1. ME72 13-14 Contest Structure Plan View 131016 4.0 dia. orange circle
1.0 dia. white circle
Removable 2x4 lumber rails (4) attached with bolts to ramps
36.0
36.0
Notes:
2x4 nominal lumber actually measures 1-1/2 x 3-1/2 inches in cross section
Typ. means typical
Dimensions in inches
Safety netting in this area between ramps and rail, strung from bottom surface of ramp stiffeners (4 places)
ME Contest Structure
Plan View

2. ME72 13-14 Contest Structure Side View 131016 ¾ plywood typ.
Access hole for bolts each face of vertical central structure
36.0 typ.
18.0 typ.
Ramp rest support permanently attached to center structure (4 places)
60.0 typ.
12.0 typ.
24.0
typ.
2x4 lumber typ.
60.0 typ.
8.5
21.0 typ.
Removable ramps attached to vert.
structure with pairs of bolts and
T-nuts (4 places)
42.0 typ.
ME Contest Structure
Side View
Safety netting in 4 areas between ramps and rail, strung from bottom surface of ramp stiffeners and top of rail as shown by red arrows

3. Smooth Ramp (2 required)
78.0
24.0
6.0 typ. 13 places
1.5 typ.
2.6
Cleat Ramp (2 required)
131016
2x6 lumber typ.
1.5 x 1.5 x 24 typ. 14 places
24.0
1.5 typ.
Top surface covered with 0.024”
galvanized steel sheeting
ME Contest Structure Ramps
Smooth Ramp (2 required)
131016