2. 5LNC - background information
Annex 11, Chapter 2, Appendix 2
Designators for significant points not marked by the site of a radio navigation aid
1960’s – ICAO codes
APAC
EUR/NAT
MID
WACAF
SAM
NACC
ESAF OCT NOV 1985

3. 5LNC - codes dispatch

4. 5lnc – Traditional Registration

5. 5LNC - Need for dynamic change
ICARD designed to
Meet requirements set in Annex 11, Chapter 2
(2.14) - Appendix 2
Ensure unique designators allocations (ICAO Strategic Objective A)
Enhance 5LNCs management worldwide (ICAO Strategic Objective D)

6. A web based system since 1998
5LNC on-line registration
A web based system since 1998

7. ICARD for all Accessing ICARD : www.eurocontrol.int/icard/
The main ICARD menu gives information on the different services and database that Eurocontrol is providing to ICAO and for the aviation community

8. ICARD web page
Access to ICARD is open to anyone for information
Guidelines for registration are provided on the same page
To note:
The future ICARD authorised user will initially register on the eurocontrol « onesky on-line »
ATS route planners are nominated by their Administration
Names of the designated route planners are communicated to the ICAO Regional Office accredited to them
After coordination between State/ICAO/Eurocontrol, access as icard authorised user will be granted

9. ICARD for Authorised Users
Access as ICARD Authorised users
To note:
login and password are granted on an individual basis
update to profile will be made by the authorised user
change in the representation of route planners should be notified to the ICARD data manager

10. ICARD- Authorised user menu
Find Allocated and available 5LNC
verify the existence of a code in the ICARD database
Identify the state using the code or indicate its availability in a specific region.
To note:
The information covers all ICAO regions & transfer of codes is possible
ICARD contains all codes created in the 1960s but also a certain amount of codes which were not coordinated with ICAO – these are flagged as « non-icao » codes
Find 5LNC in Reserve List :
enable the authorised user to search for a new 5LNC and post a request for allocation
Find Allocated 5LNC :
find an information (allocation, geographical coordinates..)
amendment can be requested by the coordinating country (update, deletion)
4. Check my request:
The requests found in this menu are still pending – not yet approved by the ICAO data manager
the authorised user can make all modification or withdraw the requests which are still pending for confirmation
5. Requests by block :
Not recommended – will be withdrawn
6. Downloads
ICARD can generate
List of codes by country
List by name of codes
List of duplicates per country
List of duplicateds per code
7. List ICARD Contacts + List Country code indicators
Provide information on counterparts in other states or regions
List the ITU, ISO2, ISO3 country codes
8. Change password

11. Search for existing code
Searching the existence or the details of a 5LNC typing the code name
Wil immediately give the information of the state user and the 5LNC details as initially registered in the database

12. Search codes with specific pattern
From a « search criteria »,
the authorised user can obtain a selection of codes with specific patterns, replacing letters with asterisks
To note :
the results will show a global information : available codes belonging to the region of registry will be underlined
codes underlined are active codes – available for allocation

13. Search from geographical position
From given coordinates, the « map » option will show the future code position and give a visual information of other existing codes in the required area
To note :
All options in the first menu « find allocated and available 5LNC » are also available to public users
to facilitate « in-house » coordination for future planification
to simplify correspondence between data managers and authorised user

14. Posting a request - 1st option
From reserve list
1- type-in given code
2-Select Search
3-code is underlined (active) – click and proceed with request
In order to post a request for allocation 4 options are available to select a 5LNC from the « reserve list »:
3 options from « search criteria »
1- search for  = adoma or a**ma or *do** : used if specific letters are needed
2- sound like : adoma – can be used to find a code similar to one already used in another region
3- excluding letter A, X, ..
to note: with options 1, 2 and 3, the authorised user will need to verify the sounding like proximity before finalising the request

15. Posting a request – 2nd option
From reserve list
1- type-in preference
2-click « Search »
3-select one of the blue code and proceed with request
The results provided with this « sound-like » search option propose a list of available codes.
To note: code shown in yellow are pending for approval- all others are active (shown underlined)

16. Posting a request – 3rd option
From reserve list
1- type-in preference, if any
2- and/or excluding letters
3-click « Search »
Some letters are pronounced differently to (o, l, r, ..) or not used at all in some parts of the world.
This option, excluding letters, offers a more adequate selection of codes to the satisfaction of all users
4-select and procee with request

17. Mandatory 1 - Coordinates
It is no more possible to reserve codes without coordinates.
For planification purposes, provisional coordinates can be added but notified to the data manager
Allocation without coordinates is not authorised

18. Mandatory 2 – proximity search
To finalise a request for allocation, the proximity search with « map » and « list » functions is mandatory and remains the authorised user’s responsibility
To proceed with the request for code allocation,
The authorised route planner has the obligation to enter the coordinates – even if they are provisional.
The indication of the purpose will be helpful for future information
The comment box is useful for both authorised user and data manager– for background information, date of implementation, route, date of publication, any additional information that the data manager will need to approve the request, ie for future amendment when coordinates are provisional..
To note :
amendment to coordinates will only be accepted by the datamanager if the code is not yet published
Checking sounding like proximity is mandatory and remains the responsibility of the authorised user : the data manager will not approve the request if this action is not completed and ticked
If the requested code is shared (positioned on a FIR boundary for example, the requestor can add the other state concerned – the final message of confirmation issued by the data manager will automatically be sent to all parties concerned.
It is assumed that coordination with the other party has been made initially. If not, the other party can request a change upon reception of the confirmation received through ICARD.
request on behalf of a state can only be made by the icard data manager

19. Proximity check with listing
The authorised user is made aware of the sounding like proximity.
Another selection will then be required
Note: 500NM is the radius currently determined as safe for a sounding like proximity
The option « list » sounding like proximity was designed to quickly and safely verify all codes in the vicinity of the future code.
The authorised user will check and confirm that his new code is clear of phonetic resemblance within a radius of 500NM

20. Proximity check with map view
With the map function , the future 5LNC is identified with a blue label. Similar codes within a close proximity are highlighted in red
Checking the map function will also show the proximity of sounding like codes
To note:
the data system was designed to mark in red those codes already in existence and which are phonetically too close .
The authorised user will also be advised with a prompt when proceeding with the request.

21. Reminding Safety issues
Warnings are prompted to draw the authorised user’s attention on the necessity to modify the request.
An automatic prompt will inform the authorised user of the necessity to check proximity and confirm that action was done
Also when other similar codes are found within a close proximity, a warning will also be prompted.

22. Posting a 5LNC request – recommended option
From reserve list : random search from given coordinates
1- no need for specific pattern
2- known coordinates
3- click « search » for random
In order to post a request for allocation and ensure that proximity checks is ensured, a fourth option is offered with the
« random selection search ». From known coordinates, a list of 30 codes is automatically generated taking account of the sounding like proximity
4- a list of 30 codes with proximity check done is automatically generated
5- request for allocation can be finalised

23. Check my request Possible modifications for pending requests
At this stage, requests are still pending and can be modified or deleted by the authorised user

24. On-line Downloads

25. Information on duplicates
Requests and ICARD action are registered on-line and reflected on all downloads
Downloads are provided for follow-up action

26. A milestone for ICARD 2010 = ICARD Global Our next challenge
SAM and NACC now on board
AFI next and last ICAO region
ICARD soon ready for
a unique database
a greater choice of codes
possibilities to safely create new 5LNCs
Our next challenge
Global coordination
5LNC update
Clearing duplicates

27. Thank you for your attention !
Gracias
Thank you for your attention !
Nikki Goldschmid 林 琪 妮
ICAO EUR/NAT Paris - ICARD data manager
Tel:  +33 (0)