2. UAW Assistant Director Health & Safety
Rick O’Donnell
UAW Assistant Director Health & Safety
Ken Glass
GM Assistant Director Health & Safety

3. 2017 Black Lake Training Overview
Process Crane Safety & Technologies
Building an Emergency Response Team: presented by the Defiance Ohio UAW-GM ERT team, will include several “mock” rescue scenarios.
Energy Control Safe Operating Procedure
Introduction to Industrial Hygiene for Safety Professionals
G-Comply Awareness
CPR Training and Certification
Employee Safety Concern Process Overview
Building Effective Joint Skilled Trade Safety Committee Process
Exciting Closing Session
Ken
35 Total new classes
Joint Leadership…..Union-Management Collaboration to an Improved Safety Culture: presented by UAW and MillerCoors Brewing. Trenton, OH
Building an Emergency Response Team: presented by the Defiance Ohio UAW-GM ERT team, including conducting several “mock” rescue scenarios.
Top 10 – MIOHSA Health & Safety Citations
Managing Diversity for Safety and Health Excellence
In the Killing Zone: The Management of Risk is Different

4. 2016 & 2017 Health & Safety Training Review

5. 2016 Overall Training Summary
Ken:
In Summary throughout this past year the health & Safety department at the CHR have put in many hours of training preparation
and conducted many hours of training for close to 1500 participants.
412 participants were trained at Black Lake
792 participants were trained at the Center of Human Resources
140 participants were trained by UNC for Industrial Hygiene Certification

6. 792 Registered Participants
2016 CHR Training Summary
Fall Hazard
137
GM Medgate Cognos 17
Safe Die Handling 10
ESWP 26
G-Risk (TaBRA) 15
Fork Truck Safety 37
Initial H&S Training
Bloodborne 35
Confined Space
First Aid / CPR / Instructor 46
Asbestos Safety 4
Rigging Safety 21
PET 19
Secondary Analysis Tools 16
Hazard Recognition 15
Mobile Crane 14
Lockout 28
3DSSPP
Laser Awareness 12
Confined Space Supv. 27
Crane Safety 21
G-Plac 14
Hazard Communication 17
Basic IH 64
Aerial Lift 22
Robotics
Rick:
Every year the CHR provides a significant number of health and safety trainers with T-3/ Practitioners courses.
Our largest class request are Fall Hazard Competent Inspector, Confined Space and CPR
Remember that people are expected to attend scheduled courses once enrolled.
NO shows have improved over the past couple of years. Please continue to do your best to attend class once registered.
Please make appropriate notification if the need arises for you to cancel.
Also remember that it is important to verify that people who attend training have completed required prerequisites (course work and medical evaluations if necessary) prior to sending trainers to the CHR for T-3 training
792 Registered Participants

7. 2017 YTD CHR Training Summary
Fall Hazard 67
GM Medgate Cognos 16
Safe Die Handling 8
ESWP 15
G-Risk (TaBRA) 12
Fork Truck Safety 21
Initial H&S Training
Bloodborne 34
Confined Space 19
First Aid / CPR / Instructor 27
Asbestos Safety
Rigging Safety 21
PET 7
Secondary Analysis Tools 8
Hazard Recognition 12
Mobile Crane
Lockout 36
3DSSPP 15
Laser Awareness 14
Confined Space Supv. 40
Crane Safety 11
G-Plac 24
Hazard Communication 12
Basic IH
Aerial Lift 17
Robotics
Ken:
Here is a look at 2017 year to date
Like last year we have continued to see a strong request for Fall Hazard courses, Confined Space and CPR.
We will be putting on Aerial Lift and Mobile Crane during the upcoming summer months.
621 Registered Participants

8. CHR Health & Safety Department Training 2017 Highlights
UNC Joint Industrial Hygiene Training:
The week of April 24, the CHR hosted the final session of the University of North Carolina Industrial Hygiene Technician Certificate Program. 48 of our UAW-GM IH Technicians completed the 80 hour program.
Ken
Improving the skills of our joint IH Teams through the University of North Carolina at the CHR.
Each IH participant was certified by the university.

9. CHR Health & Safety Department Training 2017 Highlights
Energy Control Safe Work Practice Workshops were conducted by our joint Teams at Ft. Wayne & Lordstown.
The CHR sent a Joint Team to Flint Metal Center to conduct a LOCKOUT WORKSHOP and Safety Culture Assessment.
Launch Support at Bowling Green Assembly: CHR sent a team of UAW G- Comply trainers to assist with the Red Tag Buyoff process for launch.
Our joint Ergo. teams conducted a Ergonomic pilot program for the “Lumbar Motion Monitor” at Ft. Wayne Assembly to collect sprain and strain data.
Rick
The CHR has responded to plant request for all kinds of H&S issues. We have provided resources whenever possible for example:
Energy Control Safe Work Practice Workshops were conducted by our joint Teams at Ft. Wayne & Lordstown.
The CHR sent a Joint Team to Flint Metal Center to conduct a LOCKOUT WORKSHOP and Safety Culture Assessment.
Launch Support at Bowling Green Assembly: CHR sent a team of UAW G-Comply trainers to assist with the Red Tag Buyoff process for launch.
Our joint Ergo. teams conducted a Ergonomic pilot program for the “Lumbar Motion Monitor” at Ft. Wayne Assembly to collect sprain and strain data. There will be a presentation this week during Ergonomic Update Session of the findings.

10. Rick:
Remember this nice picture we took as a team during our April training!!!

11. Initial Health and Safety Training
New Health and Safety Representatives
New Health and Safety Supervisors
This year’s training will incorporate OSHA 10 hr. Certification
To be held in December
Ken

12. Health and Safety Audit Performance Update

13. 2016 Top Findings (Total of 48 Deficiencies/Repeats)
Other Deficiencies not Identified:
Asbestos
Crane/Hoist Inspection
Ergonomics
H&S Training
Hazcom
Lockout
Material SS
Operator Ins.
Planned Maintenance
Review of Tech
Sanitation
Sling/Below the Hook/ Rigging
Stairs & Ladders
Vehicle Planned Maintenance
Rick
For 2016 we completed 57 audits
On this chart the red bar represents Needs Improvement and the green represents Repeat Needs Improvements.
We have graphed the top 5 findings.
Other areas of deficiencies in 2016 were Hazcom, Lockout, Material Storage and Stacking and other audit modules that need improvement.
In past years Electrical Safety and Confined Space were the issues we now see significant improvement.
Note: Based on 57 Audits reporting does not include CHR’
June 2,2017
cf:opeiu459aflico

14. 2017 YTD Top Findings (Total of 21 Deficiencies)
Other Deficiencies not Identified:
Aerial Lifts/Elevating
Electrical Safety
Elevator Inspection
H&S Training
Planned Maintenance
Rail Car&Truck
Review of Tech
Sling/Below the Hook/ Rigging
Welding/ Other Hot Work /Cutting
Ken
To date this year there have been 12 audits completed.
We have identified 13 needs improvements during the 12 audits.
However needs improvement are the not the only things we find during a audit. Our auditors find hundreds deficiencies during audits. The findings are tracked in a database that show before and after photographs. This is part of our joint audit teams coaching approach and sharing of best practices to improve the safety culture in all of our worksites.
Highlighted are the top 3 findings of those audits. However, we have identified findings in Lockout, H&S training, elevator inspection, other audit modules that need improvement.
It has been great to see this year we have seen improvement in Welding/Hot Work as well as Confined space (one of the Given)
Remember as you continue to prepare for your upcoming audit we will be changing over to Performance Standards……
Note: Based on 12 Audits reporting does not include CHR’
June 2,2017
cf:opeiu459aflico

15. Global Safety Week August 29 – September 2, 2016
Rick and Ken
When you have a moment take a look at the banners located throughout the CHR reflecting 2015 and 2016 Global Safety Week.
2017 Safety Week will be the Week of Aug 29 – Sept 2
Informational packets will be forwarded to you shortly