1. PCB Design and Construction
Eric Chung

2. Quarter Goals:
Finish PCB design, send out for manufacturing, and order parts
Build and test all the boards
Move board designs to Altium+start working on next design
Design simple board-to-board adapter card

3. What actually happened
Finish building the cards (except the regulators)
Finished testing the SEABAS card
Can’t get access to Altium
Working on board to board adapter
3.3V regulator card not working
Started reading through High-Speed Digital Design book

4. Finalizing board design

5. Building the Cards 2V regulator card 3.3V regulator card
SEABAS/T3MAPS adapter card

6. Testing SEABAS adapter card
Tested all channels’ outputs at 5MHz with BNC probe
Tested channel 7 at 5, 10, 20, and 30MHz with BNC probe
Tested channel 7 and channel 1 at 1, 10, 30 MHz with TEK probe
Ch. 0 5MHz with BNC probe

7. Tests with TEK probe
Ch7 1MHz
Ch7 10MHz

8. Tests with TEK probe
Ch7 30MHz

9. Board-to-board adapter
Connects Atlys FPGA to Multi I/O

10. Next Steps Working on next design for adapter cards
Troubleshooting problems with regulator cards
Working through High-Speed Digital Design book