1. Task 1.3 Pilot site surveys & audits TECNALIA J. Oyarzabal

2. Task 1.3: Pilot – Tecnalia

3. Task 1.3: Pilot – Tecnalia
Distributed Technologies laboratory used for:
Own R&D Activities
Power electronics control
PMUs
MicroGrid control
Hydrogen
Storage technologies
Electrical Vehicle communication protocols / charging …

4. Task 1.3: Pilot – Tecnalia
Distributed Technologies laboratory used for:
Third party equipment test
Inverter, power electronics
Advanced meters …
External R&D Activities
Custom
Visitors
Demonstrators

5. Task 1.3: Pilot – Tecnalia Components: Generation
3x50 kW Pacific power source
2x55 kW diesel gensets with inverter interface
1x50 kVA Turbine
3.6 kW (3), 0.6 kW, 1.6 kW (1) PV modules
6 kW (1) wind mill

6. Task 1.3: Pilot – Tecnalia Storage: Load 250kVA Flywheel
48V 2.8MJ (1) Ultracapacitor bank
48V-1925Ah Battery banks
24V-1120Ah Battery banks
Load
150kW, 55kW Resistive load bank
2x36kVA Reactive load bank
1x54kVA Capacitive load bank
Several other steps integrated into the connec. boards

7. Task 1.3: Pilot – Tecnalia Test boards
Source (mains, controlled…) connection cubicle
Resistive load banks
Inductive load banks
Capacitive load banks
Equipment under test
Electrical measure at each cubicle

8. Task 1.3: Pilot – Tecnalia

9. Task 1.3: Pilot – Tecnalia

10. Task 1.3: Pilot – Tecnalia Remote control: Generation Loads
Pacific power source => Programmable
Diesel gensets (inverter)
Built in low level ModBus over RS-485
Remote high level library (IEC / XML-RPC)
Loads
(almost all)
Built in low level ModBus over Ethernet (Beckhoff module)