Presentation is loading. Please wait.

Presentation is loading. Please wait.

Wavelength Plan Proposal - Intermediate Report -

Similar presentations


Presentation on theme: "Wavelength Plan Proposal - Intermediate Report -"— Presentation transcript:

1 Wavelength Plan Proposal - Intermediate Report -
ver. 1.1

2 Report at March meeting
Conclusion in March meeting presentation By reviewing the proposals in IEEE meetings and systematically narrowing the 10GE-PON system configuration achieving coexistence with current systems, we found that - US : TDM-based overlay is preferable - DS : WDM-based overly using L-band is the only solution. Wavelength allocation WDM filter problem of US/DS separation Candidate for 10GE-PON : L-band GE-PON (US) GE-PON (DS) Video OTDR SMF cut-off problem 1.21 1.26 1.31 1.36 1.41 1.46 1.51 1.56 1.61 1.66 l Additional filters may be required to 1G-ONU and V-ONU. Action Item Wavelength Plan Proposal

3 Configuration of optical filters in ONUs (1)
Several types of optical filter configuration in ONUs are considered for coexistence. In general, they are commonly categorized into: (Case-1) combination of several WDM filters, as shown in 3av_0703_hajduczenia_2.pdf, (Case-2) combination of WDM filters and optical band-pass filters. (Case-1) (Case-2) SWPF1 SWPF2 SWPF LD LD LWPF BPF 1260~1360 1G/10G Up 1480~1500 1G Down 1550~1560 Video PD 1574~ G Down PD 1625~1650 OTDR Filter name Pass l band [nm] Min. guard band [nm] Filter angle [deg] SWPF1 -1360 120 45 SWPF2 -1580 LWPF 1574- 14 Filter name Pass l band [nm] Min. guard band Filter angle [deg] SWPF -1360 120 45 BPF 14

4 Configuration of optical filters in ONUs (2)
(Case-1) (Case-2) Receiver side Receiver side Pass band Pass band 10G-PON (DS) 10G-PON (DS) 1G&10G-PON (US) GE-PON (DS) Video 1G&10G-PON (US) GE-PON (DS) Video SWPF-1 BPF LWPF-1 1.26 1.36 1.48 1.50 1.55 1.56 l 1.26 1.36 1.48 1.50 1.55 1.56 l SWPF-1 SWPF-1 Transmitter side Transmitter side Pass band Pass band SWPF-1 SWPF-1 10G-PON (DS) 10G-PON (DS) 1G&10G-PON (US) GE-PON (DS) Video 1G&10G-PON (US) GE-PON (DS) Video SWPF-1 1.26 1.36 1.48 1.50 1.55 1.56 l 1.26 1.36 1.48 1.50 1.55 1.56 l The cost of the ONU is mainly dominated by the optical transceiver components. The insertion loss should be a decisive factor when designing optical filters to relax the optical transceiver specifications. From this perspective, the feasibility of the case-2 filter was considered – a smaller number of filters is preferable in terms of lower insertion loss.

5 What is the required guard band size ?
BPF specification (1) In studying the feasibility of the case2-type ONU blocking filters, we assumed the following conditions: (a) No additional filter to already deployed 1G-ONU and V-ONU, (b) Insertion loss : < 1 dB, (c) nm : > 35 dB, (d) No restriction on the module type, (e) ONU embedded filter (preferable). Isolation: 35 dB Signal band: Video 10G-PON (DS) l 1550 1560 What is the required guard band size ? System vendors investigated the required guard band for blocking video signal.

6 BPF specification (2) Shortest wavelength of 10G DS band and required guard band Study results on the required guard band (GB) from system vendors; 35 dB-Isolation and 40 nm-GB would be necessary for PLC-type module. 15~20 nm-GB would be feasible for BIDI-type module. (There is a report that 5 nm-GB would be theoretically feasible.) For BOSA-type module, the insertion loss would be less than 1 dB when the signal wavelength is assigned between 1574 and 1580nm. 20 nm-GB is now available for TO-CAN module. It is considered that 16 nm-GB for 1574 nm channel is feasible. Longest wavelength of 10G DS band The longest wavelength is referred to ITU-T recommendations such as G.982 and G.983, in which the signal wavelength range shall be less than 1580 nm. Isolation: 35dB Signal band : 6 nm Video 10G-PON (DS) l 1550 1560 1574 1580 Guard band: 16 nm

7 Summary Configuration of optical filters in ONUs : WDM filter + BPF
10G-PON (DS) 1G&10G-PON (US) GE-PON (DS) Video Band-pass filter for extracting only downstream signal 1.26 1.36 1.48 1.50 1.55 1.56 l WDM filter for splitting and combining up- and downstream signals Wavelength allocation and BPF specification The shortest wavelength is bound by the characteristics of the optical BFP. The longest wavelength is bound by conventional ITU-T recommendations such as G.982 and 983, in which the signal wavelength range shall not exceed 1580 nm. Isolation: 35 dB Signal band: 6 nm Video 10G-PON (DS) 1550 1560 1574 1580 l Guard band: 16 nm


Download ppt "Wavelength Plan Proposal - Intermediate Report -"

Similar presentations


Ads by Google