1. Assembly procedure – Inner Region

2. Assembly procedure – Inner Region
Reminder : 1 2 3 4 5 6
From « Integration status and open issues» of 22/06/11 by M. Jore

3. Assembly procedure – Inner Region
Level 1 (1st assembly)
SIT
FTD 3 at 7
Inner Support Structure

4. Assembly procedure – Inner Region
Level 1
FTD 3 at 7 fixed and located on ISS (external mounting)
FTD 3 at 7
Inner Support Structure
Mechanical support (in red)

5. Assembly procedure – Inner Region
Level 1
« Supporting wheels » fixed and located on the ISS
For the SIT (half part)
For the FTD 1&2
SIT
FTD 1 & 2
Inner Support Structure
Mechanical support (in yellow)

6. Assembly procedure – Inner Region
Level 2
Vertex clamped around the Beam pipe
To need a tools and a special support
VTX
Beam pipe

7. Assembly procedure – Inner Region
Level 2
Cables fixed on the Beam pipe
With a clamp in « Epoxy »
Cables (in red)
Beam pipe
Clamp in Epoxy

8. Assembly procedure – Inner Region
Level 3
Beam pipe with VTX assembled and located on the 1st assembly
By cables or « striplines » or « tie rod » on the ISS

9. Assembly procedure – Inner Region
Level 4
Close the FTD 1 & 2
Located and fixed between half part
Cables ?
FTD 1 & 2

10. Assembly procedure – Inner Region
Level 5
Close the SIT (inner and outer)
« Supporting wheels »
Maybe FTD 3 ? Interactions with SIT ?
Cables ?
Cooling ?
FTD 3

11. Assembly procedure – Inner Region
Level 6
Close the FTD 3 at 7 with ISS (same process)
FTD fixed on the ISS ? (or not to see level 7)
Cables ?

12. Assembly procedure – Inner Region
Level 7
Close the ISS
Fixed beam pipe on the ISS ( to see level 3)
Measures and controls

13. Assembly procedure – Inner Region
Conclusion
Need informations :
For SIT
For FTD1&2
For the cooling
Assembly procedure :
Laser alignment
Different support for the mounting
A support to handle the beam pipe