1. E-mail: export@ginevri.com
Andrea Ferro
Tel:
Mob:
Skype: andrea.ferro84

2. GIULIA Neonatal Ventilator Spokesmen:
Mr. Andrea Ferro – Export Manager
Mr. Mehdi Hammou – Export Area Manager
26/02/2014

3. STATE OF THE ART
The endotracheal GIULIA is a new ventilator able to support the baby with all the most common ventilation modalities:
CPAP and nasal CPAP (NCPAP)
SIMV and nasal SIMV (NSIMV)
SIPPV and nasal (NSIPPV)
With the endotracheal GIULIA we created a new “State of the Art” on ventilators.

4. IMPROVEMENTS Endotracheal ventilation modalities Smart flow NIV kit
Touch Screen/Encoder
Manual and Automatic alarms
Acoustic Trigger
Number and Type of graphs
O2 Flush
Battery Level

5. VENTILATION MODES

6. SMART FLOW NIV KIT
To better adapt and be comfortable for the patient, and to assure high accuracy in the readings of the vital parameters of the patient, it has developed a specific non-invasive kit to measure the flow and pressures in the airways.
The new design has been studied to obtain the maximum lightness and comfort for the patient
The flow sensor is placed between the nasocannula and the patient circuit to minimize the dead space.

7. TOUCH SCREEN
User Interface:
Ease of Use
Color Codes
Intuitive

8. ALARMS
The Endotracheal Giulia is equipped with various alarms to protect the patient. All the alarms are both acoustic and visual and colored according to priority.
Parameter
Unit
Lower limit
Upper limit
PIP
cmH2O
PIP - 5
PIP + 8
PEEP
PEEP – 3
PEEP + 3
FIO2 %
FIO2 – 10 not below 20 %
FIO not above %
The alarms limits are automatically adjusted accordng to the set value is changed. The tab illustrates how the automatic alarms are calculated.
It is possible for every parameters to set the limits of the relative alarms, by simply using the touch screen or the encoder.

9. GRAPHS
Possibility to choose the number and type of graphs to show on the screen(1 to 3 maximum graphs):
Pressure
Flow
Volume
P/V
P/F
V/F

10. WETTY
Giulia is compatible with all the humidifiers. Anyway, the use of Wetty assures the minimum level of condensation possible in the patient circuit.
The servo controlled WETTY is designed to humidify and heat up the gas inside the patient circuit.
It has been designed for neonatal and pediatric use and it is characterized by high technology, ease of use and maintenance.

11. Maintenance
In the interests of the patient safety it is recommended to proceed to the maintenance of the Giulia ventilator every six months.
During the maintenance only original GINEVRI srl spare parts must be used.
Assuming a maximum use of hours / year, the duration of the accumulator, of the oxygen sensor, the expiratory membrane, the pressure reducers filter and the anti dust filter of the GIULIA is of 1 year; the sensor board must be changed maximum every 3 years.