1. Date of download: 10/26/2017
Copyright © ASME. All rights reserved.
From: Ultrasonic Bonding of Membrane Electrode Assemblies for Low Temperature Proton Exchange Membrane Fuel Cells
J. Fuel Cell Sci. Technol. 2012;9(5): doi: /
Figure Legend:
(a) Schematic of standard 5-layer MEA architecture and (b) dimensioned (cm) drawing of low temperature MEA

2. Date of download: 10/26/2017
Copyright © ASME. All rights reserved.
From: Ultrasonic Bonding of Membrane Electrode Assemblies for Low Temperature Proton Exchange Membrane Fuel Cells
J. Fuel Cell Sci. Technol. 2012;9(5): doi: /
Figure Legend:
Schematic of labeled MEA made by hand in ultrasonic setup prior to bonding

3. Date of download: 10/26/2017
Copyright © ASME. All rights reserved.
From: Ultrasonic Bonding of Membrane Electrode Assemblies for Low Temperature Proton Exchange Membrane Fuel Cells
J. Fuel Cell Sci. Technol. 2012;9(5): doi: /
Figure Legend:
Cell testing hardware

4. Date of download: 10/26/2017
Copyright © ASME. All rights reserved.
From: Ultrasonic Bonding of Membrane Electrode Assemblies for Low Temperature Proton Exchange Membrane Fuel Cells
J. Fuel Cell Sci. Technol. 2012;9(5): doi: /
Figure Legend:
Effect of electrode loading and architecture on ultrasonically bonded MEAs

5. Date of download: 10/26/2017
Copyright © ASME. All rights reserved.
From: Ultrasonic Bonding of Membrane Electrode Assemblies for Low Temperature Proton Exchange Membrane Fuel Cells
J. Fuel Cell Sci. Technol. 2012;9(5): doi: /
Figure Legend:
Effect of electrode loading and architecture on thermally bonded MEAs