1. PNEUMATIC MAINTENANCE
TOOLS
PNEUMATIC MAINTENANCE
AIR FILTER
The air that is operated in pneumatic must be clean and isn’t contain water. Bad air will fasten the worn down of silinder, piston seal, and valve. Meanwhile air that contains water will cause the valves leak fast, because the water can fasten the valve dirtiness. That’s why air filter is needed and must be cleaned from dirt and water periodically.
Teknologi dan Rekayasa

2. PNEUMATIC MAINTENANCE
TOOLS
PNEUMATIC MAINTENANCE
AIR VALVE
If thevalve leaks, the first we must clean the steel ball that is as the valve. If after we claen it and it still leaks, we must replace with the new one. That’s why complete valve unit is needed as spare part in some amounts.
Teknologi dan Rekayasa

3. PNEUMATIC MAINTENANCE
TOOLS
PNEUMATIC MAINTENANCE
PRESSURE REGULATOR
Pressure Regulator is a component that regulates wanted work pressure. Damage usually happens on diaphragm because of exhaustion on going up and down. The damage is hard to be fixed, that’s why it isoleh karena itu perlu men needed to provide reserve component. See the picture.
Teknologi dan Rekayasa

4. PNEUMATIC MAINTENANCE
TOOLS
PNEUMATIC MAINTENANCE
CYLINDER ACTUATOR
Silinder and piston can work well if they are completed with seal an bearing. Thedamage is usually because of the worn out-seal, so the seal needs to smear using special lubricant to reduce friction.
Teknologi dan Rekayasa

5. PNEUMATIC MAINTENANCE
TOOLS
PNEUMATIC MAINTENANCE
SEAL
Last seal and eraser seal are made from syntetic rubber or puliuretan, in order that they are not easy to be worn out , the trunk and axis must be lubricated using lubricant. The worn-out on seal causes leaking and it needs spare part.
Teknologi dan Rekayasa

6. PNEUMATIC MAINTENANCE
TOOLS
PNEUMATIC MAINTENANCE
PISTON PNEUMATIC
It shows cup seal used on piston, this seal is worn out faster than the seal used as the closer in the axis. In orde to be long life, the air filled into the cylinder must be clean, the cylinder must be lubricated to reduce the friction between the cylinder surface and the seal. This spare part such this cup seal must be available in some amounts for certain time.
Teknologi dan Rekayasa

7. PNEUMATIC MAINTENANCE
TOOLS
PNEUMATIC MAINTENANCE
RING SEAL
Piston also uses ring seal or O in some amounts as the closers. Generally, ring seal is made from syntetic rubber and lubricant proof. It is needed to provide some in the same size. The fastest-worn out seal is seal that is used on piston. So, some reserve seals are needed.
back
Teknologi dan Rekayasa