1. New developments and inventory
Salvatore Danzeca

2. What we know now
QPS:
600A systems – production finished – final qualification and deployment pending (CHARM test?)
Splice protection DQQBS – Firmware upgrade
Quadrupole QPS renovation – LS2 – use of components already known: ProASIC3, ADC
IPQ/IPD (fire the heaters) modifications required but only few components (passive)

3. What we know – Part 2 CRYO:
Possible modification on the Heaters/ Level Transducers and Temperature cards
Commercial equivalent of the Antifuse (too expensive)
LT logic to be changed and maybe an OpAmp is needed.
Igloo2 will be an option and if the tests are successful
The cards will be modified only for other experience and if it works well then could be deployed in the LHC
Possible test in CHARM next year (2016) on a new developed card to verify the working function

4. What we know – Part 3 BI
SPS Multi Orbit POsition System (MOPOS) Jose Luis Gonzalez
Exposed up to 100 Gy/y
Serial ADC 10MHz : Octal 14-bit ADC: AD9252 to be tested
LogAmps (Tested at PSI) (passed 1kGy)
Optical Link: Versatile Transceiver (VTRx) to be tested
FPGA Xilinx Spartan6 FPGA?? To be tested
Voltage regulators TL1963A TPS7A4501 (passed 1kGy)
CAMERA need and research a RADHARD camera with good sensitivity
Wire Scanner: Beam Secondary Shower Acquisition System Design under study, to follow it (via Jose Luis Sirvent Blasco)
GEFE Manoel Barros Marin
Project started
First two prototype in assembly
All the components tested in other campaign BE TE(do they test their lot?)
They foresee a radiation campaign at System Level (Christophe Donat Godichal )

5. Missing
Vacuum RF
Safety (DG)