1. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions
J. Eng. Mater. Technol. 2016;138(2): doi: /
Figure Legend:
Dependency of the constants of the Hollomon equation with Z

2. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions
J. Eng. Mater. Technol. 2016;138(2): doi: /
Figure Legend:
Comparison between the calculated flow curves and the experimental one for some representative curves using Eq. (2)

3. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions
J. Eng. Mater. Technol. 2016;138(2): doi: /
Figure Legend:
Correlation between the stress coefficient and Z along with the comparison between the experimental flow stress and calculated one for some representative curves using Eq. (6)

4. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions
J. Eng. Mater. Technol. 2016;138(2): doi: /
Figure Legend:
Determination of m and correlation between the constants of the modified Fields–Backofen equation and deformation temperature

5. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions
J. Eng. Mater. Technol. 2016;138(2): doi: /
Figure Legend:
Comparison between the calculated flow curves and the experimental ones for some representative curves using Eq. (7)

6. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions
J. Eng. Mater. Technol. 2016;138(2): doi: /
Figure Legend:
Basic constitutive analysis

7. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions
J. Eng. Mater. Technol. 2016;138(2): doi: /
Figure Legend:
Some representative optical micrographs showing the original microstructure and the microstructure of a sample that was immediately water-quenched after deformation to suppress the static restoration processes. The grain boundaries of the prior austenite in the martensite were revealed by electrolytic etching in 60% HNO3 solution at 2 V.

8. Date of download: 11/6/2017
Copyright © ASME. All rights reserved.
From: A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions
J. Eng. Mater. Technol. 2016;138(2): doi: /
Figure Legend:
Flow curves at different deformation conditions