2. 1) General information
2) Sales information
3) Technical information

3. GENERAL INFORMATION Sib Sideral produces (since 1977): Turnover:
Broaches Round (75%)
Broaches Flat (15%)
Gauges (5%)
Shaper cutters (5%)
Euro per year (only new products)
Euro of
re-sharpening and adjusting

4. New products in last 10 years:
Shuttle (about 15% of our broaches have it).
Shaper cutters
Gauges
Broaching machine Check point and Check point control
Broaching machine
Check point and Check point control
Stars & stripes

5. All phases of productions are made inside by CNC machines except heat treatment made by a supplier located near Torino
HSS is bought only from Bohler or Erasteel, (M2 45%,
M35 25%, ASP23 10% and ASP30 20%)
Coating is made by a couple of suppliers located in Torino and Milano

6. Investments in the last 10 years:
18 new CNC machines bought or made by ourselves
4 new patents
Completely new project of broaching machine (mech., hydr., elect. and software made in house)
30 employed in 2 shifts with more of 20 CNC machines.

7. SALES INFORMATION Phone +39 011 9980316
Massaro Bruno managing director
sales and technical support ext 3
sales, ROQ, orders and general questions – ext 3
Site:

8. About delivery:
6-8 weeks for standard broaches until 120mm diam. (in special case we can be faster)
9-12 weeks for special broaches
1 week more for coating
Delivery time starts from approval of our DWG by customer

9. Documentations: About prices:
All sheets of our products are in DOWNLOAD area in our site (in this moment our site is update)
In the last 11 years we have not apply any increase in prices (we adjusted increases only for HSS and heat treatment) and we are absolutely competitive with our competitors in Europe.

10. TECHNICAL INFORMATION (for round broaches)
Dimension of broaches:
- From 15mm to 250mm of diameter
- From 600mm to 2.700mm lenght

11. Our standard DWG (A0) for signature

12. A1) lenght to be broached

13. A2) diameter and relative tolerance of pre-bore for broaching A3) tolerance of broached part (internal diam, external diam, pins quote) A4) other request, like chamfer, diam. of start and end profile, etc.

14. A5) ENDS

15. A6) total lenght

16. A7) length to first tooth

17. A8) different types of broaches for finishing internal hole
Rotorcut
Alternating teeth

18. A9) Number of cutting teeth with steps and dept of gullets

19. A10) Shuttle
Shell mounted at the end of tool (also for little diameters) re-broach the profile for obtain tolerances on broached parts up to DIN 7.
It is also e very good solution for adjusting old tools out of tolerance

20. A11) Broaching test on a customer part or on our sample and certification by our ZEISS

21. On the broach order (also for ROQ) (if the broach is new) we need:
DWG of customer’s part (we obtain A1 A2 A3 A4)
Data from customer’s broaching machine (for having A5 A6 A7 and max TONS available)
Request of customer (we need it for A8 A10 A11 and kind of HSS, coating)

22. Thank you for the attention
CHIAVE A STELLA
AWARD
BROACHES
TOOLS