a1 and a2 axes a1 a2 a3
-a3 2 a 1
Adapted from Fig. 3.8(a), Callister & Rethwisch 8e.
[ 1120 ]
ex: ½, ½, -1, =>

27. HCP Crystallographic Directions
Hexagonal Crystals
4 parameter Miller-Bravais lattice coordinates are related to the direction indices (i.e., u'v'w') as follows.
Fig. 3.8(a), Callister & Rethwisch 8e. - a3 a1 a2 z = ' w t v u ) ( + - 2 3 1 ]
uvtw [

28. Crystallographic Planes
Adapted from Fig. 3.10, Callister & Rethwisch 8e.

29. Crystallographic Planes
Miller Indices: Reciprocals of the (three) axial intercepts for a plane, cleared of fractions & common multiples. All parallel planes have same Miller indices.
Algorithm 
1.  Read off intercepts of plane with axes in
terms of a, b, c
2. Take reciprocals of intercepts
3. Reduce to smallest integer values
4. Enclose in parentheses, no
commas i.e., (hkl)

30. Crystallographic Planesz x y a b c
example
a b c
Intercepts 
Reciprocals
1/ / /
Reduction
Miller Indices (110)
example
a b c z x y a b c
Intercepts
1/  
Reciprocals
1/½ 1/ 1/
Reduction
Miller Indices (100)

31. Crystallographic Planesz x y a b c
example
a b c
Intercepts
1/ /4
Reciprocals
1/½ 1/ /¾ /3
Reduction
Miller Indices (634)
(001)
(010),
Family of Planes {hkl}
(100),
(001),
Ex: {100} = (100),

32. Crystallographic Planes (HCP)
In hexagonal unit cells the same idea is used a2 a3 a1 z
example
a a a c
Intercepts  -1 1
Reciprocals / -1 1
Reduction -1 1
Miller-Bravais Indices
(1011)
Adapted from Fig. 3.8(b), Callister & Rethwisch 8e.

33. Crystallographic Planes
We want to examine the atomic packing of crystallographic planes
Iron foil can be used as a catalyst. The atomic packing of the exposed planes is important.
Draw (100) and (111) crystallographic planes
for Fe.
b) Calculate the planar density for each of these planes.

34. Virtual Materials Science & Engineering (VMSE)
• VMSE is a tool to visualize materials science topics such as
crystallography and polymer structures in three dimensions
• Available in Student Companion Site at
and in WileyPLUS

35. VMSE: Metallic Crystal Structures & Crystallography Module
• VMSE allows you to view crystal structures, directions, planes, etc. and manipulate them in three dimensions

36. Unit Cells for Metals FCC Structure HCP Structure
• VMSE allows you to view the unit cells and manipulate
them in three dimensions
• Below are examples of actual VMSE screen shots
FCC Structure
HCP Structure

37. VMSE: Crystallographic Planes Exercises
Additional practice on indexing crystallographic planes

38. Planar Density of (100) Iron
Solution:  At T < 912ºC iron has the BCC structure.
2D repeat unit R 3 4 a =
(100)
Radius of iron R = nm
Adapted from Fig. 3.2(c), Callister & Rethwisch 8e. =
Planar Density = a 2 1
atoms
2D repeat unit
nm2
12.1 m2
= 1.2 x 1019 R 3 4
area

39. Planar Density of (111) Iron
Solution (cont):  (111) plane
1 atom in plane/ unit surface cell 2 a
atoms in plane
atoms above plane
atoms below plane
2D repeat unit 3 h = a 2 3 2 R 16 4 a ah
area =  ø ö ç è æ 1 =
nm2
atoms
7.0 m2
0.70 x 1019 3 2 R 16
Planar Density =
2D repeat unit
area

40. VMSE Planar Atomic Arrangements
• VMSE allows you to view planar arrangements and rotate
them in 3 dimensions
BCC (110) Plane

41. X-Ray Diffraction
Diffraction gratings must have spacings comparable to the wavelength of diffracted radiation.
Can’t resolve spacings  
Spacing is the distance between parallel planes of atoms.  

42. X-Rays to Determine Crystal Structure
• Incoming X-rays diffract from crystal planes.
Adapted from Fig. 3.20, Callister & Rethwisch 8e.
reflections must
be in phase for
a detectable signal
spacing
between
planes d
incoming
X-rays
outgoing X-rays
detector q l
extra
distance
travelled
by wave “2”
“1”
“2”
X-ray
intensity
(from
detector) q c
d =
n l
2 sin
Measurement of critical angle, qc, allows computation of planar spacing, d.

43. X-Ray Diffraction Patternz x y a b c z x y a b c z x y a b c
(110)
(211)
Intensity (relative)
(200)
Diffraction angle 2q
Diffraction pattern for polycrystalline a-iron (BCC)
Adapted from Fig. 3.22, Callister 8e.