1. T3MAPS Summer Update
Yedi Luo & Raymond Mui 1

2. Updates 2

3. Adapter Card Malfunction
Adapter card was completely powered off
Adapter card was connected with the Multi I/O Board
One ground oscilloscope probe pin stuck under the GD pin (Shown in the picture above)
After no more than 30 seconds , the SMD capacitor C13 discharged and sparked
C13 is shorted to ground
Digital ground VDD and digital input voltage DVVDIN and VDDA are all shorted together 3

4. What Now? Latency issues with firmware Unified Python
Further research on SiTCP----increase the speed of the system
Max’s new firmware design 4

5. New Design Use FPGA RAM to directly map registers
Abstract away the use of low level shift register
Focus: Solve Latency Issues and Unified Python Script
Further discussion with Max on implementation 5

6. Working Schedule Tuesdays: 9AM – 2PM Thursdays: 9AM – 2PM
Weekends: If needed
Contact Information:
Yedi Luo:
Raymond Mui: 6

7. Thank you ! 7