1. Nick Filice ME 143 Prof. Granda
Problem 16.1
Nick Filice
ME 143
Prof. Granda

2. Constructing the Model
First I constructed the base with an anchor.
Next I created the box and the wheels to scale.
Then I defined point elements at the correct locations according to problem 16.1

3. Joining the Elements
I held down the shift button and clicked two of the point elements the click on the JOIN button.

4. Locking the Wheels
I locked the wheels by applying a rigid joint to the wheels.
I did this by clicking the rigid joint icon and clicking the center of each wheel.

5. Applying the Frictional Properties and Measuring Charts
I clicked on each of the wheels changed the frictional force.
Then I clicked on the box and measured the P-V-A in the X direction.

6. The Van with its Frictional Forces

7. The Van at its Final Position (roughly 20 ft
The Van at its Final Position (roughly 20 ft. from where its brakes are applied.)