1. Chapter 14 Honors Chemistry
Gases
Chapter 14
Honors Chemistry

2. Section 1 – The Gas Laws
1. Kinetic Theory
The kinetic molecular theory assumes the following concepts about gases are true:
Gas particles do not attract or repel each other
Gas particles are much smaller than the distance between them
Gas particles are in constant, random motion
No kinetic energy is lost when gas particles collide with each other or with the walls of their container
All gases have the same kinetic energy at a given temperature
Actual gases do not obey all these assumptions.
But for many, their behavior approximates the behavior assumed by the kinetic theory

3. 2. Boyle’s Law
Boyle’s law states that the volume of a fixed amount of gas held at a constant temperature varies inversely with the pressure.
P1V1 = P2V2
Where P = pressure and V = volume

4. 3. Charles’s Law
As temperature increases, so does the volume of gas when the amount of gas and pressure do not change.
Kinetic-molecular theory explains this property
At a higher temperature, gas particles move faster, striking each other and the walls of their container more frequently
Temperature must be expressed in kelvin.
Absolute zero is zero on the Kelvin scale.
Charles’s law states that the volume of a given amount of gas is directly proportional to its kelvin temperature at constant pressure.

5. 4. Gay-Lussac’s Law
Gay-Lussac’s law states that the pressure of a fixed amount of gas varies directly with the kelvin temperature when the volume remains constant.

6. End of Section 1

7. Section 2 – The Combined Gas Law & Avogadro’s Principle
The combined gas law states the relationship among pressure, temperature, and volume of a fixed amount of gas.

8. 6. Avogadro's Principle
Avogadro’s principle states that equal volumes of gases at the same temperature and pressure contain equal numbers of particles.
Therefore, as the number of moles increase so does the volume
V1/n1 = V2/n2
Molar volume of a gas is the volume 1 mol occupies at 0.00°C and 1.00 atm of pressure.
0.00°C and 1.00 atm are called standard temperature and pressure (STP).
At STP, 1 mol of gas occupies 22.4 L. (22.4 L/mol)

9. End of Section 2

10. Section 3 – The Ideal Gas Law
Ideal gas law combines, Boyle’s Law, Charles’s Law, Gay- Lussac’s Law, and Avogadro’s Law to describe the relationship between pressure, temperature, volume, and number of moles:
For a specific sample of gas, the relationship of pressure, volume, and temperature is always the same. You could say that:
Where the constant (k) is based on the amount of gas (number of moles) present, n, therefore:
k = nR
Where R represents an experimentally determined constant that is referred to as the ideal gas constant.

11. The Ideal Gas Law (cont.)
The Ideal Gas Constant
The ideal gas constant is represented by R and is L•atm/mol•K when pressure is in atmospheres.
The value of R depends on the units used for pressure
Therefore the ideal gas law is:
The ideal gas law describes the physical behavior of an ideal gas in terms of pressure, volume, temperature, and amount of moles of gas present.

12. The Ideal Gas Law (cont.)
Real Versus Ideal Gases
Real gases deviate most from ideal gases at high pressures and low temperatures.
As the amount of space between particles and the speed at which the particles move decrease, the effects of the volume of gas particles and intermolecular forces become increasingly important
Condensation occurs to form a liquid
Polar molecules have larger attractive forces between particles.
Polar gases do not behave as ideal gases.
Large nonpolar gas particles occupy more space and deviate more from ideal gases than smaller gas particles.

13. 8. Applying The Ideal Gas Law
Molar mass (M) and density (D) can be calculated if the mass of the sample is known
Molar mass and the ideal gas law
Density and the ideal gas law

14. End of Section 3

15. 9. Calculations Involving only Volume
Section 4 – Gas Stoichiometry
9. Calculations Involving only Volume
The gas laws can be applied to calculate the stoichiometry of reactions in which gases are reactants or products.
2H2(g) + O2(g) → 2H2O(g)
2 mol H2 reacts with 1 mol O2 to produce 2 mol water vapor.
Avogadro’s principle states that equal volumes of gases at the same temperature and pressure contain equal numbers of particles, therefore, the coefficients also represent relative volumes
2 L of H2 reacts with 1 L of O2 to produce 2 L of water vapor

16. Calculations Involving only Volume (cont.)
You must know the balanced chemical equation for the reaction and the volume of at least one other gas involved in the reaction
Coefficients in a balanced equation represent volume ratios for gases.
The same as for mol ratios
Temperature and pressure conditions are not needed because after mixing each gas is at the same temperature and pressure

17. 10. Calculations Involving Volume and Mass
You must know the balanced equation, at least one mass or volume for a reactant or product, and the conditions under which the gas volumes have been measured.
Then the ideal gas law can be used along with volume or mole ratios to complete the calculation.
Masses given must be found by converting to moles or volumes before being used.
Temperature units must be in kelvin.

18. End of Section 4

19. Click on an image to enlarge.
IB Menu
Click on an image to enlarge.

20. IB 1

21. IB 2

22. IB 3

23. IB 4

24. IB 5

25. IB 6

26. IB 7

27. IB 8

28. IB 9

29. IB 10

30. IB 11

31. IB 12

32. IB 13

33. IB 14

34. IB 15

35. IB 16

36. IB 17

37. IB 18

38. IB 19

39. IB 20

40. CIM Table 12.4 Unit Cells Table 12.5 Types of Crystalline Solids
Figure Phase Diagrams

41. Help
Click any of the background top tabs to display the respective folder.
Within the Chapter Outline, clicking a section tab on the right side of the screen will bring you to the first slide in each respective section.
Simple navigation buttons will allow you to progress to the next slide or the previous slide.
The Chapter Resources Menu will allow you to access chapter specific resources from the Chapter Menu or any Chapter Outline slide. From within any feature, click the Resources tab to return to this slide.
The “Return” button will allow you to return to the slide that you were viewing when you clicked either the Resources or Help tab.
To exit the presentation, click the Exit button on the Chapter Menu slide or hit Escape [Esc] on your keyboards while viewing any Chapter Outline slide.

42. This slide is intentionally blank.
End of Custom Shows
This slide is intentionally blank.