1. Do Now

2. Error & Uncertainty Propagation & Reporting Absolute Error or Uncertainty is the total uncertainty in a measurement reported as a ± with the measurement.

3. Three styles for expressing uncertainties:
Absolute uncertainty. V ± ΔV = (13.8 ± 0.2) mL V falls within 13.6 – 14.0 mL Fractional or Relative ΔV / V = 0.2 / 13.8 ≈ Compares Abs. to actual measure. Percentage ΔV % = (ΔV / V) × 100 = (0.2 / 13.8) × 100 ≈ 1.4 %

4. Absolute Uncertainty show a range
0.1 kg
4.5 kg
Absolute Uncertainty or Error
This says the actual value lies between 4.4 – 4.6 kg.
The absolute error should be 1 SF only. Its place must agree with the measurement’s place.
ST called raw unc.

5. Where absolute error come from? How do you know the correct range?
Measure the diameter of a ball with the ruler. Report your measurement.

6. At minimum it’s the instrument uncertainty.
Usu instrument uncertainty plus other uncertainty sources. Use your judgment but be logical.
Ball radius in drop height.
Meniscus in graduated cylinder.

7. Instrument Uncertainty
For scales where you can read between 2 divisions, you can report ½ the smallest or the actual smallest measure as your instrument uncertainty (I generally use the smallest increment).
For digital measures
just report the smallest unit.

8. Absolute Uncertainty of Mean
Unc. Shrinks w more trials.
Generally experiment requires a 5 x 5 table. Five trials, Five different values for independent variable.
Take five different drop heights, 5 trials each. Measure the time to hit the ground. Average times.
For set of measurements, absolute uncert:
(Max – Min) / 2

9. 1: Given Ball drop experiment with set of drop times in seconds for 1 height:
0.23
0.22
0.26
0.34
0.18
Find the mean and the absolute uncertainty of the mean.
Proper value =
0.25 ± 0.08 s
mean = s
unc. is
(0.34 – 0.18)/2
0.08

10. Ways of reporting uncertainty
Absolute uncertainty is a range.
Fractional / Relative uncertainty
% uncertainty/error
% difference/discrepancy

11. 2. For the measure find relative and % uncertainty 0.1 kg 4.5 kg
Relative/fractional Uncertainty or Error gives idea of what fraction of the measure the uncertainty represents. It is calculated as:
Absolute Uncertainty
Measurement
2. For the measure find relative and % uncertainty
0.1 kg
4.5 kg
0.022 or 2.2%
Relative Error/Uncert.
This does not get a ± . It can be more than 1 SF.

12. % Uncertainty/Error is different than % difference, deviation, discrepancy.
% Dif measures difference from accepted value: Accept val – meas val x 100% Accepted Val
% Error - amount of uncertainty in measurement.

13. Propagation of Error
Measure height of counter in cm with a meter-stick.
Measure height of student with meter-stick.
Which has more uncertainty?
If you do calculations with the measurements with uncertainties – the uncertainty will increase.

14. Adding or subtracting measurements, the total absolute error is the sum of the absolute errors!
Data booklet reference:
• If y = a  b then y = a + b
2.61
0.05 cm
5.6
0.1 cm
2.82
0.05 cm
2.1
0.1 cm + -
5.4
0.1 cm
3.5
0.2 cm
Decimal Agreement

15. Multiplication & Division
1st – solve it! Find product or quotient normal way.
Must calculate relative or percent uncertainty for each individual measure.
Then add the relative/percent errors.
If y = a · b / c then y / y = a / a + b / b + c / c
Absolute Error is reported as fraction of the answer.

16. 3. Find the area of a rectangle measuring:
2.6 cm ±0.5 by 2.8 ±0.5 cm?
Solve
A = l x w:
7.28 cm2.

17. If y = a · b / c then y / y = a / a + b / b + c / c
Find the relative/percent error of each measurement:
0.5 ÷ 2.6 = 0.192
0.5 ÷ 2.8 = 0.179
Sum the relative errors:
= or 37%
If y = a · b / c then y / y = a / a + b / b + c / c
Abs Unc. multiply relative unc. by the answer.
0.371 x 7.28 cm2 = 2.70 cm2.
This is the ± giving the range on your measurement.
It means 7.28 ± 2.70cm2.

18. Answer gets rounded to the same place as ± .
Round uncertainty (not meas) 1 SF &report
2.70 cm2 becomes ± 3 cm2.
Answer gets rounded to the same place as ± .
7.28 cm2 = becomes 7 cm2 to agree with 3 cm2.
Report: 7 cm2 ± 3 cm2.

19. Add the sides 32.0 m = perimeter.
4. Find the perimeter and absolute uncertainty of a rectangular floor measuring 10.0 ± 0.3 m by 6.0 ± 0.2 m.
10.0 ± 0.3 m
10.0 ± 0.3 m
Add the sides 32.0 m = perimeter.
Add the abs uncert = ±1.0 m.
32.0 m ±1.0 m.
Round to abs uncert to 1 SF 32 ± 1 m.

20. Raising measurements to power n
Solve equation
Find relative uncertainty.
Multiply relative uncertainty by n (power).
• If y = a n then y / y = | n · a / a |

21. 5: find volume of cube with side length of 2.5 0.1 cm.
Volume = (2.5 cm)3 = cm3.
Relative uncertainty for each side =
0.1 cm = 0.04
2.5 cm

22. Round to uncertainty to 1 sig fig ± 2 cm3.
0.04 x 3 (nth power) = This is the fraction of uncertainty in the volume measure.
0.12 ( cm3.) = cm3.
Round to uncertainty to 1 sig fig ± 2 cm3.

23. Finish
Round last digit of answer to same place as abs uncertainty. Uncertainty to 1 SF was 2cm3 (one’s place).
Ans was cm3.
So cm3 ± 2cm3.

24. 6. A protractor is precise to ±1o
6. A protractor is precise to ±1o. A student obtains the following measurements for a refraction angle: 45, 47, 46, 45, and 44 degrees. How show he express the refractive angle with its uncertainty?
Mean = 45.4o.
Max – Min = 47 – 44 = 3o.
Half range = 1.5o.
With rounding:
Value = 45 ± 2o.

25. Uncertainty Tutorial https://www.youtube.com/watch?v=0lt-9qimLf4

26. Exact/ pure numbers
There are no uncertainties associated with pure numbers, the type of operation determines the uncertainty propagation where, for example:
If a quantity is divided by 2, the uncertainty in the 2 is zero.
If you multiply a quantity by π, the uncertainty in π is zero.
The only uncertainty in πr2 is in the measurement of r, where r is ± Δr.
For multiplication by an exact number, multiply the uncertainty by the same exact number. For division, divide uncert by number.

27. Uncertainty in Series of Measurements
Take the average value and determine the uncertainty from the range. The range is the difference between the largest and smallest measurements. The uncertainty is ± one half the range. Given 4 measurements:
x1 = 32, x2 = 36, x3 = 33, x4 = 37
mean of x = (x1 + x2 + x3 + x4) / 4 = 35.5 (Average)
Abs uncert , Δx = ±(xmax – xmin) / 2 = (37 – 32) / 2 = 2.5
mean of x ± Δx = ±  2.5 ≈ 36 ± 3.

28. Reciprocals, logarithms, & trigonometric functions
Reciprocals, logarithms, & trigonometric functions. Uncertainties are not usually symmetrical.
Make minimum and maximum calculations for the uncertainty range then round to a positive or negative symmetrical value.
θ ± Δθ = (13 ± 1)°
sin13° =
sin14° = sin12° =
sin(13 ± 1)° = ( and – )
sin(13 ± 1)° = 0.22 ± 0.02