1. Date of download: 11/3/2017
Copyright © ASME. All rights reserved.
From: Results Using Processed Acetylene Fuel Stream in Solid Oxide Fuel Cell Stack
J. Fuel Cell Sci. Technol. 2010;7(3): doi: /
Figure Legend:
IV and power density plot for steady state, single cell performance; anode feed: 1.08 L min−1C2H2, 10 L min−1H2, and 5.3 g min−1H2O; cathode feed: 50 wt % with H2O2 feed of 27 g min−1

2. Date of download: 11/3/2017
Copyright © ASME. All rights reserved.
From: Results Using Processed Acetylene Fuel Stream in Solid Oxide Fuel Cell Stack
J. Fuel Cell Sci. Technol. 2010;7(3): doi: /
Figure Legend:
Fuel processor performance at various hydrogen feed flow rates (10 L min−1, 5 L min−1, and 3 L min−1). Three data points were collected at each H2 flow rate to monitor the mole fraction of carbon species and the overall carbon balance. Hydrogen makes up the dry reformate gas balance.

3. Date of download: 11/3/2017
Copyright © ASME. All rights reserved.
From: Results Using Processed Acetylene Fuel Stream in Solid Oxide Fuel Cell Stack
J. Fuel Cell Sci. Technol. 2010;7(3): doi: /
Figure Legend:
Diagram of the experimental setup for the two-step fuel processor