1. Job Performance Requirement 7-8
Full Escape Procedure

2. will allow the firefighter increased freedom of
A While lying to the side, the firefighter will have to loosen the shoulder straps and remove the waist belt of the SCBA. The firefighter should next “roll” out of the pack by rolling over to the left. Going to the left
will allow the firefighter increased freedom of
movement.

3. B To further facilitate freedom of movement, the SCBA should be rotated so that the cylinder valve is facing away from the firefighter. All straps will need to be placed in a neat organized manner on top of the SCBA to facilitate an easy redonning.

4. C The firefighter should then move with the SCBA in front but keeping it close to the body to protect it and prevent the face piece from being pulled off. The firefighter should never lose contact with the SCBA. It is imperative that the firefighter makes certain that no holes or elevation changes exist in the floor as the firefighter moves forward. When clear of the obstacle, the firefighter can redonn the SCBA by laying out the straps and rolling back into the pack.