Presentation is loading. Please wait.

Presentation is loading. Please wait.

SAMPLE PROBLEM MATRA Input Preparation

Similar presentations


Presentation on theme: "SAMPLE PROBLEM MATRA Input Preparation"— Presentation transcript:

1 SAMPLE PROBLEM MATRA Input Preparation

2 SAMPLE PROBLEM – GE 3X3 2-PHASE FLOW TEST BUNDLE
Cross section geometry of TS Axial geometry and spacer grids Test information Parameter Value Heated length, inch Rod diameter, inch Rod pitch, inch Rod-to-wall gap, inch Radial power distribution Axial power distribution Pressure loss coefficient - Spacer grid form loss - Rod friction factor Pressure, psia TS inlet enthalpy, Btu/lbm TS inlet mass flux, Mlb/hr-ft2 TS average heat flux, MBtu/hr-ft2 72 0.570 0.738 0.135 Uniform 1.0 0.184 Re-0.2 1000 392.7 0.53 0.225

3 INPUT CARD DESCRIPTION
Requirements of MATRA Input Cards and Card Groups Group No. Description Case First Subsequent Initial card Required Not required Case control card 1 Fluid properties Optional 2 Friction factor, heat transfer coefficient, and two-phase flow correlations 3 Axial heat flux distribution 4 Channel layout and dimensions 5 Channel area variation 6 Gap spacing variation 7 Wire wrap and grid spacer information 8 Rod layout, dimensions, and properties 9 Calculation control 10 Lateral transport models 11 Operating conditions and transient forcing functions 12 Output display options

4 INITIAL & CASE CONTROL CARD

5 CARD-1: FLUID PROPERTY

6 CARD-2: FRICTION, HTC, TWO-PHASE FLOW CORRELATIONS

7 CARD-3: AXIAL HEAT FLUX DISTRIBUTION
Ex) cosine distribution

8 CARD-4: CHANNEL LAYOUT AND DIMENSION
AC (inch2) PW (inch) PH (inch) Ch.-1 0.0391 0.558 0.224 Ch.-2 0.1824 1.633 0.895 Ch.-3 0.1447

9 CARD-7: GRID SPACER INFORMATION

10 CARD-8: ROD LAYOUT, DIMENSION, AND PROPERTY

11 CARD-9: CALCULATION CONTROL

12 CARD-10: LATERAL TRANSPORT MODEL

13 CARD-11: OPERATING CONDITION & TRANSIENT FORCING FUNCTIONS

14 CARD-12: OUTPUT DISPLAY OPTION

15 MATRA INPUT FOR GE 3X3 TEST BUNDLE

16 SAMPLE PROBLEM MATRA Output

17 ITERATION RESULTS

18 CHANNEL RESULTS – CHANNEL EXIT SUMMARY

19 CHANNEL RESULTS – BUNDLE AVERAGE

20 CHANNEL RESULTS – FOR EACH CHANNEL

21 CROSSFLOW RESULTS

22 ROD RESULTS Results when fuel temperature calculation option was selected (Card 8, N3≠0)

23 CHF SUMMARY RESULTS


Download ppt "SAMPLE PROBLEM MATRA Input Preparation"

Similar presentations


Ads by Google