1. Paper (pallet) handling
BEFORE REMOVING THE MOISTURE-PROOF COVER
* ALLOW PAPER TO REACH AS CLOSE TO SURROUNDING AIR
TEMPERATURE AS POSSIBLE
* TAKE THE WRAPPINGS OFF JUST BEFORE PRINTING
* BANDS CAN BE TAKEN OFF BEFOREHAND AT THE TEMPERATURE
OF PRINTING ROOM
ROUGH QUIDE (O,55 M3 = 650 KG PAPER)
TEMPERATURE DIFFERENCE BETWEEN RECOVERY TIME
PAPER AND SURROUNDINGS HOURS
10 C (50 F) 15
20 C (68 F) 30
25 C (77 F) 50
30 C (86 F) 65

2. Paper (pallet) handling
Especially in periods of critical climate circumstances, printers are advised
to follow these guidelines:
Paper is not an efficient heat conductor, therefore allow for sufficient time to
let the paper adapt itself to the temperature in the workshop.
Do not open the paper wrapping until printing about to begin, the wrapping
protects the paper from fluctuations in temperature and humidity.
Infrared-drying, which drastically reduces the relative humidity of the paper
Should be used sparingly.
During drying, the paper should not be exposed to extremely low temperatures,
as this would significantly extend drying times.
- Avoid damaging the paper wrapping and carefully re-wrap remaining pallets.