1. By: The Crafty Jellyfish
Food Charm Series
III. Hot Dog
By: The Crafty Jellyfish

2. Food Charm Series III. Hot Dog You need: Dark Brown Polymer Clay
Red Polymer Clay
Tan Polymer Clay
Peach Polymer Clay
Yellow Polymer Clay
Wire Cutters
Eye Pin Wire

3. Step 1
Mix two parts peach clay and ½ part tan clay to make the color for the bun.
Not pictured here: Roll the color into a thick log. Use an Exacto knife or other cutter to make a large triangular slit in the side. Don’t cut all the way through!

4. Step 2
Mix two parts red and ½ part dark brown clay to make clay for the meat. Roll it into a medium sized log.

5. Roll the yellow into a long, thin log. Set it aside for now.
Step 3
Roll the yellow into a long, thin log. Set it aside for now.

6. Place the meat log into the bun. Center it.
Step 4
Place the meat log into the bun. Center it.

7. Step 5
Take the yellow and place it on the meat, folding it in a zig-zag. Cut to size and add the eye pin wire, add eyes too, if you want. You’re done! (Sorry about the shadow – at least it’s not covering the hot dog.)