1. From: Additive Manufacturing of Glass
Date of download: 11/1/2017
Copyright © ASME. All rights reserved.
From: Additive Manufacturing of Glass
J. Manuf. Sci. Eng. 2014;136(6): doi: /
Figure Legend:
Illustration of powder bed SLM setup

2. From: Additive Manufacturing of Glass
Date of download: 11/1/2017
Copyright © ASME. All rights reserved.
From: Additive Manufacturing of Glass
J. Manuf. Sci. Eng. 2014;136(6): doi: /
Figure Legend:
Experimental results showing particle diameter as a function of exposure duration and laser power. The image in the inset shows the result for P = 10 W and τ = 1 s.

3. From: Additive Manufacturing of Glass
Date of download: 11/1/2017
Copyright © ASME. All rights reserved.
From: Additive Manufacturing of Glass
J. Manuf. Sci. Eng. 2014;136(6): doi: /
Figure Legend:
Particle diameter as a function of exposure duration and laser power from simulation

4. From: Additive Manufacturing of Glass
Date of download: 11/1/2017
Copyright © ASME. All rights reserved.
From: Additive Manufacturing of Glass
J. Manuf. Sci. Eng. 2014;136(6): doi: /
Figure Legend:
Shape distribution of tracks: (a) beam size 70 μm; (b) beam size 200 μm; (c) beam size 350 μm; and (d) photographs of different track regimes

5. From: Additive Manufacturing of Glass
Date of download: 11/1/2017
Copyright © ASME. All rights reserved.
From: Additive Manufacturing of Glass
J. Manuf. Sci. Eng. 2014;136(6): doi: /
Figure Legend:
Continuous line width distribution. White, gray, and black correspond to a beam sizes of 70 μm, 200 μm, and 350 μm, respectively.

6. From: Additive Manufacturing of Glass
Date of download: 11/1/2017
Copyright © ASME. All rights reserved.
From: Additive Manufacturing of Glass
J. Manuf. Sci. Eng. 2014;136(6): doi: /
Figure Legend:
Simulated results of single track scanning showing with inset showing temperature distribution in the powder bed

7. From: Additive Manufacturing of Glass
Date of download: 11/1/2017
Copyright © ASME. All rights reserved.
From: Additive Manufacturing of Glass
J. Manuf. Sci. Eng. 2014;136(6): doi: /
Figure Legend:
Wall built using powder bed process (a) 1 mm layer thickness, (b) 0.5 mm layer thickness, and (c) side view of 0.5 mm parts. Photographs are as deposited while insets show a portion of the same parts after cutting and polishing. The arrows indicate the build direction.

8. From: Additive Manufacturing of Glass
Date of download: 11/1/2017
Copyright © ASME. All rights reserved.
From: Additive Manufacturing of Glass
J. Manuf. Sci. Eng. 2014;136(6): doi: /
Figure Legend:
(a) Illustration of wire-fed process and photographs of part, (b) as deposited, and (c) after cutting and polishing

9. From: Additive Manufacturing of Glass
Date of download: 11/1/2017
Copyright © ASME. All rights reserved.
From: Additive Manufacturing of Glass
J. Manuf. Sci. Eng. 2014;136(6): doi: /
Figure Legend:
Micrographs of polished surfaces (a) powder bed part shown with 1 mm layer thickness and (b) wire fed part