1. 4. Activation Key KX-NS1000 Rev1.4 19 Jan., 2016
In this session, I will explain Activation Key

2. Introduction
NS1000 provides full pure-IP function by Activation Key service.
By this service, user can optimize own system.
There are some type of Activation Key type. Following shows type of Activation Key.
Centralized and Distributed Activation Key.
1) Centralized Activation Key : For Master Unit only
2) Distributed Activation Key : For Master and Slave Unit
Trial Activation Key.
There are 2 type of Pre Installed Activation Key. One is No Time Limited Activation Key to provide basic functions such as minimum IP-Phone configuration.
The other is Time Limited Activation Key (60Days) such as One Look networking function as trial purpose
NS1000 provide Activation Key for customizing optimized system for minimizing Communication System investment
There are some type of Activation Key such as
Required for Master unit only or for Master/Slave units each
NS1000 will shipped with Pre-Installed Key with no time Limited Activation Key (free of charge) and limited time
Activation Key. The Limited Activation Key will be use for trial, so if user want to use the function, user need to
Purchase Activation Key before expiration date. This help dealer to sale application products such as CA and
Unified Messaging system etc,, 2

3. Table of Contents Table of Contents Chapter 1 : General Information
- What is Activation Key
- Type of Activation Key -Centralized
- Type of Activation Key -Distributed
　　 - Trail and free use Activation Key
　　 - Concept of IP Telephone capacity Control
Chapter2 : How to get Activation Key
- What is Needed
- Procedure
Chapter3 : Activation Key Installation
- How to Install Activation Key
Chapter4 : Detailed Information
- Main Unit - Peripherals
- Main Unit -Service
- Network
- Unified Message Function
- Maintenance Function
- Communication Assistant
- Packaged Activation Key
- How to Configure Activation Key
Chapter 5: Required AK for function
- Required Activation Key
Appendix : Note and Caution
- Note
- Caution
Following is contents of the this session
,,,,,, 3

4. Chapter 1 General Information
At first I will explain Activation Key in general

5. Expand IP/SIP Capacity W/Trail Activation Key
1. General Information
What‘s Activation Key?
To use IP/SIP trunks and IP/SIP telephones and/or enabling the software for enhanced features,
you need the appropriate activation keys.
System has Trail Activation Keys for basic function (Free charge) and time limited Activation Keys
for trial use.
Customer can create own optimized Communication System by selecting Activation Key from
various Activation Keys.
Image of Activation Keys Customizing
Customized System
Activation Keys
Basic Configuration
IP/SIP
Expand IP/SIP Capacity
IP-NET
Slave
W/Trail Activation Key
Master
Network Function
Slave
Unified Messaging
CA/CTI Functions
What‘s Activation Key???
図はBasicとACKで十分
There are couple Activation Keys
First is, expand IP/SIP Trunks and extension capacity, second is for enhancement feature such as Networking , Unified Messaging service
And Communication assistant function.
In addition as I explained in introduction, NS1000 will be shipped with Pre-Installed Activation Key ,
So that NS1000 user can pick up from various activation key group and can reduce their investment by purchasing only necessary functions
Following diagram shows image of how to configure costumes system
For example, customer needs Network function, Unified Message and CA function with 30 IP Phone, Customer need to install
Activation Key for increasing IP Phone Networking, Unified Message and CA function 5

6. Centralized/Distributed Image of Activation Keys Installation
1. General Information
Centralized and Distributed Activation Key
There are 2 types of Activation Key as follows.
Centralized Activation Key : These Keys are needed only for Master Unit.
Distributed Activation Key: These Keys are needed for Unit Base
Following diagram shows how to install Centrized/Distributed Activation Keys.
Centralized/Distributed　
Image of Activation Keys　Installation
Distributed　
機能の有効化、要領を増やすのおおぐくりの説明に変える
In this section, I will explain installation base
There are 2 type of installation.
One is Centralized Installation. This type of Activation Key is needed to install only Master Unit.
The other is Distributed installation. This type of Activation Key is required to install each unit (Master and Slave Unit)
Following diagram shows image of installation.
Centralized Activation Key is installed to Master unit and Distributed Activation Key is installed to Master and
Slave unit each. In addition, Distributed Activation Key can be installed via Master unit.

7. 1. General Information
How to install Centralized and Distributed Activation Key
Install Distributed Activation key from Master Unit to Slave Unit
Login Master Unit and go to
Utility 5 Install Activation key
Select Activation Key file for Slave Unit
Then execute `Install`
1) Master Unit automaticaly find target Slave units by MPR-ID then install Activation Key
2) If Master Unit can not find matched MPR-ID from Slave Unit, Warning will be displayed
機能の有効化、要領を増やすのおおぐくりの説明に変える
In this section, I will explain installation base
There are 2 type of installation.
One is Centralized Installation. This type of Activation Key is needed to install only Master Unit.
The other is Distributed installation. This type of Activation Key is required to install each unit (Master and Slave Unit)
Following diagram shows image of installation.
Centralized Activation Key is installed to Master unit and Distributed Activation Key is installed to Master and
Slave unit each. In addition, Distributed Activation Key can be installed via Master unit.

8. Type of Activation Key (Centralized)
1. General Information
Type of Activation Key- Centralized
Type of Activation Key (Centralized)
Following Table is Cetralized Activation Keys List.
Item
Overview
Note
QSIG Enhanced Feature
Activate QSIG Network Features
2way Recording Users
User for 2way transfer function
CTI Interfcae
CTI Interface
Allow to use 3rd Part CTI
CSTA Multiplexer
Cellular Phone Extension
Activate Mobile Integration function
Call Centre Enhance
Built-in Call Centre Function
Two Way Rec Control
Two Way Rec by Supervisor
Built-in Router
Built-in Router Function
Message Backup
Message backup
16ch IP Sec
IP Sec for 16ch
Communication assistant
CA-PRO
CA Supervisor
CA Operator　Console
CA-Network
CA Thin Client Server Connection
.　Following table shows list of Centralized Activation Keys

9. Type of Activation Key (Distribution)
1. General Information
Type of Activation Key- Distributed
Following Table is Distibuted Activation Keys List
Item
Overview
Note
IP-Telephone Capacity
Increase IP/SIP-Extension capacity
30 ports are activated as default(*1)
One Look Network
Activate One Look Connection with
Master & Member Slave Unit must install
UM System Feature1
( REC Time Expansion)
Expand Message recording time to 15h
2 hours recording time are activated as default
UM System Feature2
(Two way REC Control)
Activate Manager function for 2 way recording and transfer
Allow to manage Automatic Recording Feature
UM System Feature3
(Message backup)
Activate Auto Backup function for recoded data
Enable message Automatic Back Up
UM System Mail Box
Allow to use client and notification
UM Ports
Enable UM Ports (2/4 ports)
2 Ports are activated as default
Type of Activation Key (Distribution)
Note: (*1) 30 IP-Extension can be installed to NS-1000 without extra Activation Keys, but for connecting IP Extension itself. User must purchase IP-Telephones Activation Keys when expnand over 8 Telephones (please reffer `IP-Telephone capacity Control Section)
Following table shows list of Distributed Activation Keys

10. Type of Activation Key (Distribution)
1. General Information
Type of Activation Key- Distributed
Item
Overview
Note
IP-Trunks
Activate IP-trunk(H323/SIP)
By default, all Activation Keys are used for SIP Trunk. (*1)
IPSofthone/IP-PT
Increase port size of IP/UT Phone and IP-Soft Phone
By default, all activation Keys are used as IP-Soft phone(*2)
IP-PT
Increase port size of　IP and UT Phone
8 ports IP-PT are pri-installed
SIP-Extension
Increase Ports size of 3rd party SIP Phone
NT700 is handled as SIP-Extension
Type of Activation Key (Distribution)
*1) IP-GW Channel must be set by Activation Key Status
Must set Number of IP-GW channel
*2) Number of IP Softphone must be changed
By default, all channels are dedicated to IP-Softphone
Following table shows list of Distributed Activation Keys

11. 1. General Information Trial/Free use Activation Key
There are 2 kinds of Trial Activation Keys. One is free charge Activation Key, the other is time limited Activation Keys.
When Customer wants to keep using the function, Customer must purchase needed Activation Key before expire.
Trial/Free Use Activation Key
Category
Function Overview
Note
IP-Phone Capacity
Up to 30 IP-PTs, KX-UT Phone and 3rd party SIP Phone
Free Use
IP-PT　(Properly IP-Phone)
8 IP-PT/KX-UT SIP Phone UM
2ch/2 hours recording
UM/ Client (128 uses)
Expire after 60days
2 way record control (Automatic　2way recording)
Message Back up
(Automatic Recorded Message Back UP)
2Way recording (30 users)
Communication assistant
CA Basic Express (1022users)
CA PRO(128 users), CA Supervisor (1 user), CA Operator Console (1 user), CA Thin Client Server Connection, CA CSTA Multiplexer
One Look Networking
Networking Function
Cell phone Extension
Mobile integration (30users)
I explain Pre-Installed Activation Keys
NS1000 will be shipped with Pre-Installed Activation Key with it. There are 2 type of Pre-Installed Activation Key
One is free charge. These type of Activation is for NS1000 Basic configurations, the other for trial use. Customer can use these service 60 days.
Then customer has interesting the service, customer can keep using this service by purchasing necessary Activation Keys
Following table shows Pre-Installed Activation Keys list. Green hunching shows free of charge.

12. Image of IP Telephone capacity control
1. General Information
Concept of IP Telephone Capacity and port Control
IP Telephone capacity is controlled by Activation Key. The concept of IP-Telephone capacity control method is, define size of KSU by Activation KEY
User needs to expand IP Phone installation capacity, user must purchase new KSU by purchaseing activation Key (Just Replace KSU)
When user need to install IP/SIP terminal, user need to purchase IP/SIP ports activation key as same as just purchasing
30 Ports KSU
KX-NSM010
640port KSU
KX-NSM099
Replace KSU
100 port KSU
8 P I-PT
Initial Config.
IP/SIP terminal control Activation Key (KX-NS<2XX,NSM5XX,NSM7XX)
Move card
Add Card.
Image of IP Telephone capacity control
I explain Pre-Installed Activation Keys
NS1000 will be shipped with Pre-Installed Activation Key with it. There are 2 type of Pre-Installed Activation Key
One is free charge. These type of Activation is for NS1000 Basic configurations, the other for trial use. Customer can use these service 60 days.
Then customer has interesting the service, customer can keep using this service by purchasing necessary Activation Keys
Following table shows Pre-Installed Activation Keys list. Green hunching shows free of charge.

13. How to Get Activation Key
Chapter 2
How to Get Activation Key
Next session explain how to submit and get Activation Keys.

14. 2. How to Get Activation Key File
What is needed
Following three information is necessary to get the Activation Key file.
MPRID
MPRID is unique Number for each NS1000, it will be required when you purchase Activation Key
MPRID is located on back side of Unit
2. Registration ID
When you purchase Activation Key, Sales company will inform this ID
3. Activation Key No
When you purchase Activation Key, Sales company will inform this No also
NE,NAと一般と3パターンあり（3つの方式別スライドに）
Stepha左から右へ
MPRID等々が分かるようにする
NEXT is Procedure for getting the Activation Key File
Activation Key file is generated by Key Management Server. You can connect KMS over internet.
To get Activation Key file, you need
1.Activation Key No.
2.Registration ID
3.MPR ID
When you order Activation Key with MPR-ID, you can get Activation Key No, and Registration ID
Note: you are in Europe or USA(NE Model), you will get the information by
If you are other region, you will get information by ID-Card
MPR-ID is on MPR-Card.
ON Step2, you access KMS with 3 information, you will get Activation file after KMS generate the Key file

15. 2. How to Get Activation Key File
Procedure (USA)
Following Flow shows how to get Activation Key fileKey
Sales Company
KMS
Process for getting Activation Key File
Step1:
Purchase System components
Get the three information
Dealer
Activation Key No. Registration ID
Step2:
Access the KMS and Input three information
Step3:
Generate
AK File
Step4:
Download the Activation
Key File
MPR ID
MPR ID, Activation Key No.
and Registration ID
Activation Key File
PSNA
Note:
Activation Key No and Registration ID
will be sent by
Server
NE,NAと一般と3パターンあり（3つの方式別スライドに）
Stepha左から右へ
MPRID等々が分かるようにする
NEXT is Procedure for getting the Activation Key File
Activation Key file is generated by Key Management Server. You can connect KMS over internet.
To get Activation Key file, you need
1.Activation Key No.
2.Registration ID
3.MPR ID
When you order Activation Key with MPR-ID, you can get Activation Key No, and Registration ID
Note: you are in Europe or USA(NE Model), you will get the information by
If you are other region, you will get information by ID-Card
MPR-ID is on MPR-Card.
ON Step2, you access KMS with 3 information, you will get Activation file after KMS generate the Key file

16. 2. How to Get Activation Key File
Procedure (Europe)
Following Flow shows how to get Activation Key fileKey
Sales Company
KMS
Process for getting Activation Key File
Step1:
Purchase System components
Get the three information
Dealer
Activation Key No. Registration ID
Step2:
Access the KMS and Input three information
Step3:
Generate
AK File
Step4:
Download the Activation
Key File
MPR ID
MPR ID, Activation Key No.
and Registration ID
Activation Key File
PSNE
Note:
Activation Key No and Registration ID
will be sent by
PSN
Server
NE,NAと一般と3パターンあり（3つの方式別スライドに）
Stepha左から右へ
MPRID等々が分かるようにする
NEXT is Procedure for getting the Activation Key File
Activation Key file is generated by Key Management Server. You can connect KMS over internet.
To get Activation Key file, you need
1.Activation Key No.
2.Registration ID
3.MPR ID
When you order Activation Key with MPR-ID, you can get Activation Key No, and Registration ID
Note: you are in Europe or USA(NE Model), you will get the information by
If you are other region, you will get information by ID-Card
MPR-ID is on MPR-Card.
ON Step2, you access KMS with 3 information, you will get Activation file after KMS generate the Key file

17. 2. How to Get Activation Key File
Procedure (Except USA/Europe )
Following Flow shows how to get Activation Key fileKey
Sales Company
KMS
Process for getting Activation Key File
Step1:
Purchase System components
Get the three information
Dealer
Activation Key No. Registration ID
Step2:
Access the KMS and Input three information
Step3:
Generate
AK File
Step4:
Download the Activation
Key File
MPR ID
MPR ID, Activation Key No.
and Registration ID
Activation Key File
Sales
Company
Note:
Activation Key No and Registration ID
will be sent by Card
PSN
Server
NE,NAと一般と3パターンあり（3つの方式別スライドに）
Stepha左から右へ
MPRID等々が分かるようにする
NEXT is Procedure for getting the Activation Key File
Activation Key file is generated by Key Management Server. You can connect KMS over internet.
To get Activation Key file, you need
1.Activation Key No.
2.Registration ID
3.MPR ID
When you order Activation Key with MPR-ID, you can get Activation Key No, and Registration ID
Note: you are in Europe or USA(NE Model), you will get the information by
If you are other region, you will get information by ID-Card
MPR-ID is on MPR-Card.
ON Step2, you access KMS with 3 information, you will get Activation file after KMS generate the Key file

18. Activation Key Installation
Chapter 3
Activation Key Installation
Next section explain how to install Activation Key

19. 3 Activation Key Installation
How to Install Activation Key (Step1)
Step1: Copy Activation Key File to NS1000 by Web PCMC Utility Function
Activation Key File
Select Activation Key Installation from Utility menu
Select target Activation Key file and execute `Install`
When succeed installation, following message will be displayed
.　After get Activation Key information, you must install Activation. This is step how to install Key file
Step1: After get Activation Key file from KMS, you should copy Activation Key File to NS1000 by PCMC Utility function
Step2: Open Slot menu and select Activation Key Tab, then execute the service
Step3: After complete Step2, confirm Activation installation status by PCMC menu

20. 3 Activation Key Installation
How to Install Activation Key (Step 2)
Step2: Confirm Installed Activation Key
Installed Activation Key will be showed up
Select Activation Key file by Utility 3.File view menu and click Detail icon
.　After get Activation Key information, you must install Activation. This is step how to install Key file
Step1: After get Activation Key file from KMS, you should copy Activation Key File to NS1000 by PCMC Utility function
Step2: Open Slot menu and select Activation Key Tab, then execute the service
Step3: After complete Step2, confirm Activation installation status by PCMC menu

21. 3 Activation Key Installation
How to Install Activation Key (Step 3)
Step3: Activate Trial Activation Key
Open PBX-Configuration Slot menu
Click Activate Pre-Installed Activation Keys Icon
Select function which you need to activate from Trial Activation Key
Note: Installed Activation Key will be hunched
Note: Warrning will be ed to superviser 10 days before expiration of
Trial Activation Key
.　After get Activation Key information, you must install Activation. This is step how to install Key file
Step1: After get Activation Key file from KMS, you should copy Activation Key File to NS1000 by PCMC Utility function
Step2: Open Slot menu and select Activation Key Tab, then execute the service
Step3: After complete Step2, confirm Activation installation status by PCMC menu

22. 3 Activation Key Installation
How to Back up Activation Key
How to back up Activation Key to USB Memory
In Utility - Tool- 1. System Data Back up menu
Select `Activation Key` and press Execute
Press Continue after display Warning Message
Press `OK` after complite Back Up
Note:1) Need to install USB Memory to Unit before Back Up
2) After suceed Back Up, User can copy the back up data to PC and can restore
.　After get Activation Key information, you must install Activation. This is step how to install Key file
Step1: After get Activation Key file from KMS, you should copy Activation Key File to NS1000 by PCMC Utility function
Step2: Open Slot menu and select Activation Key Tab, then execute the service
Step3: After complete Step2, confirm Activation installation status by PCMC menu

23. Chapter 4 Detail Information
I will explain detail Activation Key status in this section

24. 4. Detailed Information Main Unit - Peripheral
There are 6 Types of Activation Key related with Main Unit (Port size control).
1) IP Extension Capacity for initial purchase
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
IP Extension
KX-NSM005
31 to 50 ports
640 Ports
1000 Ports
Max 30 ports IP Phones (IP-PTs/KX-UT/
IP-softphone and 3rd party SIP phone)
are available without Activation Key
KX-NSM010
ports
KX-NSM030
ports
KX-NSM099
ports
Note:
1) By this setting, user needs to set up total number of IP-PT/IP Soft Phone, KX-UT series and 3rd party SIP Phone
2) If user want to increase number of IP-Ext, user must purchase new Activation Key Case: User install ports Activation Key, then user want to increase ports size to 90 ports, then user must 　purchase ports Activation Key
Current: Running 40 Port
(KX-NSM005)
Expand to 90 Ports
Replace KX-NSM005 to KX-NSM010
(Can not use 2 KX-NSM005)
数字とPorts　はスペース必要
ActivationKey]に統一する。
. This is main unit related Activation key. This type Activation Key control Capacity of peripherals There 5 types of Activation Key in this type
,,,,

25. 4. Detailed Information Main Unit - Peripheral Model Name Feature
There are 6 Types of Activation Key related with Main Unit (Port size control).
2) IP Extension Capacity for future expansion ( incremental expansion AK )
Model Name
Feature
Maximum No
Description
Note
KX-NSX910
Expansion AK
from NSM005 1
IP phone Capacity is increased to 100ports
KX-NSX930
from NSM010
IP phone Capacity is increased to 300ports
KX-NSX999
from NSM030
IP phone Capacity is increased to 640ports

26. 4. Detailed Information Main Unit - Peripheral 3) IP Trunks
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
IP-TRUNK
(H323/SIP-
Trunk)
KX-NSM102
2ch IP-Trunk(H.323/SIP)
256 Ports
(48 for H323)
(96 for H323)
1) Max 256 Ports per Unit/System
2) When expire Activation Key,
system automatically reset
referenced System
3) By default, all ports will be
assigned as SIP TRUNK(*1)
KX-NSM104
4ch IP-Trunk(H.323/SIP)
KX-NSM108
8ch IP-Trunk(H.323/SIP)
KX-NSM116
16ch IP-Trunk(H.323/SIP)
Note: (*1)　Need to specify number of H323 trunks activated by Configuration menu
IP-Trunk can be used for not only TIE Line but also for IP Trunk function
4) IP Soft phone/IP PT and UT Phone
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
IP Soft phone
/IP-PT and UT
Phone ports
KX-NSM201
1 port Soft-Phone/IP-PT
640 Ports
(128 IP-PTs)
1000 Ports
(256 IP-PTs)
This Max capacity is total number of
Extension including IP-PT/KX-UT and
IP-Softphone
KX-NSM205
5 ports Soft-Phone/IP-PT
KX-NSM210
10 ports Soft-Phone/IP-PT
KX-NSM220
20 ports Soft-Phone/IP-PT
Note: 　Regarding IP Soft-Phone/IP-PT /SIP-SLT/SIP-MLT and KX-UT Ship Phone Activation Key,
Soft-Phone has priority to use Activation Key when exceed total number of Soft-Phone and IP PT
数字とPorts　はスペース必要
ActivationKey]に統一する。
. This is main unit related Activation key. This type Activation Key control Capacity of peripherals There 5 types of Activation Key in this type
,,,,

27. 4. Detailed Information Main Unit - Peripheral 5) IP PT/UT Phone
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
IP-PT
Ports size
KX-NSM501
1 port IP-PT/KX-UT
Phone
640 Ports
1000 Ports
1)Max 8 ports IP-PT are available without
Activation Key
2) This Max capacity is total number of
Extension including IP-PT and KX-UT
KX-NSM505
5 ports IP-PT/KX-
UT Phone
KX-NSM510
10 ports IP-PT/KX-
KX-NSM520
20 ports IP-PT/KX-
6) SIP-Extension
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
SIP Extension
port size
KX-NSN701
1 port SIP Extension
640 Ports
1000 Ports
This Max capacity is total
number of Extension including
Conference Phone(NT700) and 3rd
party SIP Phone
KX-NSM705
5 ports SIP Extension
KX-NSM710
10 ports SIP Extension
KX-NSM720
20 ports SIP Extension .　

28. 4. Detailed Information Network
There are 2 types of Network related Activation Key as follow.
1) One Look networking
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
One look Network
Function
KX-NSN001
Enable One look
Networking NA
16 AK(*1)
Each Unit has to have this AK
*1: AK means Activation Key
2) Q-Sig Network
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
Q-Sig network
functions
KX-NSN002
Enable following enhanced
Q-SIG Network
1) Network DSS
2) Centralized VM
3) Network Extension
4) Network ICD Group
1 AK (Master Unit only)
For System base, need
to install Master unit only
.　Next is Network function related. There are 2 types of Activation Key

29. 4. Detailed Information Main Unit - Service
There is 1 type of Main Unit Function related Activation Key as follow.
1) Cellular Phone Extension
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
Control Cell
Phone integration
users
KX-NSE101
1 user
1152 Cell phones
1) Allow to use Cell integration
function
2)This is for System base, need to install
Master unit only
KX-NSE105
5 users
KX-NSE110
10 users
KX-NSE120
20 users
Note: 1． Activation Key will be adopted when Cell Phone integration is activated
and the Cell related Extension's setting for Cell Phone integration should be `Enabled`
2. User must enable `Mobile Extension` setting to Enable in Extension Setting me menue
These AK is required to use below features; 1)Outside Destinations in Incoming Call Distribution Group 2)Cellular Phone XDP Parallel Mode 3)Parallel Ringing When Forwarding to Trunk 4)DISA Automatic Walking COS 5)DISA Call Transfer From Outside Destination
このAKを有効にするにはMobile ExtensionをEnableにする必要あり。
以下、再確認中
この設定はインストールしたAK数を超えても可能であるが、Enableにした順番で
この機能は使用できる。
例）AK数：5user
内線101->102->103->104->105->106->107の場合、
はこの機能を使用可能
106,107は不可
※但し、本体をリセットした場合は、本体にRegあげた順番に使用可能

30. 4. Detailed Information Unified Messages function Compact Flash
There are 6 types of Unified Message related Activation Key as follow.
1) UM System Function 1(Recording Time Expansion)
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
Recording
time length
KX-NSU001
15 hours
1 AK
16 AK
When install SM-S/M/L (Compact Flash Card)
User does not need to install this AK
Compact Flash
Max recoding time
SM-S (KX-NS0135)
200H
SM-M (KX-NS0136)
450H
SM-L (KX-NS0137)
1000H
Note: Right side table shows Max. recording time for each CF
When install these CF, user need not to install Activation Key
.　Third is Unified Messaging function related.
There are 6 types of Activation Key in this category

31. 4. Detailed Information Unified Messages function
There are 6 types of Unified Message related Activation Key as follow.
2) UM System Function 2 (2Way REC Control)
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
Control 2way
recording
KX-NSU002
Enable 2Way
recording control
1 AK
16 AK
Allow to use Manager function to
Control Automatic 2Way Recording
3) UM System Function 3 (Message Back up)
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
Message
Back Up
KX-NSU003
Enable Automatic
UM Message Back UP
1 AK
16 AK
Enable Allows the automatic
backup of messages to USB
memory.
4) UM Ports
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
Unified
Message
Ports
KX-NSU102
2 UM Ports
24 ports
384 ports
１) Max 24 UM ports per one unit
2) KX-NSU102 is initially installed as default
3) Need for each unit
KX-NSU104
4 UM Ports
.　Third is Unified Messaging function related.
There are 6 types of Activation Key in this category

32. 4. Detailed Information Unified Messages function
5) Unified Messaging System (Mail box)
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
Control UM
Client (IMAP4) and
Notification Users
KX-NSU201
1 user
1024
Mailboxes
16384
Enable UM (IMAP4) client and
notification users.
It is necessary to install this AK for using
FAX Driver.
KX-NSU205
5 users
KX-NSU210
10 users
KX-NSU220
20 users
KX-NSU299
No Limitation
6) 2way Recording/Transfer users
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
2way recoding
Users
KX-NSU301
1 user
640 users
1000 users
Allow to use 2Way recording and
transfer Function
KX-NSU305
5 users
KX-NSU310
10 users
KX-NSU320
20 users
KX-NSU399
No Limitation
AK KX-NSU2xxがないとMailbox Clientパスワードが設定できない。
つまり、このAKが無いとFAXドライバーも使えない？！

33. 4. Detailed Information Communication Assistant
There are 5 types of CA related Activation Key as follow.
1) CA PRO
Item\
Model
Number
Detail
Capacity
Note
Standalone
One Look
CA Professional
KX-NSA201
For 1user
1022 users with Server mode
240 users with PBX mode
1. Enable CA Professional
(1st Party CTI function)
2. CA server must be needed when
Install more than 240 CA users
KX-NSA205
For 5users
KX-NSA210
For 10users
KX-NSA240
For 40users
KX-NSA249
For 128users
2) CA Supervisor
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
CA Supervisor
KX-NSA301
For One user
128 users with Server mode
4 users with PBX mode
Enable CA Supervisor
.　Last is Communication assistant related Activation Key

34. 4. Detailed Information Communication Assistant
There are 5 types of CA related Activation Key as follow.
3) CA Operator Console
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
CA Operator
Console
KX-NSA401
For One user
128 users with Server mode
128 users with PBX mode
Enable CA Operator Console
4) CA Network
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
CA Network
KX-NSA901
For 1user
1022 Users with Server mode
240 users with PBX mode
Enable CA Server Network
Function
KX-NSA905
For 5users
KX-NSA910
For 10users
KX-NSA940
For 40users
KX-NSA949
For 128users
.　Last is Communication assistant related Activation Key

35. 4. Detailed Information Communication Assistant
There are 5 types of CA related Activation Key as follow.
5) CA Thin Client
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
CA Thin Client
KX-NSA010
Enable Thin Client
service for CA
1AK
Enable CA client function by
Think client environment .　

36. 4. Detailed Information CTI Related 1) CTI Interface
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
CTI Integration
KX-NSF101
Use 3rd party CTI application
using CSTA interface
1AK
2) CSTA Multiplexer
Item
Model
Number
Detail
Capacity
Note
Standalone
One Look
CSTA Multiplexer
KX-NSA210
Enable CSTA Multiplexer
function
1AK .　

37. 4. Detailed Information Built In Features Model Name Feature
Call Center Activation Key
Model Name
Feature
Maximum No
Description
Note
KX-NSF201
Call center
Enhancement 1
Built-in ACD Report, Announcement of
waiting number for queuing *1
Router/VPN Activation Key
Model Name
Feature
Maximum No
Description
Note
KX-NSN101
Built-in Router 1
Activate Router function *1
KX-NSN216
IPsec (VPN)
(16sessions) 2
Activate 16 sessions of IP-VPN (IPsec) for
Note *1) These features can be used as free trial for 60days.
Ch Expansion Activation Key
Model Name
Feature
Maximum No
Description
Note
KX-NSE2XX XX=01, 05,10, 20
NS0154 ch expansion
64: stand alone
128:One-look
Increases the number of communication channels from 4 to 8 for 1 IP-CS (KX-NS0154 only).

38. 4. Detailed Information Built In Features
KX-NSXF021 and KX-NSXF022 are a separated AK from Call center Feature Enhancement (KX-NSF201).
Ether KX-NSF201 or one of the new AK is required for Queue Announcement or built-in ACD.

39. 4. Detailed Information Packaged Activation Key
1) Standard Package ( and 2 way recording)
Item
Model
Number
Detail
Note
STD Package
KX-NSP001
For 1user
Packaged
1) Client(KX-NSU2XX)
2) 2Way Recording/Transferring function(KX-NSU3XX)
KX-NSP005
For 5users
KX-NSP010
For 10users
KX-NSP020
For 20 users
2) Advanced Package ( , 2 way recording, Cellular integration and CA Pro)
Item
Model
Number
Detail
Note
ADV Package
KX-NSP101
For 1user
Packaged
1) Client(KX-NSU2XX)
2) 2Way Recording/Transferring function(KX-NSU3XX)
3) Cellular Integration (KX-NSE1XX)
4) CA Pro (KX-NSA2XX)
KX-NSP105
For 5users
KX-NSP110
For 10users
KX-NSP120
For 20users .　

40. 4. Detailed Information Packaged Activation Key
3) Mobile Package ( and Cellular integration)
Item
Model
Number
Detail
Note
Mobile Package
KX-NSP201
For 1user
Packaged
1) Client(KX-NSU2XX)
2) Cellular Integration(KX-NSE1XX)
KX-NSP205
For 5users
KX-NSP210
For 10users
KX-NSP220
For 20users .　

41. 4. Detailed Information
How to Configure Activation Key (Example1- Basic Model)
Service and peripheral
Master Unit
ISP
SIP Trunk
System Configuration
System
Equipment/Service
Master
Unit
1) 38 IP(NT,UT) Extension
2) 10 IP(H323/SIP) Trunk
3) 4channel,15H-UM Recording
4) 30 2way-Recording users
Necessary Activation Key
System
Equipment AK
1) 50 IP Phone Installation
KX-NSM005
2) 16 IP Trunk
KX-NSM116
3) IP PT (8 free)
KX-NSM510,520
5) 4 channel UM ports
KX-NSU104
6) Record time Expansion
KX-NSU001
7) 2Way REC all users
KX-NSU399
The actual physical connection diagram.
If PBXs are installed in Branch Offices, local calls can be made easily using local trunks.
So, local call charges can be reduced.
The PBXs installed in branch offices can also support additional extensions and UM features.
The PBX located at head office is called “Master Unit”.
The PBX located at branch office is called “Slave Unit”.
The master unit controls one or more slave units and provides call control features for all extensions within one-look networking.
So, the One-Look concept, “It looks like one PBX system, even though two or more PBXs are networked together.”,
is still maintained.
In other words, the slave unit behaves as though the expansion shelf of TDE600.

42. 4. Detailed Information
How to Configure Activation Key (Example2- Networking)
Service and peripheral
System Configuration
ISP
System
Equipment/Service
Master
Unit
1) One-Look Networking
2) 38 IP(NT,UT) Extension
3) 10 IP(H323/SIP) Trunk
4) 4channel,15H-UM Recording
5) 30 2way-Recording users
Slave
2) 30 3rd vender SIP Extension (Free AK)
3) 1 PRI30
4) 10 2way-Recoring users
Master Unit
SIP Trunk IP
Network
Necessary Activation Key
Slave Unit
PTSN
System
Equipment AK
Master
Unit
1) One-Look Networking
KX-NSN001
2) 50 IP Phone Installation
KX-NSM005
3) 16 IP Trunk
KX-NSM116
4) IP PT (8 free)
KX-NSM510,520
5) 4 channel UM ports
KX-NSU104
6) Record time Expansion
KX-NSU001
7) 2Way REC all users
KX-NSU399
Slave
2) SIP Extension
KX-NSM710,720
3) 2Way REC 20 users
KX-NSU320
ISND/PRI
The actual physical connection diagram.
If PBXs are installed in Branch Offices, local calls can be made easily using local trunks.
So, local call charges can be reduced.
The PBXs installed in branch offices can also support additional extensions and UM features.
The PBX located at head office is called “Master Unit”.
The PBX located at branch office is called “Slave Unit”.
The master unit controls one or more slave units and provides call control features for all extensions within one-look networking.
So, the One-Look concept, “It looks like one PBX system, even though two or more PBXs are networked together.”,
is still maintained.
In other words, the slave unit behaves as though the expansion shelf of TDE600.

43. 4. Detailed Information
How to Configure Activation Key (Example3- Networking With App.)
Service and peripheral
System Configuration
System
Equipment/Service
Master
Unit
1) One Look Networking with CA
2) 40 IP(NT,UT) Extension
3) 10 IP(H323/SIP) Trunk
4) 2channel,4H-UM Recording (Free AK)
5) 30 CA Pro users
6) 30 UM/ Client
Slave
1) One-Look Networking with CA
2) 30 3rd vender SIP Extension (Free AK)
3) 10 CA PRO Users
4) 10 UM/ Client
SIP Trunk
Master Unit
ISP
CA Server
CA Pro User
Necessary Activation Key IP
Network
System
Equipment AK
Master
Unit
1) One-Look Networking
KX-NSN001
2) 50 IP Phone Installation
KX-NSM005
3) 16 IP Trunk
KX-NSM116
4) 2x 20 IP PT
2x KX-NSM520
5) CA Pro 40 Users (include
Slave)
KX-NSA240
6) UM/ All Users
KX-NSU299
Slave
2)10+20 SIP Extension
KX-NSM710,720
3)10 UM/ Client
KX-NSU210
Slave Unit
CA Pro User
The actual physical connection diagram.
If PBXs are installed in Branch Offices, local calls can be made easily using local trunks.
So, local call charges can be reduced.
The PBXs installed in branch offices can also support additional extensions and UM features.
The PBX located at head office is called “Master Unit”.
The PBX located at branch office is called “Slave Unit”.
The master unit controls one or more slave units and provides call control features for all extensions within one-look networking.
So, the One-Look concept, “It looks like one PBX system, even though two or more PBXs are networked together.”,
is still maintained.
In other words, the slave unit behaves as though the expansion shelf of TDE600.

44. 4. Detailed Information
How to Configure Activation Key (Example4- H323-QSIG With App.)
System Configuration
Service and peripheral
SIP Trunk
System
Equipment/Service
Master
Unit
1) H323 Qsig network with CA 2) 40 IP(NT,UT) Extension
3) 10 IP(H323/SIP) Trunk 4) 2channel,4H-UM Recording (Free AK)
5) 30 CA Pro users 6) 30 UM/ Client
Slave
1) H323 Qsig network with CA
2) 30 3rd vender SIP Extension (Free AK)
3) 10 CA PRO Users 4) 10 UM/ Client HQ
ISP
CA Server
CA Pro User
Necessary Activation Key
System
Equipment AK
Master
Unit
1) Q-Sig Network
KX-NSN002
2) 50 IP Phone Installation
KX-NSM005
3) 16 IP Trunk
KX-NSM116
4) 2x 20 IP PT
2x KX-NSM520
5) CA Pro 40 Users (include
Slave)
KX-NSA240
6) UM/ All Users
KX-NSU299
7) CA network 40 Users
(include Slave)
KX-NSA40
Slave
1)10+20 SIP Extension
KX-NSM710,720
2)10 UM/ Client
KX-NSU210
H323-Q-Sig
Network
Branch
The actual physical connection diagram.
If PBXs are installed in Branch Offices, local calls can be made easily using local trunks.
So, local call charges can be reduced.
The PBXs installed in branch offices can also support additional extensions and UM features.
The PBX located at head office is called “Master Unit”.
The PBX located at branch office is called “Slave Unit”.
The master unit controls one or more slave units and provides call control features for all extensions within one-look networking.
So, the One-Look concept, “It looks like one PBX system, even though two or more PBXs are networked together.”,
is still maintained.
In other words, the slave unit behaves as though the expansion shelf of TDE600.

45. 4. Detailed Information
How to Configure Activation Key (Example5- H323-QSIG With Mobile)
System Configuration
Service and peripheral
System
Equipment/Service
Master
Unit
1) H323 Qsig network with CA
2) 40 IP(NT,UT) Extension
3) 10 IP(H323/SIP) Trunk
4) 2channel,4H-UM Recording (Free AK)
5) 15 Mobile users
Slave
1) H323 Qsig network with CA
2) 30 3rd vender SIP Extension (Free AK)
ISP HQ
SIP Trunk
Necessary Activation Key
System
Equipment AK
Master
Unit
1) Q-Sig Network
KX-NSN002
2) 50 IP Phone Installation
KX-NSM005
3) 16 IP Trunk
KX-NSM116
4) 2x 20 IP PT
2x KX-NSM520
5) 20 Mobile users
KX-NSE120
Slave
1)10+20 SIP Extension
KX-NSM710,720
H323-Q-Sig
Network
Branch
The actual physical connection diagram.
If PBXs are installed in Branch Offices, local calls can be made easily using local trunks.
So, local call charges can be reduced.
The PBXs installed in branch offices can also support additional extensions and UM features.
The PBX located at head office is called “Master Unit”.
The PBX located at branch office is called “Slave Unit”.
The master unit controls one or more slave units and provides call control features for all extensions within one-look networking.
So, the One-Look concept, “It looks like one PBX system, even though two or more PBXs are networked together.”,
is still maintained.
In other words, the slave unit behaves as though the expansion shelf of TDE600.

46. 4. Detailed Information
How to Configure Activation Key (Example6- Automatic 2Way REC)
System Configuration
Service and peripheral
SIP Trunk
ISP
Master Unit
System
Equipment/Service
Master
Unit
1) One Look Networking with CA 2) 40 IP(NT,UT) Extension
3) 10 IP(H323/SIP) Trunk 4) 2channel,4H-UM Recording (Free AK)
5) Automatic 2Way Record control
Slave
1) One-Look Networking with CA
2) 30 3rd vender SIP Extension (Free AK)
3) Automatic 2Way Record control
2Way REC Control
Necessary Activation Key IP
Network
System
Equipment AK
Master
Unit
1) One-Look Networking
KX-NSN001
2) 50 IP Phone Installation
KX-NSM005
3) 16 IP Trunk
KX-NSM116
4) 2x 20 IP PT
2x KX-NSM520
5) Automatic 2Way REC control
KX-NSU002
Slave
2)10+20 SIP Extension
KX-NSM710,720
3) Automatic 2Way REC control
Slave Unit
2Way REC Control
The actual physical connection diagram.
If PBXs are installed in Branch Offices, local calls can be made easily using local trunks.
So, local call charges can be reduced.
The PBXs installed in branch offices can also support additional extensions and UM features.
The PBX located at head office is called “Master Unit”.
The PBX located at branch office is called “Slave Unit”.
The master unit controls one or more slave units and provides call control features for all extensions within one-look networking.
So, the One-Look concept, “It looks like one PBX system, even though two or more PBXs are networked together.”,
is still maintained.
In other words, the slave unit behaves as though the expansion shelf of TDE600.

47. Required AK by function
Chapter 5
Required AK by function
I will explain detail Activation Key status in this section

48. 5. Required Activation Key
Required Activation Key for each function
1) Mobile Integration Related
Function
Activation Key
Note
ICD- Group function
KX-NSE1XX
Set outside phone as ICD member phone
Function
Activation Key
Note
Parallel Ringing
KX-NSE1XX
Set Parallel Pinging to internal extension when call is forwarded
to out side phone such as Cell Phone
Function
Activation Key
Note
Automatic Walking COS
Control over DISA
KX-NSE1XX
Set Walking class of service from outside via DISA service
2 ) CTI and application Related
Function
Activation Key
Note
CTI Integration
KX-NSF101
Use 3rd party CTI application using CSTA interface .　

49. 5. Required Activation Key
Required Activation Key for each function
3) UM Related
Function
Activation Key
Note
Expand UM port
KX-NSU102,104
Expand UM port to 2/4 channel
Function
Activation Key
Note
Manage 2way recoding
KX-NSU002
Manage recorded message over WEB interface
Function
Activation Key
Note
Scheduled Backup for UM
KX-NSU003
Back up UM Message data as scheduled
Function
Activation Key
Note
2Way recording and
transfer
KX-NSU3XX
Record current conversion to own mail box or other subscribers
Mailbox by One touch Key
Function
Activation Key
Note
Microsoft outlook/IMAP
Integration
KX-NSU2XX
UM notification .　

50. 5. Required Activation Key
Required Activation Key for each function
4 ) Network Function Related
Function
Activation Key
Note
One Look Networking
KX-NSN001
Activate One Look Networking over IP
Function
Activation Key
Note
Q-Sig Enhanced Features
KX-NSN002
Activate limited One Look networking function using Q-SIG
Function
Activation Key
Note
Network DSS function
KX-NSN002
Activate DSS function over Q-Sig network
Function
Activation Key
Note
Centralized VM Function
KX-NSN002
Activate Centralized VM Function over Q-Sig network
Function
Activation Key
Note
PS Roaming by Network
ICD Group
KX-NSE1XX
Activate PS roaming function for ICD group member over Q-Sig .　

51. Appendix (Keep adding)
Note and Caution

52. Note and Caution Note 60 Days free Activation Key
After install System, user must activate Free Trial by Web –Programming. 60 days counter start right after activate Free Trial System will notify expiration date once by 10days before expiration date.
2) Web Programming Access control (Only for Russian Market）
For Russian Market, NS1000 provide Web Programming Access control function for authorized dealer. It will be provided as Trail Activation Key and it expire after 6months
3) USB Back Up
Activation Key file can be backed up to USB Memory only
4) Delete Activation Key
　　When delete Activation Key from System, The Status of Activation Key will not be updated until System Reset .　

53. Note and Caution Caution
Can not transfer Activation Key for NCP/TDE to NS1000
System support Activation Key Back up function to USB Memory, but Pre-installed and temporally Activation Key will not be saved to USB Memory.
If fail Activation key transfer operation to NS1000 because of Network error etc,　System will display Caution to Web Programming screen such as `Can not transfer Activation Key to System, please back up Activation Key to PC`
The activation key file can only be installed to PBX with MPR-ID, so Backed up activation key can be installed original MPR .　

54. Thank you ! The END

55. Modification 20120130-01 4.0_ActivationKey_Rev1_30Jan2012.ppt
- 1st release
_ActivationKey_Rev12_Feb2023.ppt
- Modify Page#9
Delete 2Way Recording user from Distribution. It is mistake
- Add Page#28
Add how to install the Activation keys.
- Modify Page#33
Add the explanation about Activation Key for the Master unit.
_ActivationKey_Rev13_APR2704.ppt
- Modify Page#19
Change word Licence to Activation Key
- Modify Page#20
- Modify Page#8,33
Change word CTI License to CTI Interface
_ActivationKey_Rev14_19Jan2016.ppt
- Add Page#38