Presentation is loading. Please wait.

Presentation is loading. Please wait.

Restorative dentistry and Pulp health

Similar presentations


Presentation on theme: "Restorative dentistry and Pulp health"— Presentation transcript:

1 Restorative dentistry and Pulp health
Dr.Balsam M.Mirdan

2 Pulp The dental pulp occupies the pulp cavity in the tooth. Each pulp organ is circumscribed by the dentin and is lined peripherally by a cellular layer of odontoblasts adjacent to the dentin The dental pulp comprises nerves, arteries, veins, lymph channels, connective tissue cells, intercellular substance, odontoblasts, fibroblasts, macrophages, collagen, and fine fibers. The central area of the pulp contains the large blood vessels and nerve trunks. The pulp is circumscribed peripherally by a specialized odontogenic area composed of the odontoblasts, the cell-free zone, and the cell-rich zone.

3

4 Effect of operative procedures of pulp
Effect of Operative Procedures on the Pulp: The commonly used Operative procedures endanger the pulp more than the disease process. Pulp inflammation for which the dentist's own procedures are responsible may well be designated as (dentistogenic pulpitis), dentist induced pulpitis.

5 Effect of Local Anaesthesia
Vasoconstrictors of LA potentiate and prolong anesthetic effect by reducing blood flow in the area. Reduction in blood [low during a restorative procedure could lead to an increase in the concentration of irritants accumulating within the pulp].

6 information Ahmed Al-Kahtani 2013
the use of long acting local anesthetic can significantly reduce the postoperative pain in teeth with irreversible pulpitis. Using bupivacaine will cause less pain when used for long periods compared to lidocaine when used in the early postoperative periods after treatment of the root canal. Ahmed Al-Kahtani 2013 Local anesthetics, especially with vasoconstrictors reduce neuropeptides(SP) levels in the pulp, thereby reducing the pulpal blood flow leading to autophagy or ischemic necrosis. Ashok Kumar2016 information

7 The Effect during Cutting Procedures
Pulp trauma results when the pulp is closely approached or the dentine is extensively removed in all type of preparation in teeth, for amalgam, composite, inlay, crowned and bridge preparation. Over cutting cavity preparation whether or not the pulp exposure is one of the greatest damage to the pulp. A full crown preparation damages every single coronal odontoblast. So the depth of cavity affects the pulp as well as the width of the cavity also of the same importance.

8 The immediate reaction of the pulp when cutting dentine is the disturbance of the odontoblasts cells beneath the cut tubules of the cavity, also the stripping of the odontoblast layer from predentine this will be followed by the establishment of acute inflammatory reaction. Usually, it will resolve into a repair process with subsequent reparative dentine formation. This will depend on many factors:

9 The deeper the cavity the more the damage to the pulp
The severity of the irritation to the pulp from dental caries increases as the caries advances pulpwards. The relatively low level of irritation initially leads to a mild inflammatory response in which there is diffuse infiltration beneath the odontoblasts by a few mononuclear inflammatory cells, principally lymphocytes and macrophages, responding to antigenic products from bacteria and the carious dentine

10

11

12 2/ Speed of rotation Speed of rotation, depend on whether there is water cooling or not, the more speed the more the damage unless water cooling is effective. Speeds between 3000 rpm to rpm are more damaging to the pulp if used without cooling

13 Odontoblastic nuclei with modificated axis and tendency of displacement towards dentinal tubules
(HE, ×400) Disrupted odontoblastic layer presenting vacuolation and a slight vasodilatation of the arterioles (Szekelly, ×200)

14 3/ Frictional heat the production of heat within the pulp is the most severe stress that restorative procedures impart on the pulp Amount of heat produced depends on speed of rotation size and Shape of the cutting instrument length of time in contact with dentin amount of pressure exerted on hand piece and if water-air spray is used. A water coolant is more efficient in lowering the temperature than an air coolant. For the water to be effective it must have sufficient pressure to penetrate the area of turbulence and should be delivered directly at the point of contact between the bur and the tooth.

15 Conclusions 1. The dental pulp shows structural changes, especially in the odontoblastic zone, its reactivity being correlated with the depth and the technique of preparation. 2. In spite of all technical progresses in modern dentistry, there is no harmless, completely non traumatic technique for the crown preparation. Histological changes in the underlying pulp occur anyway and are difficult to avoid as long as the crown preparation is performed at high speed, even if an adequate water cooling system is used. 3. Pulpal complications involving inflammation, degradation and necrosis are the result of a series of traumatic external injuries. So, it is the responsibility of the restorative dentist to minimize the trauma to dentin and pulp during all clinical procedures, especially in the tooth preparation phase.

16 -Temp raised 10 degrees above ambient temp; cell death occurs.
-“Blushing” of teeth during or after cavity or crown preparation is attributed to frictional heat a -Pink or purple color due to vascular stasis of sub odontoblastic capillary plexus blood flow which ruptures and release RBC’s

17 d- Rebound response due to vibration, increase in speed of rotation not only increase heat production but there is also an increase in vibration which affect the pulp, these vibration movement affect odontoblast cells and may cause displacement of these cells on the other side of the pulp. e- Extensiveness of preparation, the pulp damage is roughly proportional to the amount of tooth structure removed. f-The use of pins, the insertion of pins introducing the hazards of dental fractures or unnoticed pulp exposure or perforation through periodontal ligaments, also the cementation of pins with an irritant material cause more damage in the pulp. g- Nature of cutting instrument and hand instruments, produce pressure upon manipulation during cavity or crown preparation. h- Drying of dentine, drying of cut dentin. with a jet of air produces a rapid outward movement of fluid through the dentinal tubules. Not only does this stimulate sensory nerve fibers (pain), this fluid movement may “draw” odontoblasts up into the tubules resulting in cell death.

18 the effect during lining procedures
Materials in general used in dentistry, various filling materials produce some irritation as chemical toxicity, acidity, absorption of water during setting. In deep cavities non irritant lining materials should be used such as Ca(OH)2 or ZOE.

19 The Effect during Filling Procedures
A- Correct placement of band retainer and wedge. b- Correct insertion of the materials to avoid micro leakage and the development of secondary caries. c- Correct carving of the material to produce the missing part of the tooth and to prevent high spot. D- Polishing of the restoration should be done and to avoid heat generation. Polishing of teeth with rubber cup and polishing of amalgam with pumice will produce heat if exceeds the speed and time, so water should be directed to the tooth to prevent damage due to heat. e- When irritant filling materials is used such as composite a good lining to be placed.

20

21 The Effect After Restoration
(Accumulative Effect) It should be realized that the pulp sustain damage, when involved with caries and also during the operative procedures, and may sustain further damage in the pulp after restoration which could be irreversible and it will progress to involve the whole pulp. This could give rise to painful symptoms or may proceed without causing any problem to the patient.

22 Irradiation Irritants to Pulp:
The pulps of human teeth are affected in patients who are exposed to deep radiation therapy for malignant growth in oral cavity and neck region. In time the odontoblasts and other pulp cells become necrotic. The salivary glands affected resulting in decreasing of salivary flow. Radiation causes pulp involvement which should be endodontically treated, extraction of teeth may cause radio-necrosis of involved bone. Radium is found in human dental tissue for many years after medical occupational exposed.

23

24

25 Clinically Importance Features of the Dental Pulp
****. With age the pulp becomes less cellular. The number of cells in the dental pulp decreases as cell death occurs with age, **** The volume of the pulp chamber with continued deposition of dentine. In older teeth, the pulp chamber decreases in size; in some cases the pulp chamber can be obliterated. ’****' An increase in calciflcation in the pulp occurs with age, ***** With advancing age, the pulp becomes more fibrous and may contain pulp stones which may be concentric attached to the pulp cavity wall or tree in the mass of pulp tissue.

26

27


Download ppt "Restorative dentistry and Pulp health"

Similar presentations


Ads by Google