1. Kinetic Theory of Matter
Matter is made up of particles which are in continual random motion.

2. SOLIDS LIQUID GAS
Particles of solids are tightly packed, vibrating about a fixed position.
Solids have a definite shape and a definite volume.
Particles of liquids are tightly packed, but are far enough apart to slide over one another.
Liquids have an indefinite shape and a definite volume.
Particles of gases are very energetic and moving constantly.
Gases have an indefinite shape and a indefinite volume.

3. There is actually 4 STATES OF MATTER PLASMA
Plasma is an ionized gas.
Plasmas, like gases have an indefinite shape and an indefinite volume.
Plasma is the most common state of matter!

4. STATES OF MATTER LIQUID PLASMA SOLID GAS
Tightly packed, in a regular pattern
Vibrate, but do not move from place to place
Close together with no regular arrangement.
Vibrate, move about, and slide past each other
Will separated with no regular arrangement.
Vibrate and move freely at high speeds
Has no definite volume or shape and is composed of electrical charged particles

5. Heating and Cooling Curves and Phase Diagrams Things to know: What do all the lines represent? Where are the phase changes and what are their names? Is energy being absorbed or released?

6. Heating Curve for Water
This is what the graph would look like if I took some ice cubes, put them in a beaker, and heated them with a Bunsen burner.
What do you notice?

7. Heating Curve for Water
What is happening between point B and C?
What is happening between point D and E?
Is energy being absorbed or released?

8. Heating Curve for Water
Gas
EVAPORATING
Liquid
MELTING
Solid
While the water is in a particular state, the temperature can increase.
During a phase change however, the temperature remains constant.

9. Cooling Curve of Water A B C D
Blank
What is the phase change between A and B?
What is the phase change between C and D?
Is energy being absorbed or released?

10. Learning Check A. Water condenses at a temperature of
1) 0°C 2) 50°C 3) 100°C
B. When a gas condenses, energy is
1) released 2) absorbed
C. Melting is
1) endothermic 2) exothermic

11. Learning Check ____A. Ice to liquid water ____B. Water vapor to rain
Is energy absorbed (1) or released (2) in each of the following:
____A. Ice to liquid water
____B. Water vapor to rain
____C. Boiling water
Something to think about: Why do drops of liquid water form the outside a glass of iced tea when the liquid is on the inside?

12. Solution CS3
Is energy absorbed (1) or released (2) in each of the following:
_1__A. Ice to liquid water (Endothermic)
_2__B. Water vapor to rain (Exothermic)
_1__C. Boiling Water (Endothermic)
Condensation of water in the air that cools

13. PHASE CHANGES Solid to liquid Melting
Description of Phase Change
Term for Phase Change
Heat Movement During
Phase Change
Solid to liquid
Melting
Energy (Heat) is absorbed by atoms.
Liquid to solid
Freezing
Energy (Heat) is released by atoms.

14. PHASE CHANGES Energy (Heat) is absorbed by atoms. Liquid to Gas
Description of Phase Change
Term for Phase Change
Heat Movement During
Phase Change
Liquid to Gas
Evaporation/ Vaporization
Energy (Heat) is absorbed by atoms.
Gas to Liquid
Condensation
Energy (Heat) is released by atoms.

15. PHASE CHANGES Energy (Heat) is absorbed by atoms. Solid to Gas
Description of Phase Change
Term for Phase Change
Heat Movement During
Phase Change
Solid to Gas
Sublimation
Energy (Heat) is absorbed by atoms.
Gas to Solid
Deposition
Energy (Heat) is released by atoms.

16. A phase diagram can represents the various phases of compounds and the conditions (variables) that must exist for the compound to exist in the specific phases.
What are the variables on each axis?
Phase Diagrams

17. Each black line represents the conditions when a phase change occurs.

18. Triple Point – point that exist when all three states of matter are present at the same time
Critical Point – point on a phase diagram where the liquid phase has the same density as the gas phase and are indistinguishable.
No matter what pressure or temperature is applied, it will always be a gas.

19. At what temperature will this substance freeze?
You can identify the boiling and freezing point of a substance by looking at the 1 atm pressure and drawing a line.
At what temperature will this substance freeze?
At what substance will this substance boil?