1. Concept Ideas
Insert a scan of your range of concept ideas. These ideas might consist of both ‘safe’traditional style and contemporary ideas, as well as the ‘weird and wacky’ ones which might not necessarily be achievable in time. There is no specific requirement to annotate them unless you consider this to be useful.

2. Development of Design Proposal
On this page you should include the four concepts that you will take forward into development and explain why they have been taken forward.
Image of concept
Why is this concept being taken forward?

3. Developed Ideas Each design must have:
sketched assembly drawings, annotation on materials, material properties making it suitable, finishes, positives and negatives, refer to specification and spec. check box for each design
Each design must show how you intend to manufacture it! What techniques and processes you will use!
Each design must be numbered. You can also use Sketchup to create the ideas
Make sure you have annotated about all of these things
Specification points
Purpose
Aesthetics
Target market
Size
Ergo/ anthro
materials
Manu
Safety/ regs
Enviro
life cycle
Social
YOU MUST explain if each design meets what you have written in the specification. Use a spec check box (example on left) to tick them off if needed!

4. Design Ideas Each design must have:
sketch assembly drawings, annotate materials, material properties making it suitable, finishes, positives and negatives, refer to specification and spec check box for each design
Each design must show how you intend to manufacture it! What techniques and processes you will use!
Each design must be numbered. You can also use Sketchup to create the ideas
Make sure you have annotated about all of these things
Specification points
Purpose
Aesthetics
Target market
Size
Ergo/ anthro
materials
Manu
Safety/ regs
Enviro
life cycle
Social
YOU MUST explain if each design meets what you have written in the specification. Use a spec check box (example on left) to tick them off if needed!

5. Review of Design Ideas Design idea
User requirements- how well were they met or not met
Review against specification points
Positives
negatives
Sustainability
What to take forward when developing an idea
Areas to develop
Overall score /10
1 self review
This row is where you review design idea 1
1 client review
This row is where you ask your client to review design idea 1
2self review
2client review
3self review
3client review
4 self review
4 client review

6. Development of Chosen Design
Using a combination of sketching, 3D modelling and Sketchup you need to develop the different aspects and components for you product.
This should be over several pages and should see your product develop and change but not be completely redesigned.
You should get client feedback through, make scale models of the full product and/or full size components of the product to test their function and whether they would in situ/with other products.
ALL DECISIONS YOU MAKE AS YOU DEVELOP MUST BE FULLY EXPLAINED.
Client feedback
Next step of development

7. Development of Chosen Design
Using a combination of sketching, 3D modelling and Sketchup you need to develop the different aspects and components for you product.
This should be over several pages and should see your product develop and change but not be completely redesigned.
You should get client feedback through, make scale models of the full product and/or full size components of the product to test their function and whether they would in situ/with other products.
ALL DECISIONS YOU MAKE AS YOU DEVELOP MUST BE FULLY EXPLAINED.
Client feedback
Next step of development

8. Final Design It must be on SKETCH UP
You must show the product from different angles, show different components, different fixings/fittings.
You must annotate the design to explain each part. You must explain what you have changed from your development to help you achieve that design.
Manufacturing Specification
Performance requirement
Quality
Components
Form/ aesthetics
Dimension
Sustainability and product life-cycle
Processes
Material and components requirement
Scale of production
Construction techniques
Manufacturing/ tools

9. Orthographic Drawing Cutting List
You must have 3 views, front, side, top.
They must be to a scale 1:2 1:4
They should be done using CAD
Cutting List