1. HL-3000 Product directory

2. 1 specifications specifications 2 camera lenz CMOS Image record
infinite
1minete
illumination
0.1 LUX
event
before and after 10 seconds
angle
140
motion
pixels
3Mpixels
Parking
watch
LED method
Parking mode flashing
Encoding
speed
H.264
etc
POWER
DC 12V~24V
resolution
1280x720p
GPS
External(option)
frame
5~30f/s
preservation temperature
-20℃ ∼ 80℃
record method
infinite,event,motion,manual
Working
temperature
-10℃ ∼ 70℃
sensor
Acceleration
G-sensor
size
102X55X13mm
Record
method
Micro
SD CARD
2GB~32GB
PC operating system
Window XP,VISTA,7
BACK-UP power
Lithum-polymer
10second delay time
viewer
program
Exclusive player
Media player 2

3. 2 Equipment Names Product appearance Front Rear right side left side
GPS
GPS
AV/OUT
Anti-theft LED
Status display
LED
Rear View Camera
Camera lens
Voice Select & Buzzer selection
Power on/off
Cradle lock button
MICRO SD SLOT
DC12V~24V
Format button Manual recording button

4. Package configuration4
Package configuration
Basic Components
Micro SD CARD
Micro SD Adapter
body
Rear View Camera
Car Adapter
User Manual 4

5. 4 product feature . product feature 5
-HD 1280X720P high quality resolution
-a 3.0 megapixel camera
-Paring Recording system; after parking, system will change to parking mode automatically. And if you star to move, parking mode automatically change to driving mode.
-Motion sensor
: it is when the parking mode, system sensor some moving object and people, then they start recording
-Driving mode recording and Event mode recording
: when driving, they recording everything or when event appear, then emergency recording.
-Prevention of thefts: When parking, front LED light flaking automatically. That is help to protect from thefts at the parking lot. 5

6. 4 product feature . product feature 6 -Voice recording option.
: Normally, the product record voice and film. But if you do not want to record voice, then you can press button on the product.
-Simple format system
: At standby mode, If you press middle button about 3 seconds on the product, the SD card will format and become initialization.
-Battery protection
: If your car power voltage below 11.9V, then product power turn off automatically.
-Power on/off
: If you press power button one time, then it will be standby mode and stop the recording. However, if you press one more time, it is turn to driving record mode automatically.
-Smartphone viewer
: If you want to see the film on your smartphone, then take off the micro SD card from body and play on your smartphone easily by exclusive viewer. 6

7. 4 product feature . product feature 7 -Power warranty
: The product included back up battery, and they will keep about before and after 10seconds film when immediately power off.
-Overwrite
: If memory is full, then the product overwrites sources from the oldest film.
Manual recording
: As occasion demands, manual recording can be start if you press button.
-Simple GPS
: If you have support which included GPS, then you can use simple GPS system.
-Free volt power
: all kind of vehicle can be use power freely. (DC 12V-DC24V) 7

8. 4 product feature . product feature 8 -firmware update
: We supported firmware update by SD CARD
Viewer program
: We offer viewer program which can be see front view and rare view at once.
- Temperature protection
: If your car temperature is over or below limited temperature, power will be turn off automatically for protect our product. 8

9. 5 Dedicated viewer 1. Front/back viewer and larger map ⑥ ③ ④ ⑤ ② ① ⑦ ⑧
2. Front/back viewer and small map
3. Capture/Graph/ Recording time set up
4. Back viewer select button
5. Map viewer (When GPS connected)
6. Small/full screen/ close
7. Front/back viewer change button
8. Larger map viewer (When GPSconnected)
9. File lists
10. Flip/Mirror viewer
11. Play status bar
12. Play speed
13. Bright
14. Volume
15. Control button ③ ④ ⑤ ② ① ⑦ ⑧ ⑨ ⑩ ⑪ ⑬ ⑫ ⑭ ⑮ 9

10. 5 Viewer program ♣ ♣ ♣ ⑮ ③ 10 -Recording set up
Pre file
play
stop
next file
Before 10sec
Next 10sec
Slow replay
File open ♣ ③
- photo: Play film makes capture and can be print
-Graph: Show G sensor status
-Recording set up: can be set up G sensor sensitive and recording quality
-Time set up: Set up the black box’s time ♣
-Recording set up
-Driving mode recording time-set up the each file's time.
Normally 60 seconds.
-evant recording time-time-set up the each file's time. Normally 20 seconds.
-Channel - AV out viewer selected between 1ch, and 2ch
-Recording Quality - Set up the Recording Quality
(set up medium when is first power on)
-Voice record select - Select voice recording or not
-Accelerate sensor - Select sensor's sensitivity
-Plays Channel - Select 1ch or 2ch when LCD black box.
-After all set up, press ok bottoms for the save the set up.
-We recommended first set up when the first power on. 10

11. 5 Viewer program ♣ 11 -Set time
: If black box’s time is not same as present, you can change at this section. 11