1. EM70 (Isobornyl Acrylate, IBOA)
ETERMER 70 is a highly reactive monomer, could be as a low viscosity diluent monomer in UV-curable system.
Molecular
Formula
CAS No.:
Typeical Value
Performance Highlight
Appearance (25℃) Clean/Clear
Viscosity (cps, at 25℃) – 15
Acid Value (mg KOH/g) max.
Color (APHA) max.
Specific Gravity (25℃) – 1.00
Moisture Content (%) max.
Inhibitor (MEHQ, ppm) – 300
․Good adhesion
․Good toughness
․Excellent abrasion resistance
․Good water and heat resistance

2. EM90 (Isobornyl Mathacrylate, IBOMA)
ETERMER 90 is a highly reactive monomer, could be as a low viscosity diluent monomer in UV-curable system.
Molecular
Formula
CAS No.:
Typeical Value
Performance Highlight
Appearance (25℃) Clean/Clear
Viscosity (cps, at 25℃) – 10
Acid Value (mg KOH/g) max.
Color (APHA) max.
Specific Gravity (25℃) – 0.99
Moisture Content (%) max.
Inhibitor (MEHQ, ppm) – 180
․Good adhesion
․Good toughness
․Excellent abrasion resistance
․Good water and heat resistance

3. EM75 (Benzyl Acrylate, BA)
ETERMER 75 is a highly reactive monomer, could be as a low viscosity diluent monomer in UV-curable system.
Molecular
Formula
CAS No.:
Typeical Value
Performance Highlight
Appearance (25℃) Clean/Clear
Viscosity (cps, at 25℃) – 6
Acid Value (mg KOH/g) max.
Color (APHA) max.
Specific Gravity (25℃) – 1.07
Moisture Content (%) max.
Inhibitor (MEHQ, ppm) – 300
․Low viscosity
․Good solvency
․High reactivity

4. EM77 (Benzyl Methacrylate, BMA)
ETERMER 77 is a highly reactive monomer, could be as a low viscosity diluent monomer in UV-curable system.
Molecular
Formula
CAS No.:
Typeical Value
Performance Highlight
Appearance (25℃) Clean/Clear
Viscosity (cps, at 25℃) – 3
Acid Value (mg KOH/g) max.
Color (APHA) max.
Specific Gravity (25℃) – 1.045
Moisture Content (%) max.
Inhibitor (MEHQ, ppm)
․Low viscosity
․Good solvency
․High reactivity

5. EM214 (Tetrahydrofurfuryl Acrylate, THFA)
ETERMER 214 is a highly reactive monomer, could be as a low viscosity diluent monomer in UV-curable system, and provides good adhesion on plastic substrate.
Molecular
Formula
CAS No.:
Typeical Value
Performance Highlight
Appearance (25℃) Clean/Clear
Viscosity (cps, at 25℃) – 6
Acid Value (mg KOH/g) max.
Color (APHA) max.
Specific Gravity (25℃) – 1.07
Moisture Content (%) max.
Inhibitor (MEHQ, ppm)
․Good weatherability
․Good chemical resistance
․Excellent adhesion for PC substrates

6. EM314 (Tetrahydrofurfuryl Methacrylate, THFMA)
ETERMER 314 is a highly reactive monomer, could be as a low viscosity diluent monomer in UV-curable system, and provides good adhesion on plastic substrate.
Molecular
Formula
CAS No.:
Typeical Value
Performance Highlight
Appearance (25℃) Clean/Clear
Viscosity (cps, at 25℃) – 10
Acid Value (mg KOH/g) max.
Color (APHA) max.
Specific Gravity (25℃) – 1.05
Moisture Content (%) max.
Inhibitor (MEHQ, ppm)
․Good weatherability
․Good chemical resistance
․Excellent adhesion for PC substrates

7. EM2051 (DCPA)
ETERMER 2051 is a low viscosity diluent monomer, could be used in dual-curable system.
Molecular
Formula
CAS No.:
Typeical Value
Performance Highlight
Appearance (25℃) Clean/Clear
Viscosity(cps, at 25℃)
Acid value(mg KOH/g) max.
Color(APHA) max.
Specific Gravity(25℃) – 1.08
Moisture Content(%) max.
Inhibitor(MEHQ, ppm) max.
Good flexibility
Good adhesion for metal
substrates

8. EM2052 (DCPEOA)
ETERMER 2052 is a low viscosity diluent monomer, could be used in dual-curable system.
Molecular
Formula
CAS No.:
Typeical Value
Performance Highlight
Appearance (25℃) Clean/Clear
Viscosity(cps, at 25℃) – 25
Acid value(mg KOH/g) max.
Color(APHA) max.
Specific Gravity(25℃) – 1.10
Moisture Content(%) max.
Inhibitor(MEHQ, ppm) max.
Good flexibility
Good adhesion for metal
substrates

9. EM2140
ETERMER 2140 is a monofunctional monomer which is under exposure to ionizing radiation or added sources of free radicals undergo polymerization.
Molecular
Formula
CAS No.:
Typeical Value
Performance Highlight
Appearance (25℃) Clean/Clear
Viscosity(cps, at 25℃) – 350
Acid value(mg KOH/g) max.
Color(APHA) max.
Specific Gravity(25℃) – 1.12
Moisture Content(%) max.
Inhibitor(MEHQ, ppm) max.
Good weatherability
Good adhesion for plastic
substrates
Good solvency for acrylate
oligomers
Good curing speed for
monofunctional monomer

10. EM2141
ETERMER 2141 is a monofunctional monomer which is under exposure to
ionizing radiation or added sources of free radicals undergo polymerization.
Molecular
Formula
CAS No.:
Typeical Value
Performance Highlight
Appearance (25℃) Clean/Clear
Viscosity(cps, at 25℃) – 380
Acid value(mg KOH/g) max.
Color(APHA) max.
Specific Gravity(25℃) – 1.15
Moisture Content(%) max.
Inhibitor(MEHQ, ppm) max.
Good weatherability
Good adhesion for plastic
substrates
Good solvency for acrylate
oligomers
Good curing speed for
monofunctional monomer

11. ETERCURE 6101
ETERCURE 6101 is a highly reactive oligomer, could be as a low viscosity oligomer in UV-curable system, and provides good adhesion on plastic substrate.
Molecular
Formula
CAS No.:
Typeical Value
Performance Highlight
Appearance (25℃) Clean/Clear
Viscosity (cps, at 25℃) – 40
Acid Value (mg KOH/g) max.
Color (APHA) max.
Specific Gravity (25℃) – 1.08
Moisture Content (%) max.
Inhibitor (MEHQ, ppm)
․Low viscosity
․Good flexibility
․Good Adhesion on Metal