1. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Asymmetrical factors of tail-up bending occurrence in rolling

2. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Layout of plate rolling and leveling

3. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Concept of plate leveling with a roller leveler

4. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Concept of roll gap: (a) δ < 0, (b) δ = 0, and (c) δ > 0

5. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Two roll configurations with 11 work rolls: (a) case 1 and (b) case 2

6. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Two-dimensional finite-element analysis model

7. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Configuration of mesh: (a) contact with upper punch and (b) contact with work roll

8. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Schematic diagram of leveling experiment with roller leveler and up-bending device

9. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Up-bending of plate by using an upper punch

10. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Simulation results of roller leveling for case 1: (a) upper punch moves down and plate tail is deformed and (b) plate tail contacts the first work roll

11. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Vertical displacement of the flat-plate simulation results for up-bending plate without plastic deformation and up-bent plate with plastic deformation: (a) vertical displacement before leveling and (b) vertical displacement after leveling

12. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Results of vertical displacement after leveling simulation: (a) entry roll gap = 11 mm and (b) entry roll gap = 10 mm

13. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
(a) Tail-up bent plate and (b) roller leveling experiment

14. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: Effect of Roll Configuration on the Leveling Effectiveness of Tail-Up Bent Plate Using Finite-Element Analysis
J. Manuf. Sci. Eng. 2016;138(7): doi: /
Figure Legend:
Comparison of simulated results with experimental results for entry roll gap of 11 mm: (a) case 1 and (b) case 2