1. Objective ITY-COTR
ESSIP Plan 2015
Luca DELL’ORTO
DPS/PEPR

2. Comprehensive Explanation (1/4)
This OBJ covers the implementation of Ground-Ground (G/G) data exchange and automated co-ordination procedures to reduce the controller workload and human errors as specified by Regulation
1032/2006 EC and
30/2009 EC (amending 1032/2009 EC – the ‘COTR’ Reg.).
Scope: EU+ States) (= EU+CH+NO+ECAA)
Applicability: to all ACC units providing services to GAT (not covered: ACC  TWR + ACC  APP)
Military SLoAs are applicable to all Military units regardless of their role (MIL being an ATS provider to GAT traffic or not) and coordination between CIV and MIL control units
ESSIP Plan 2015 / Objective ITY-COTR

3. Comprehensive Explanation (2/4)
EC 1032/2006 mandatory processes to implement
OLDI equivalent
ITY-COTR
SLoA – ASP and MIL
timeframe
Applicability
Notification Process
ABI
ASP02
EU+
Initial co-ordination
ACT
ASP03
Revision of Coordination
REV
ASP04
Abrogation of Coordination
MAC
ASP05
Basic Flight Data
BFD
ASP06
MIL01
Change to Flight Data
CFD
ASP07
MIL02
Safety Assessment -
ASP 10
EC 30/2009 mandatory processes
Logon Forward
LOF
ASP08
Next Authority Notified
NAN
ASP09
Non-mandatory requirements
(complementing EC Regulation)
Training of ATC Personnel
ASP11
ESSIP Plan 2015 / Objective ITY-COTR

4. Comprehensive Explanation (3/4)
ASP01 – concerns FDPS infrastructure, OLDI message processing , presentation and recording etc - States that have implemented OLDI will be compliant with this SLoA.
ASP02/03/04/05 - concerns FDPS capability to receive, process, present and sent the messages as specified.
ASP06/07 - to Flight Data Exchange with military ATS units.
ASP08/ASP09 - data link related messages with different deployment date (specified in regulation (EC) 30/2009)
ESSIP Plan 2015 / Objective ITY-COTR

5. Comprehensive Explanation (4/4)
ASP11 - ATCO training on automated flight data exchange; in most of the cases this action has been completed, the basic OLDI data exchange has been widely implemented at Pan European level. Note: this SLoA is not derived from the (EC) Regulations 1032/2006 or 30/2009.
MIL01/MIL02 - are related to capabilities of military ATS units to received, process or present BFD/CFD or receive or present CPRs
+ safety assessment of all changes:
ASP10 - safety assessment of any modification of automated flight data exchange.
ESSIP Plan 2015 / Objective ITY-COTR

6. What is new or has changed for ESSIP Plan ed. 2015
Change of completion ‘by’ dates for ASP08 (Logon Forward), ASP09 (Next Authority Notified) and ASP11 (training for ATC personnel), due to new regulation (EU) 310/2015 amending Regulation 29/2009 on Data Link (ASP08 and ASP09 are processes to provide the ATN or FANS/1A logon parameters to the receiving data-link equipped unit, to allow the unit to use the data link applications (CM, CPDLC, ADS, FIS).
ESSIP Plan 2015 / Objective ITY-COTR

7. Link to European ATM Master Plan
Eur. ATM Master Plan:
[CM-0201] - Automated Assistance to Controller for Seamless Coordination, Transfer and Dialogue
ESSIP Plan 2015 / Objective ITY-COTR

8. ITY-COTR – Most important SLoAs
All
Finalisation Criteria and Closed Questions
Ensure it is implemented with new FDPS or upgrade of current FDPS
Establish OLDI link with adjacent ACC, as an additional info to the finalisation criteria expressed in the SLoAs
Implement ACT/REV/ABI or MAC with adjacent unit, again as an additional info to the finalisation criteria expressed in the SLoAs
Does your FDPS support ACT/REV/ABI/MAC data reception/processing and sending?
Does exchange of messages with upstream/ downstream units ?
Does exchange BFD/CFD or CPS with military ATS units exist ?
FDPS upgrade planned to accommodate data link messages ?
ESSIP Plan 2015 / Objective ITY-COTR

9. ESSIP Plan 2015 / Objective ITY-COTR
Supporting Material
EUROCONTROL - SPEC EUROCONTROL Specification for On-Line Data Interchange (OLDI) - Edition OJ2011/C 146/05 /
EUROCONTROL - SPEC 106C1 - EUROCONTROL - Corrigendum to Specification for On-Line Data Interchange (OLDI) Edition OJ 2011/C 146/05 /
EUROCONTROL Specification 0107, Ed. 3.1 (2011), ‘Eurocontrol specification for ATS Data Exchange Presentation (ADEXP)’
NOTE:
EUROCONTROL Specification 0107, Ed. 3.1 was published by EUROCONTOL in October It supersedes Ed 3.0 as EC Community specification.
ESSIP Plan 2015 / Objective ITY-COTR

10. ESSIP Plan 2015 / Objective ITY-COTR
ESSIP Report 2014
ESSIP Plan 2015 / Objective ITY-COTR

11. ESSIP Plan 2015 / Objective ITY-COTR
Links and contacts
Objective Coordinator: Dell’Orto Luca,
EUROCONTROL Objective Expert:
Stephen Morton,
ESSIP Plan 2015 / Objective ITY-COTR