1. BMET323 Students Guide -snaptutorial.com
For More Tutorials

2. BMET323 Students Guide -snaptutorial.com
BMET 323 Week 1 Homework Chapter 7
BMET 323 Week 1 Lab Requirement Annotation
Homework Chapter 7 BMET 323 Week 1
Compare and contrast the extravascular and intravascular methods of direct measurements of blood pressure
Describe how the oscillometric method of blood pressure work. Cite your source of information.
Week 1 Lab: Requirement Annotation
4.1 Use Simulation
1.Develop a LabVIEW program named simDataLogger.vi.
2.The program generates a simulated waveform of 10 Hz at 500 Hz sampling rate.

3. BMET323 Students Guide -snaptutorial.com
BMET 323 Week 2 Homework Problems
BMET 323 Week 3 Homework Problems
Chapter 7 Problems 6 & 7:
6. Design a notch filter that can remove a 60 Hz noise signal from an ECG signal.
Chapter 12 Problems 6:
6. Compare amplifiers (in terms of amplification, bandwidth, and noise requirements) in ECG, EEG, and EMG measurements.
End of Chapter 17 Quiz 5 and 7 (pp. 535–536)
5. The main characteristic of an FM modulated carrier is:
7. Name four bio-signals a bedside monitor is used to monitor:
End of Chapter 17 Problems 1, 8, and 9 (pp. 536–537)
1.Compute the distance

4. BMET323Students Guide -snaptutorial.com
BMET 323 Week 4 Homework
BMET 323 Week 5 Homework
BMET 323 Homeworks 4,5,6
 Homework 4:
2. For an ideal square-wave defibrillator, determine the energy delivered to the patient (see Figure 8-11).
3. Given a situation when a fully charged defibrillator capacitor
BMET 323 Week 5 Homework

5. BMET323 Students Guide -snaptutorial.com
BMET 323 Week 5 iLab Human Thermometer
BMET 323 Week 5 iLab
BMET 323 Week 5 iLab Human Thermometer
Purposes:
This lab requires that you use your circuit skills (aka trouble-shooting) to analyze what is happening, signal wise, in Figure 1 as a function of the control switches. Secondly, the Lab addresses IA’s , their uses and critical operational parameters.

6. BMET 323 Students Guide -snaptutorial.com
BMET 323 Week 6 Homework
BMET 323 Week 6 Homework
HW 6 – CH 10 4,6
· 4. List the types of sensors in the hemodialysis machine and their placement in the dialysis circuit.
6.List the main components of a dialysis machine on the dialysate side and on the blood side (at least five on each side).
HW 6 – CH 10 4,6
· 4. List the types of sensors in the hemodialysis machine and their placement in the dialysis circuit.
6.List the main components of a dialysis machine on the dialysate side and on the blood side (at least five on each side).

7. BMET323 Students Guide -snaptutorial.com
For More Tutorials