1. Explain Basic Tecnical Drawing
Applying the basics of technical drawing Explain the basics of technical drawing
Explain Basic Tecnical Drawing

2. Learning Objectives
students are expected to be made to understand the basics of drawing techniques
Teknologi dan Rekayasa

3. Basic technical drawing is the basis for design and design that will be made. Its function is to facilitate work on the work piece

4. Drawing tools are needed in drawing techniques include: 1
Drawing tools are needed in drawing techniques include: 1. Paper Figure 1) Paper “Padalarang” 2) Paper manila 3) Paper “Strimin” 4) Paper bread 5) Tracing Paper
Teknologi dan Rekayasa

5. Paper size

6. 2. Drawing Pencil
Standard pencil hardness

7. Using pencil

9. Using compas

10. Using Sablon / Mal
Mal Lingkaran
Mal Ellips

11. Mal Arsitek
Teknologi dan Rekayasa

12. Mal Bentuk Lain
Sablon Huruf dan Angka
Teknologi dan Rekayasa

13. How to Use Rapido
In line with rapido draw should be placed on the paper, do not be pressured, then withdrawn with a slope between 60 º - 80 º from left to right. Besides, do not draw a line from the top down. If the road is less smooth ink and appointed rapido rocked horizontally, then try to use again. If not fluently repeated the original motion. If the ink does not come out rapido eyes should be washed or cleaned.
Teknologi dan Rekayasa

14. They way to refill ink
Teknologi dan Rekayasa

15. The way to clean rapido
Teknologi dan Rekayasa

16. Written by : Kuswanto, S.Pd.
Thank you
Written by : Kuswanto, S.Pd.
SMK Negeri 1 Purworejo