1. HOT CAR BABY DETCTOR Supervisor : Dr. Jamal Kharrosheh PREPARED BY :
Rimaa shehade
Nema Abu Al Kheer
Samah Amodi

2. Out line: Introduction. Objective. Benifets .
Achievements in last semester
Achievements in this semester.
Problems
Solutions
Future work
Conclusion
Recommendation

3. Introduction:
In recent years, there have been a number of accidents where babies are forgotten in a car.
During a hot summer day and in direct sunlight, a car’s interior temperature can reach as high as 65° C. Within minutes, a car can become a hot furnace exposing the child to life threatening conditions.

4. :Our Objective
The goal of this project is to design a reliable device that can accurately detect a child in a hot car.

5. Benefits 
Life saving: by using modern technology and some kinds of alarms.
Reliable:  
*Device utilizes three human sensors, greatly 
increasing the detection rate 
*Send two sms for toe different persons . 

6. Achievement in last semester
In last semester we studied the project deeply and analyses it theoretically .
we bought The suitable equipment for project.
we connected The sensors to each other practically to test it .

7. Achievement in this semester
We continue the program was started in the last semester.
We connected all the sensors together and tested them.
we work on the alarms which contains send 2 sms’s by GSM modem , lighting and sound alarm and open the window .

10. Problems We face some difficult in writing the code .
CO2 sensor : the price is very expensive and not available here .
We have some difficulty in final design of the car to make it suitable for sensors.

11. Solutions
We learn the arduino language to be able to write a suitable code .
We replace CO2 sensor by smoking sensor which approximately give the same result.
We make more types of design until reach final design

12. Final Design

13. :Future work
Add oxygen sensor to see the time remaining for the life of the child and rescue him.
Add push button to prevent the alarm in case it is not needed
connect the device directly with the Civil Defense to increase the possibility to rescue the Children.
So ,It can convert this project with the development to product can be sold in markets

14. Conclusion :
Although the problems we faced ,we able to solve it to achieve our goals and have this final design

15. Recommendation
For the Health of your sons recommend that all parents put this device in their cars.
Turn the system into a commercial product .