1. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
Date of download: 10/29/2017
Copyright © ASME. All rights reserved.
From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
J. Eng. Mater. Technol. 2007;129(3): doi: /
Figure Legend:
Schematic diagram of the bent-beam residual stress specimen

2. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
Date of download: 10/29/2017
Copyright © ASME. All rights reserved.
From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
J. Eng. Mater. Technol. 2007;129(3): doi: /
Figure Legend:
Hole-drilling relieved strains versus depth. The data points are measured values. The lines are the backcalculated strains corresponding to the fixed principal direction regularized stresses in Fig. .

3. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
Date of download: 10/29/2017
Copyright © ASME. All rights reserved.
From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
J. Eng. Mater. Technol. 2007;129(3): doi: /
Figure Legend:
Computed residual stresses: light (noisy) lines=unregularized results; bold (smooth) lines=regularized results; dashed (straight) lines=theoretical results. The upper three lines show the axial (X) stresses and the lower three lines show the transverse (Y) stresses.

4. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
Date of download: 10/29/2017
Copyright © ASME. All rights reserved.
From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
J. Eng. Mater. Technol. 2007;129(3): doi: /
Figure Legend:
Computed principal direction versus depth: light line=unregularized results; bold lines=regularized results

5. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
Date of download: 10/29/2017
Copyright © ASME. All rights reserved.
From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
J. Eng. Mater. Technol. 2007;129(3): doi: /
Figure Legend:
rms shear strain misfit qrms versus regularization factor α0 for the bent-beam specimen

6. From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
Date of download: 10/29/2017
Copyright © ASME. All rights reserved.
From: Hole-Drilling Residual Stress Profiling With Automated Smoothing
J. Eng. Mater. Technol. 2007;129(3): doi: /
Figure Legend:
Strain misfits due to noise removal and to stress profile distortion