1. BRIDGES MOST IMPORTANT GEOTECHNICAL EFFECT- LIQUEFACTION
RAPID EXPANSION
DEPENDENCY ON ROAD RAIL NET WORK
MOST IMPORTANT GEOTECHNICAL EFFECT- LIQUEFACTION
FAILURE OF FOUNDATION - STRUCTURE COLLAPSE

2. CLASSIFICATION
FLOW LIQUEFACTION
CYCLIC MOBILITY
Static shear stress are slightly less than liquefied shear strength,but static
+dynamic stresses are greater than shear strength of liquefied soil.
Static shear stress exceeds shear strength of liquefied soil.

3. The risk to public safety.
2. The importance of the structure (lifeline, economic recovery, military).
3. The cost of the structure (capital investment and future replacement costs).
4. The cost of mitigation measures.
The policy further specifies that, “All bridges should be evaluated for liquefaction and lateral spread potential and the possible effects of these conditions on the structure.” Consideration is given to the magnitude of the anticipated lateral soil deformation, the influence of piles on embankment deformations, and tolerable deformation limits of the structures under consideration. Close coordination between the geotechnical engineer and the bridge design engineer is required.

4. LIQUEFACTION-INDUCED BRIDGE DAMAGE
Lateral soil deformations (lateral spreading) have proven to be the most pervasive type of liquefaction-induced ground failure (Youd 1993). Lateral spreading involves the movement of relatively intact soil blocks on a layer of liquefied soil toward a free face or incised channel. These blocks are transported down-slope or in the direction of a channel by both dynamic and gravitational forces. The amount of lateral displacement typically ranges from a few centimeters to several meters and can cause significant damage to engineered structures.

6. EFFECTS ON BRIDGE GROUND FAILURE LATERAL DISPLACEMENT SETTLEMENT
ABUTMENTS ARE VULNERABLE TO SEISMIC
DAMAGE

8. SOIL LIQUEFACTION LOSS OF BEARING CAPACITY
LATERAL MOVEMENT OF SUBSTRUCTURE
DISLODGEMENT OF SUPER STRUCTURE

10. 60% INDIA’S LAND HIGH SEISMIC ZONE AFFECT SOCIAL & FINANCIAL STATUS
EARTHQUAKE
SEISMIC RISK
LARGE SCALE DEVELOPMENT -
60% INDIA’S LAND HIGH SEISMIC ZONE
DAMAGE TO STRUCTURE
AFFECT SOCIAL & FINANCIAL STATUS
LOSS OF MANY LIVES

11. For most bridges at river crossings subjected to medium- to high-intensity earthquake motions -liquefaction primary cause
reduced stability of earth structures
increased active pressures on abutments
loss of soil strength and the seismic inertia of the backfill
loss of passive soil resistance

12. impacts from liquefaction
Lateral ground displacements have been extremely damaging to bridge foundations and abutments.
2. Movement of foundation elements may create large shear forces and bending moments at connections and compressional forces in the superstructure.
Subsidence and increased lateral earth pressures can also lead to deleterious consequences for bridge foundations. Waterfront retaining structures, especially in areas of reclaimed land, can experience large settlements and lateral earth pressures adjacent to bridge foundations. These movements lead to the rotation and translation of bridge abutments and increased lateral forces on pile foundations.
5. A number of failure modes may occur in pile foundations, depending on the conditions of fixity, pile reinforcement and ductility. Generally, if concrete piles were well embedded in the pile caps, shear or flexural cracks occurred at pile heads, often leading to failure; if steel pipe piles were fixed tightly in the pile caps, failure was at the connection or pile cap; or if the pile heads were loosely connected to the pile caps, they either rotated or were detached.

13. PILE FAILURE