1. From: Condensation on Superhydrophobic Copper Oxide Nanostructures
Date of download: 10/27/2017
Copyright © ASME. All rights reserved.
From: Condensation on Superhydrophobic Copper Oxide Nanostructures
J. Heat Transfer. 2013;135(9): doi: /
Figure Legend:
Schematic of the optical microscopy experimental set-up. Dry N2 was supplied from a cylinder with the flow rate measured using a rotometer. A three-way valve was used to route the N2 supply either directly to the enclosure or through a temperature-controlled water reservoir via a sparging head and then to the enclosure. The enclosure humidity was monitored using a humidity probe located ≈1 cm from the mounted sample. Images were captured at either 40× or 100× magnification using a CMOS camera mounted to an upright microscope.