1. GEOMETRY CREATION METHODOLOGIES FOR LHC POINT 4
GEORGIAN TECHNICAL UNIVERSITY
GEOMETRY CREATION METHODOLOGIES FOR LHC POINT 4
DAVIT SHEKILADZE
Responsible Chair: Mr. Alexander SHARMAZANASHVILI
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH, CERN
03/10/2016

2. LHC
03/10/2016

3. Point 4
Location and geometry of Point 4
03/10/2016

4. The first phase
Wrong geometry of Point 4
03/10/2016

5. Displacement
The location of geometry
03/10/2016

6. Displacement
In sketch the circle and the line were far away from each other
03/10/2016

7. Point Distance
The location of geometry
03/10/2016

8. Point Distance Two points of interlacement were far away on axis X
03/10/2016

9. Sketch length problem
The location of geometry
03/10/2016

10. Sketch length problem The length of sketch was statutoried in details10
03/10/2016

11. Wrong Circle
The location of geometry
03/10/2016

12. Wrong Circle
Turning place radius was smaller than opening circle radius
03/10/2016

13. Pipes And Kleystron
03/10/2016

14. The Third phase
Scan model of Point 4
03/10/2016

15. Miles We have found unbuilt 11 pipes 03/10/2016
UX LEP-05 D   
UX LEP-06 D
UX LEP-01 D  
UX LEP-07 D  
UX LAP-02 D
UX LAP-08 D
UX LAP-03 D  
UX LEP-09 L
UX LAP-04 D
We have found unbuilt 11 pipes
03/10/2016

16. Different The error between geometry and scanned models 02/10/2015
Nec’2015, Montenegro

17. Different between scanned models and pictures
UX LAP-08 D
ø260
ø160
2065mm
ø114
34100mm
430mm
ø114
3335mm
70mm
ø80
320mm
30mm
ø230
ø160
Different between scanned models and pictures
03/10/2016

18. Thank you for your attention
03/10/2016